Maxim Integrated Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX9210ETM	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3,3.3/5		CHIP CARRIER, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQCC-N48	1	.8 mm	7 mm	Not Qualified			4		NO	e0			7 mm		0 ns
MAX9121ESE-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			4			e0			9.9 mm		2.7 ns
MAX9403EHJ-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		.437 ns	GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V		2.5/5		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP32,.28SQ		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
DS232AR+T&R	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.24; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e3	30	260	9.9 mm		1000 ns
MAX9405EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		.437 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		2.5/5		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP32,.28SQ		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
MAX9215EUM	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-644; TIA-644	108 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
MAX9254EUM/V+T	Maxim Integrated	LINE RECEIVER																																			3
MAX9259GGN+T	Maxim Integrated	LINE DRIVER																																MATTE TIN			3									e3	30	260
MAX9157EGJ+T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4	CMOS		2.5 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N32	1	1 mm	5 mm	Not Qualified			4		YES	e0			5 mm		4.1 ns
MAX9214EUM-D	Maxim Integrated	LINE RECEIVER																																													NOT SPECIFIED	NOT SPECIFIED
MAX9178ETE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	4	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified					YES	e0			4 mm	.25 V	0 ns
MAX9124ESE+	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm
MAX9125ESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4			e0			9.9 mm		3.3 ns
MAX9238EUM-TD	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	177 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4			e0			12.5 mm		0 ns
DS275N	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS			EIA-232-E		SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified			1		NO				9.375 mm		0 ns
MAX9242EUM/V+	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		EIA-644; TIA-644		STANDARD	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			3		YES	e3	30	260	12.5 mm		0 ns
DS276S/T&R/C03	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232-E		SCHMITT TRIGGER	3 V				SMALL OUTLINE					2.7 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1		NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
MAX9173EUE-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644; IEEE 1596.3	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	4 Amp		4			e0			5 mm		2.7 ns
MAX9213ETM	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS			EIA-644; TIA-644	108 mA	STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified					YES	e0			7 mm		0 ns
MAX561CAI-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-562	8 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		245	10.2 mm	7.4 V	10000 ns
MAX9236EUM	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	98 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e0			12.5 mm		0 ns
MAX9242EUM-TD	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS					STANDARD	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified						e0			12.5 mm		0 ns
MAX9129EUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		3 ns	GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm
MAX9129EGE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	16	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		3 ns	GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3 V	.65 mm	85 Cel			-40 Cel	4		QUAD	S-PQCC-N16		1 mm	4 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	4 mm
MAX9279GTN+T	Maxim Integrated	LINE DRIVER																																MATTE TIN			3									e3	30	260
DS232AR	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.24; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2	EXTERNAL CHARGE PUMP	NO	e0		245	9.9 mm	10 V	1000 ns
MAX9321AEUA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.25 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN OPERATE WITH A -2.25V TO -3.8V SUPPLY IN LVECL MODE	YES	e0			3 mm		0 ns
MAX9480CUP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e0			6.5 mm		0 ns
MAX9115EXK+T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G5	1	1.1 mm	1.25 mm	Not Qualified			1			e3	30	260	2 mm		3 ns
MAX9401EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V		3.3/5		FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e0			5 mm		0 ns
MAX9209GUM+D	Maxim Integrated	LINE DRIVER																																													NOT SPECIFIED	NOT SPECIFIED
MAX9240GTM+T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				90 mA		1.8 V		1.8		CHIP CARRIER	LCC48,.28SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
DS275+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS			EIA-232-E	.1 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp		1		NO	e3	30	260	9.375 mm	12 V	0 ns
MAX9214EUM+T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	186 mA	DIFFERENTIAL	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e3			12.5 mm		0 ns
MAX9482EUI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	NO	e0		245	9.7 mm		0 ns
MAX9316EUP	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	BIPOLAR		.44 ns	GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified				-3V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL OPERATION	YES	e0		245	6.5 mm		0 ns
MAX9218ECM-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e0			7 mm		0 ns
MAX9234EUM+	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	98 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e0			12.5 mm		0 ns
MAX9210EUM+D	Maxim Integrated	LINE RECEIVER																																			3
MAX9124EUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	.25 V	0 ns
MAX561CWI+	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3			17.9 mm		10000 ns
MAX9254EUM+T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS					STANDARD	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified						e3	30	260	12.5 mm		0 ns
MAX9220EUM-D	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G48		1.1 mm	6.1 mm	Not Qualified			4		NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		0 ns
MAX9154EUI+T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	MATTE TIN	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		0 ns
MAX9238EUM+	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	177 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e3	30	260	12.5 mm		0 ns
MAX9217ETM	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE		STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16		Line Driver or Receivers		3 V	.4 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified					YES	e0			6 mm		0 ns
MAX9215ETM	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS			EIA-644; TIA-644	108 mA	STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified					YES	e0			7 mm		0 ns
MAX9123ESE+T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			1.7 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3			9.9 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.