LOW SKEW CLOCK DRIVER Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN65LVELT22DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TR	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EL
SN65EL11DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					5	+-5		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	4.9 mm	65EL
SNCDC208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
CDC329ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	POLARITY CONTROL SELECTS TRUE OR COMPLEMENTARY OUTPUTS	e4	30	260	9.9 mm	329
CDC3RL02BYFPR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	STANDARD	1					1.8			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.4 mm	85 Cel			-40 Cel	TIN SILVER COPPER	2	BOTTOM		52 MHz	R-XBGA-B8	1		.5 mm	.76 mm						e1	30	260	1.56 mm	CDC
SNCDC111FN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL				3.3			0	CHIP CARRIER		.6 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD			S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified		3 V	80 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
CDC208NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
SN54CDC341FKR	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	1	BICMOS				5			0	CHIP CARRIER		7 ns			1.27 mm	125 Cel		.8 ns	-55 Cel		8	QUAD		33 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified		4.5 V						8.89 mm	CDC
SNCDC392DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC209DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5			0	SMALL OUTLINE, SHRINK PITCH		15.6 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		3 V						7.2 mm	209
DS0026CMA	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	MOS							1	SMALL OUTLINE					1.27 mm	70 Cel			0 Cel		0	DUAL			R-PDSO-G8		20 V	1.753 mm	3.9 mm			10 V						4.9 mm	DS00
SN65LVEL11DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3	+-3.3		0	SMALL OUTLINE	SOP8,.25	.35 ns		Clock Drivers	1.27 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		3 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e4	30	260	4.9 mm	65LVEL
CDC351IDBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	30	260	8.2 mm	351
SNCDC2351DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA	MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
V62/13603-01XE-T	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4 ns	12 Amp		.65 mm	125 Cel		.17 ns	-55 Cel	NICKEL PALLADIUM GOLD	5	DUAL		200 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm			2.3 V			e4	30	260	7.8 mm	CDCV
5962-9676101Q2A	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	1	BICMOS	MIL-PRF-38535 Class Q			5	5		0	CHIP CARRIER	LCC20,.35SQ	7 ns	48 Amp	Clock Drivers	1.27 mm	125 Cel		.8 ns	-55 Cel		8	QUAD			S-CQCC-N20		5.5 V			Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED		CDC
CDC328ADRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CGS64C2525M	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS				3.3			0	SMALL OUTLINE		12.5 ns			1.27 mm	85 Cel		.6 ns	-40 Cel		8	DUAL			R-PDSO-G14		6 V	1.753 mm	3.9 mm			2 V						8.6235 mm	CMOS
CDC339DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	339
CDC351DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDC351IDBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
LMH2180SD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	STANDARD	2					2.7			0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel	TIN LEAD	2	DUAL		75 MHz	S-XDSO-N8	1	5 V	.8 mm	3 mm	Not Qualified		2.4 V			e0	40	260	3 mm	2180
CDC2351DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	15.4 mm	2351
CDC351DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.8 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	8.2 mm	351
54AC11208J	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	10.8 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	125 Cel	3-STATE	1 ns	-55 Cel		4	DUAL	ENABLE LOW		R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	.16 mA			NOT SPECIFIED	NOT SPECIFIED	24.195 mm	AC
CDC1104RVKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	12	QCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1				TR	5	3.8/5.5		0	CHIP CARRIER	LCC12(UNSPEC)		8 Amp	Clock Drivers		85 Cel		10000 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	QUAD		.0001 MHz	S-XQCC-N12	2	5.5 V		3 mm	Not Qualified		3.8 V			e4	NOT SPECIFIED	260	3 mm	CDC
SNCDC305N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL				5		50 pF	4	IN-LINE					2.54 mm	70 Cel		1.5 ns	0 Cel		4	DUAL		80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V	70 mA	CENTER PIN VCC AND GND				19.305 mm	AS
74AC11208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	10.1 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	.08 mA			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
LMH2191TME/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.5	3.5	33 pF	0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,16	10.5 ns	2 Amp	Clock Drivers	.4 mm	85 Cel		3.1 ns	-40 Cel	TIN SILVER COPPER	2	BOTTOM		52 MHz	R-PBGA-B8	1	5.5 V	.675 mm	1.063 mm	Not Qualified		2.5 V			e1	30	260	1.61 mm	2191
SN74AS303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5	5	50 pF	2	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	70 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SNCDC340DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	8	SMALL OUTLINE		4.7 ns			1.27 mm	70 Cel		.6 ns	0 Cel		0	DUAL			R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1.1NS				12.8 mm	ABT
CDC329ADG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA		e4	30	260	9.9 mm	329
CDCP1803RGERG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
SNCDC330DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	3	BICMOS				5		50 pF	0	SMALL OUTLINE		10.5 ns			1.27 mm	70 Cel	3-STATE	.5 ns	0 Cel		4	DUAL		100 MHz	R-PDSO-G24		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	40 mA	TWO BANKS WITH 3 BUFFERED O/PS & ONE BANK WITH 4 DIVIDED BY TWO O/PS; MAX PART TO PART SKEW = 1NS				15.4 mm	ABT
CDC351IDB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	30	260	8.2 mm	351
CDC2351DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	15.4 mm	2351
SNCDC351DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA	MAX PART TO PART SKEW = 1NS				15.4 mm	ABT
SNJ54CDC341J	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1	BICMOS	MIL-PRF-38535			5			0	IN-LINE		7 ns			2.54 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V						24.195 mm	CDC
CDC351DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	30	260	15.4 mm	351
SNCDC112FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL				3.3			0	CHIP CARRIER		.635 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD			S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified		3 V	80 mA	STROBED OUTPUT; CONTROL INPUT IS LVTTL COMPATIBLE; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
SN54CDC341J	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1	BICMOS				5	5		0	IN-LINE	DIP20,.3	7 ns	48 Amp	Clock Drivers	2.54 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	24.195 mm	CDC
CDC319DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	400 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Driver	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified		3.135 V	.5 mA		e4	30	260	10.2 mm	319
SNCDC111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL				3.3			0	CHIP CARRIER		.6 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD			S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified		3 V	80 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
74AC11208N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	10.1 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	.08 mA			NOT SPECIFIED	NOT SPECIFIED	24.325 mm	AC
SNCDC329DLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5			0	SMALL OUTLINE		6.6 ns			1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V						9.9 mm	CDC
SN65EPT22D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	50 mA		e4	30	260	4.9 mm	65EL
LMH2190TMX-38/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1					3.5	3.5		0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	11 ns		Clock Drivers	.4 mm	85 Cel		8.5 ns	-40 Cel	TIN SILVER COPPER	4	BOTTOM			S-PBGA-B16	1	5.5 V	.675 mm	1.61 mm	Not Qualified		2.5 V			e1	30	260	1.61 mm	2190

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.