Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX238EWG+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	10000 ns
MAX3030EESE+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	2 V	0 ns
MAX3076EESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		50 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	75 ns
MAX3076EESD+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		50 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	75 ns
MAX3082CPA+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS		2600 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.000125 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	9.375 mm	2 V	200 ns
MAX3095CSE+	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			EIA-485; EIA-422	3.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4		NO	e3	30	260	9.9 mm		98 ns
MAX3096ESE+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-422; EIA-423; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4			e3	30	260	9.9 mm		123 ns
MAX3222CAP+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232; TIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e3	30	260	7.2 mm	10 V	0 ns
MAX3222ECAP+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	7.2 mm	10 V	0 ns
MAX3222ECWN+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP18,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G18	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	11.55 mm	10 V	0 ns
MAX3223CAP+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP; AUTO SHUTDOWN	NO	e3	30	260	7.2 mm	10 V	0 ns
MAX3223CUP+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	6.5 mm	5 V	0 ns
MAX3227EAE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		1		NO	e3	30	260	6.2 mm	10 V	0 ns
MAX3232EEWE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	0 ns
MAX3243CAI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel		3-STATE	0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; AUTO SHUTDOWN	NO	e3	30	260	10.2 mm	5 V	0 ns
MAX3394EEBL+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	BALL	9	VFBGA	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			GENERAL PURPOSE		STANDARD	3.3 V		1.8/5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,20		Other Interface ICs		1.65 V	.5 mm	85 Cel			-40 Cel	1	TIN SILVER COPPER NICKEL	BOTTOM	S-PBGA-B9	1	.67 mm	1.6 mm	Not Qualified			1		NO	e2	30	260	1.6 mm		0 ns
MAX3441EAPA+	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		60 ns	EIA-422; EIA-485; TIA-485	10 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	1 Amp		1		YES	e3	30	260	9.375 mm	1.5 V	85 ns
MAX4445ESE+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						SCHMITT TRIGGER	5 V	-5.5 V			SMALL OUTLINE		-4.5 V			4.5 V	1.27 mm	85 Cel	-5 V		-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e3	30	260	9.9 mm		0 ns
MAX487EEPA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.000002 Amp	4.75 V	2.54 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	9.375 mm	1.5 V	2000 ns
MAX489EESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	8.65 mm	1.5 V	2000 ns
MAX490EPA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS		60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.000002 Amp	4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	9.375 mm	1.5 V	150 ns
MAX96701GTG/V+T	Analog Devices	LINE DRIVER		NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		GENERAL PURPOSE	88 mA	STANDARD	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20				1.7 V	.5 mm	115 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	1	.8 mm	4 mm		2 Amp	COMPLEMENTARY			YES	e3	30	260	4 mm	.24 V
MAX96706GTJ/V+T	Analog Devices	LINE RECEIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				1.7 V	.5 mm	115 Cel		OPEN-DRAIN	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp		1		NO	e3	30	260	5 mm
PMAD233JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO							10 mA		5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified	1.6 Amp				NO	e0				10 V
AD45048ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	6 V		+-6/+-12	-6 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		1.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					NO	e3		260	4.9 mm	11.25 V	0 ns
AD8324JRQ	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel			-25 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e0		240	8.6614 mm		0 ns
AD239JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232-C; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	10.8 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0			15.4 mm	10 V	0 ns
AD8328ACP-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
LT1281AIN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		2	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDIP-T16	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0					600 ns
PMAD237AR	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS				10 mA		5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	1.6 Amp				NO	e0				10 V
AD8328ACP	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
LT1281AISW#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		NO	e3	30	260	10.3 mm		600 ns
AD8019ARU-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		12/+-12	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		4 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified					NO	e0		240	5 mm	10.8 V	0 ns
PMAD237JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS				10 mA		5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
AD234AQ	Analog Devices	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	CMOS			EIA-232-C; V.28	10 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED			NO	e0				10 V	0 ns
AD8326ARE	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	3	1.05 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm		0 ns
AD231AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232-C; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V		-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0			10.3 mm	10 V	0 ns
LT1342CJ	Analog Devices		COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				17 mA				3.3,5		IN-LINE	DIP28,.6		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel			0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T28				Not Qualified	1.6 Amp				NO	e0				10 V	600 ns
PMAD235AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS				10 mA		5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
ADM5170JNZ	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.000001 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	8	MATTE TIN	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3			37.4 mm	9 V	0 ns
D8328ARQZ	Analog Devices	LINE DRIVER
AD7306JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	3	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e0	30	240	15.4 mm	10 V	200 ns
LT1331CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	5 V	3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e3	30	260	10.2 mm		600 ns
AD237JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	CMOS			EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0			30.45 mm	10 V	0 ns
AD8322ARU	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e0		240	9.7 mm
AD8327ARU-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified					NO	e0		240	6.5 mm		0 ns
LT1330CSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER					SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	IT ALSO WORKS AT 5 VOLTS; ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e3	30	260	17.9 mm		600 ns
AD231JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232-C; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V		0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0			10.3 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.