Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC1519IS#PBF	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS		EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	85 Cel		-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4			e3	30	260	9.9 mm		25 ns
LTC1520CS#PBF	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS		GENERAL PURPOSE	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE					1.27 mm	70 Cel	3-STATE	0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE	4			e3	30	260	9.9 mm		21 ns
LTC1686CS8#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	22 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	4.9 mm		22 ns
LTC1689IS#PBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		12 ns	EIA-422; EIA-485		STANDARD	5 V		SMALL OUTLINE				3 V	1.27 mm	85 Cel		-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm
LTC1690CS8#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	60 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	4.9 mm		160 ns
LTC1690IS8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	60 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	4.9 mm		160 ns
LTC2801CDE#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				1.8 V	.5 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		NO	e3	30	260	4 mm		400 ns
LTC2801CDE#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				1.8 V	.5 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		NO	e3	30	260	4 mm		400 ns
LTC2846CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3		2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel		0 Cel	3	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified			3		YES	e3	30	260	12.8 mm		300 ns
LTC2846IG#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3		2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, SHRINK PITCH					.65 mm	85 Cel		-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified			3		YES	e3	30	260	12.8 mm		300 ns
LTC2850MPDD#PBF	Analog Devices		MILITARY	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		3.3 V	3.3	SMALL OUTLINE	SOLCC8,.11,20	Line Driver or Receivers			.5 mm	125 Cel		-55 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N8	1			Not Qualified	4 Amp				YES	e3	30	260		1.5 V	70 ns
LTC2851IDD#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2852IS#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE				3 V	1.27 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.752 mm	3.899 mm	Not Qualified			1		YES	e3	30	260	8.649 mm		70 ns
LTC2852MPS#PBF	Analog Devices		MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		3.3 V	3.3	SMALL OUTLINE	SOP14,.25	Line Driver or Receivers			1.27 mm	125 Cel		-55 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1			Not Qualified	4 Amp				YES	e3	30	260		1.5 V	70 ns
LTC2856CDD-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				4.5 V	.5 mm	70 Cel		0 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2858CMS-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.5 V	.5 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2858HDD-1#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				4.5 V	.5 mm	125 Cel		-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e3			3 mm		70 ns
LTC2858IMS-1#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.5 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2859HDD#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				4.5 V	.5 mm	105 Cel		-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm				1		YES	e3	30	260	3 mm		70 ns
LTC2859IDD#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				4.5 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2862MPS8-1#PBF	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	50 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE				3 V	1.27 mm	125 Cel		-55 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2864CS-2#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE				3 V	1.27 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.752 mm	3.899 mm				1		YES	e3	30	260	8.649 mm		65 ns
LTC2864MPS-2#PBF	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE				3 V	1.27 mm	125 Cel		-55 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.752 mm	3.899 mm				1		YES	e3	30	260	8.649 mm		65 ns
LTC2876CMS8E#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.00002 Amp	4.5 V	.65 mm	70 Cel	DIFFERENTIAL	0 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3	30	260	3 mm		70 ns
LTC2876HDD#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,20		.00002 Amp	4.5 V	.5 mm	125 Cel	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8		.8 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3			3 mm		70 ns
LTC2877HMSE#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.00002 Amp	4.5 V	.5 mm	125 Cel	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10		1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3			3 mm		70 ns
LTC2879XMS8E#TRPBF	Analog Devices	LINE TRANSCEIVER		GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH				3 V	.65 mm				1		DUAL	S-PDSO-G8		1.1 mm	3 mm				1		YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		75 ns
LTC486CSW#PBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS	50 ns	EIA-422; EIA-485		STANDARD	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	2.642 mm	7.493 mm	Not Qualified					YES	e3	30	260	10.299 mm
LTC487CN#PBF	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	CMOS	50 ns	EIA-422; EIA-485		STANDARD	5 V		IN-LINE				4.75 V	2.54 mm	70 Cel		0 Cel	4	MATTE TIN	DUAL	R-PDIP-T16	1	3.81 mm	7.62 mm	Not Qualified					YES	e3	30	260
LTC487CSW	Analog Devices	LINE DRIVER		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS		EIA-449; EIA-530; V.35		STANDARD	5 V		SMALL OUTLINE					1.27 mm				4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e0	20	235	10.3 mm
LTC487ISW#PBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS	50 ns	EIA-422; EIA-485		STANDARD	5 V		SMALL OUTLINE				4.75 V	1.27 mm	85 Cel		-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	2.642 mm	7.493 mm	Not Qualified					YES	e3	30	260	10.299 mm
LTC488CSW#PBF	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		EIA-422; EIA-485		DIFFERENTIAL	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e3	30	260	10.3 mm		55 ns
LTC489ISW#PBF	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		EIA-422; EIA-485		DIFFERENTIAL	5 V		SMALL OUTLINE				4.75 V	1.27 mm	85 Cel		-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e3	30	260	10.3 mm		55 ns
LTC490CN8#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		IN-LINE				4.75 V	2.54 mm	70 Cel	TOTEM-POLE	0 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	3.937 mm	7.62 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260			150 ns
LTM2884HY#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	BALL	44	XMA	SQUARE	UNSPECIFIED	YES	16.5 V	2	HYBRID			100 mA	DIFFERENTIAL SCHMITT TRIGGER	12 V		MICROELECTRONIC ASSEMBLY				4.4 V	1.27 mm	105 Cel	DIFFERENTIAL	-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-XXMA-B44	4	5.22 mm	15 mm			TRUE	2		YES	e1	30	245	15 mm
MAX13081ECSA+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	1800 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	2 V	200 ns
MAX13081EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	1800 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	2 V	200 ns
MAX13087EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm		80 ns
MAX13412EESA+T	Analog Devices		INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES						10 mA			6/28	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers			1.27 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1			Not Qualified	1 Amp				YES	e3	30	260		1.5 V	0 ns
MAX14776EATA+T	Analog Devices	LINE TRANSCEIVER																											Matte Tin (Sn) - annealed			1									e3	30	260
MAX14781EESA+	Analog Devices	LINE TRANSCEIVER																											Matte Tin (Sn) - annealed			1									e3	30	260
MAX14782EATA+T	Analog Devices	LINE TRANSCEIVER																											Matte Tin (Sn) - annealed			1									e3	30	260
MAX14828ATG+T	Analog Devices	LINE TRANSCEIVER																											Matte Tin (Sn) - annealed			1									e3	30	260
MAX14829ATG+	Analog Devices	LINE TRANSCEIVER																											Matte Tin (Sn) - annealed			1									e3	30	260
MAX1487ECSA+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	70 Cel		0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	200 ns
MAX220CSE+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	2 mA	SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP16,.25	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	9.9 mm	10 V	3000 ns
MAX231CPD+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V	5,12	IN-LINE	DIP14,.3	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	TOTEM-POLE	0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T14	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	19.05 mm	10 V	10000 ns
MAX234CPE+	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V	5	IN-LINE	DIP16,.3	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e3	30	260	19.175 mm	10 V	10000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.