Maxim Integrated Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX9205EAI+C9G	Maxim Integrated	LINE DRIVER																												MATTE TIN			1									e3	30	260
MAX9321AESA+T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V		SMALL OUTLINE				2.25 V	1.27 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN OPERATE WITH A -2.25V TO -3.8V SUPPLY IN LVECL MODE	YES	e0			4.9 mm		0 ns
DS229N+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.24; V.28	15 mA	SCHMITT TRIGGER	5 V	5	IN-LINE	DIP20,.3	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		-40 Cel	3	MATTE TIN	DUAL	R-PDIP-T20	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp		3	EXTERNAL CHARGE PUMP	NO	e3	30	260	26.16 mm	5 V	1000 ns
MAX9122ESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4			e0			9.9 mm		2.7 ns
MAX9405EGJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR		.437 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	2.5/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		2.375 V	.5 mm	85 Cel		-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N32	1	1 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
MAX9405EHJ-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		.437 ns	GENERAL PURPOSE	180 mA	DIFFERENTIAL	3.3 V	2.5/5	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Line Driver or Receivers		2.375 V	.5 mm	85 Cel		-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
MAX9238EUM+T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	177 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4			e3			12.5 mm		0 ns
DS1229	Maxim Integrated		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS				10 mA		5 V	5	IN-LINE	DIP20,.3	Line Driver or Receivers			2.54 mm	70 Cel		0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified	3.2 Amp				NO	e0				4 V
MAX9125EUE-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel		-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified			4			e0			5 mm		3.3 ns
MAX9158EGM	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	44	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4	CMOS		2.5 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC44,.28SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N44	1	.8 mm	7 mm	Not Qualified	4 Amp		4		YES	e0	20	240	7 mm	.25 V	3.5 ns
MAX9240GTM/V+T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			90 mA		1.8 V	1.8	CHIP CARRIER	LCC48,.28SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
DS276E	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232-E		SCHMITT TRIGGER	3 V		SMALL OUTLINE				2.7 V	1.27 mm	70 Cel		0 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1		NO				4.9 mm
MAX9214EUM-TD	Maxim Integrated	LINE RECEIVER																																									NOT SPECIFIED	NOT SPECIFIED
MAX9110ESA-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.3	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			4.9 mm	.25 V	0 ns
MAX9220EUM+D	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.5 mm	85 Cel		-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e3	30	260	12.5 mm		0 ns
MAX9315EUP	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	BIPOLAR		.44 ns	GENERAL PURPOSE		STANDARD	2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				2.375 V	.65 mm	85 Cel		-40 Cel	5	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified				-2.375V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL OPERATION	YES	e0			6.5 mm		0 ns
MAX9258GCM+T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS						3.3 V	3.3	FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel			QUAD	S-PQFP-G48				Not Qualified							NOT SPECIFIED	NOT SPECIFIED
MAX9402EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		.437 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	2.5/5	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Line Driver or Receivers		2.375 V	.5 mm	85 Cel		-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
MAX9395EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BIPOLAR		.72 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V		FLATPACK, THIN PROFILE, FINE PITCH				3 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			1		YES	e0			5 mm		.72 ns
DS229E	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.24; V.28	15 mA	SCHMITT TRIGGER	5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Line Driver or Receivers		4.5 V	.65 mm	70 Cel		0 Cel	3	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified	3.2 Amp		3	EXTERNAL CHARGE PUMP	NO	e0		245	6.5 mm	5 V	1000 ns
MAX562CAI-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		1700 ns	EIA-232; EIA-562	33 mA	SCHMITT TRIGGER	5 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		2.7 V	.65 mm	70 Cel	3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			10.2 mm	7.4 V	500 ns
MAX9316EWP	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	BIPOLAR		.44 ns	GENERAL PURPOSE		STANDARD	3.3 V		SMALL OUTLINE				3 V	1.27 mm	85 Cel		-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified				-3V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL OPERATION	YES	e0			12.8 mm		0 ns
MAX9213EUM-D	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-644; TIA-644		STANDARD	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
MAX9209EUM+	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-644; TIA-644		STANDARD	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e3	30	260	12.5 mm		0 ns
MAX560CWI-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-562	8 mA	SCHMITT TRIGGER	3.3 V	3.3	SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		3 V	1.27 mm	70 Cel	3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		245	17.9 mm	7.4 V	10000 ns
MAX9246EUM+	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e3	30	260	12.5 mm		0 ns
MAX9244GUM/V+	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			3		YES	e3	30	260	12.5 mm		0 ns
MAX9280GTN/V+	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	56	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			305 mA			1.8/3.3,3.3	CHIP CARRIER	LCC56,.31SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		MATTE TIN	QUAD	S-PQCC-N56	3			Not Qualified						e3	30	260			0 ns
MAX9257GCM/V+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQFP-G48	1	1.6 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX560CWI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-562	8 mA	SCHMITT TRIGGER	3.3 V	3.3	SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		3 V	1.27 mm	70 Cel	3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		245	17.9 mm	7.4 V	10000 ns
MAX9257GTL/V+T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100					3.3 V	3.3	CHIP CARRIER	LCC40,.2SQ,16	Line Driver or Receivers			.4 mm	105 Cel		-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260
MAX9244EUM+	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e3	30	260	12.5 mm		0 ns
DS275E+T&R	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232-E		SCHMITT TRIGGER	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.5 V	.65 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified			1		NO	e3	30	260	5 mm		0 ns
MAX9400EGJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR		.437 ns	GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V	2.5/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		2.375 V	.5 mm	85 Cel		-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N32	1	1 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
MAX9170EUE+T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		3.2 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel		-40 Cel	1	TIN	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3			5 mm		3.2 ns
MAX9395EHJ+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BIPOLAR		.72 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V		FLATPACK, THIN PROFILE, FINE PITCH				3 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			1		YES	e3	30	260	5 mm		.72 ns
MAX9240GTM+	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				90 mA		1.8 V	1.8	CHIP CARRIER	LCC48,.28SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260			0 ns
MAX9164EUD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		7 ns	EIA-644; TIA-644	12.5 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified	2 Amp		1		YES	e0		245	5 mm	.25 V	9 ns
MAX9173ESE+	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644; IEEE 1596.3	15 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4			e3	30	260	9.9 mm		2.7 ns
MAX9208EAI-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	100 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			1			e0			10.2 mm		0 ns
MAX9234EUM+TD	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	98 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4			e3			12.5 mm		0 ns
MAX9222EUM-TD	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.5 mm	85 Cel		-40 Cel			DUAL	R-PDSO-G48		1.1 mm	6.1 mm	Not Qualified			4		NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm
MAX9179EUE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	4 Amp		4			e0			5 mm		4.6 ns
MAX562CWI+T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		1700 ns	EIA-232; EIA-562	33 mA	SCHMITT TRIGGER	5 V		SMALL OUTLINE				2.7 V	1.27 mm	70 Cel	3-STATE	0 Cel	3	TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3			17.9 mm		500 ns
MAX9234EUM+D	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	98 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4			e3			12.5 mm		0 ns
MAX9249GCM/V+TGG5	Maxim Integrated	LINE RECEIVER																												MATTE TIN			3									e3	30	260
MAX9123EUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		1.7 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel	3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	.25 V	0 ns
MAX9248ETM+T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1		YES	e3			6 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.