16 Clock Drivers & Buffers 1,729

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC391D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5		2	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	303
SNCDC305DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5		50 pF	4	SMALL OUTLINE					1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA	CENTER PIN VCC AND GND				9.9 mm	AS
CDC328DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5			0	SMALL OUTLINE, SHRINK PITCH		7 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V						6.2 mm
SN74AS304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5	50 pF	0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SNCDC392D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SN74AS303DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5		50 pF	2	SMALL OUTLINE		9 ns			1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA					9.9 mm	AS
SNCDC328DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5.4 ns			1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SNCDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SNCDC328DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.4 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC328ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel		6	DUAL	100 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
CDC329ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	POLARITY CONTROL SELECTS TRUE OR COMPLEMENTARY OUTPUTS	e4	30	260	9.9 mm	329
SNCDC392DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC328ADRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
SNCDC305N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5		50 pF	4	IN-LINE					2.54 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	70 mA	CENTER PIN VCC AND GND				19.305 mm	AS
SN74AS303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5	50 pF	2	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
CDC329ADG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA		e4	30	260	9.9 mm	329
SNCDC329DLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5			0	SMALL OUTLINE		6.6 ns			1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V						9.9 mm	CDC
CDC392DBLE	Texas Instruments		INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS		5	5			SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		32 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel			DUAL		R-PDSO-G16					Not Qualified
LMH2190TMX-38/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1			3.5	3.5		0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	11 ns		Clock Drivers	.4 mm	85 Cel		8.5 ns	-40 Cel	TIN SILVER COPPER	4	BOTTOM		S-PBGA-B16	1	5.5 V	.675 mm	1.61 mm	Not Qualified	2.5 V			e1	30	260	1.61 mm	2190
SN74ABT328DR	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES					5	5			SMALL OUTLINE	SOP16,.25		64 Amp	Clock Drivers	1.27 mm	70 Cel			0 Cel			DUAL		R-PDSO-G16					Not Qualified
SNCDC303DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5		50 pF	2	SMALL OUTLINE					1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA	FMAX @ CL=30PF				9.9 mm	AS
SNCDC328D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5.4 ns			1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC304DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5		0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	304
SNCDC391DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC305-1N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1			5	5		4	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	305
SNCDC328ADB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.65 mm	85 Cel		1.1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	32 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
SN74ABT329DR	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES					5	5			SMALL OUTLINE	SOP16,.15			Clock Drivers	1.27 mm	70 Cel			0 Cel			DUAL		R-PDSO-G16					Not Qualified
SN74120J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL		5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL		R-XDIP-T16					Not Qualified
SNCDC329AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5.9 ns			1.27 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
DS3245J	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1			5			0	IN-LINE					2.54 mm	75 Cel			0 Cel		4	DUAL		R-GDIP-T16		5.25 V	5.08 mm	7.62 mm		4.75 V		LG_MAX				19.94 mm	3245
DS3245N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1			5			0	IN-LINE					2.54 mm	75 Cel			0 Cel		4	DUAL		R-PDIP-T16		5.25 V	5.08 mm	7.62 mm		4.75 V						21.755 mm	3245
CDC329ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5.9 ns		Clock Drivers	.65 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	329
SNCDC329ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.9 ns			.65 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	40 mA					6.2 mm	ABT
SNCDC329ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5.9 ns			1.27 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC328ADB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel		6	DUAL	100 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
CDC303DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5		2	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	303
SN54AS305J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL		5	5			IN-LINE	DIP16,.3		48 Amp	Clock Drivers	2.54 mm	150 Cel			-55 Cel			DUAL		R-XDIP-T16					Not Qualified
SNCDC392DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SN74120NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL		5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL		R-PDIP-T16					Not Qualified
SN74120NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL		5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL		R-PDIP-T16
SNCDC303N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5		50 pF	2	IN-LINE					2.54 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	70 mA	FMAX @ CL=30PF				19.305 mm	AS
CDC329DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE	SOP16,.25	6.6 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	329
CDC328ADBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL	100 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	NOT SPECIFIED	260	6.2 mm	328
CDC329DLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5			0	SMALL OUTLINE		6.6 ns			1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V						9.9 mm	CDC
SNCDC328DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.4 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC305DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5		4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	305

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.