16 Clock Drivers & Buffers 1,729

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDC392D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	6.5 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	392
SN74AS304DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5	50 pF	0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SNCDC329DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5			0	SMALL OUTLINE		6.6 ns			1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V						9.9 mm	CDC
SNCDC328AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SNCDC304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5		50 pF	0	IN-LINE					2.54 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	75 mA	CENTER PIN VCC AND GND				19.305 mm	AS
SN74AS305N3	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5			4	IN-LINE		9 ns			2.54 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V						19.305 mm	AS
LMH2190TMX-38	Texas Instruments	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2				3.5			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.4 mm	85 Cel			-20 Cel	TIN LEAD	4	BOTTOM		S-PBGA-B16		5.5 V	.675 mm	1.615 mm	Not Qualified	2.5 V			e0			1.615 mm	2190
SN54120W	Texas Instruments		MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC	YES			TTL			5	5			FLATPACK	FL16,.3			Clock Drivers	1.27 mm	125 Cel			-55 Cel			DUAL		R-XDFP-F16					Not Qualified
CDC328ADBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	6.2 mm	328
CDC305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5		4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	305
CDC304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5	5		0	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	304
SN74120J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL			5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL		R-XDIP-T16
SN74ABT328D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES						5	5			SMALL OUTLINE	SOP16,.25		64 Amp	Clock Drivers	1.27 mm	70 Cel			0 Cel			DUAL		R-PDSO-G16					Not Qualified
CDC328DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	7 ns	64 Amp	Clock Drivers	.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
CDC328AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
SNCDC305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	4	SMALL OUTLINE					1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA	CENTER PIN VCC AND GND				9.9 mm	AS
CDC328ADG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDC328D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	7 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	328
LMH2190TM-38	Texas Instruments	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2				3.5			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.4 mm	85 Cel			-20 Cel	TIN LEAD	4	BOTTOM		S-PBGA-B16		5.5 V	.675 mm	1.615 mm	Not Qualified	2.5 V			e0			1.615 mm	2190
CDC392DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	6.5 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	392
CDC328DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	7 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	328
SN74AS303N3	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5			2	IN-LINE		9 ns			2.54 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V						19.305 mm	AS
SNC54120J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL	MIL-STD-883 Class B (Modified)		5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	125 Cel			-55 Cel			DUAL		R-XDIP-T16					Not Qualified
SNCDC304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	75 mA	CENTER PIN VCC AND GND				9.9 mm	AS
CDC303DRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				5			2	SMALL OUTLINE		9 ns			1.27 mm	70 Cel		2 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V			e4			9.9 mm	303
SN74AS304N3	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5			0	IN-LINE		9 ns			2.54 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V						19.305 mm	AS
SN74ABT329D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES						5	5			SMALL OUTLINE	SOP16,.15			Clock Drivers	1.27 mm	70 Cel			0 Cel			DUAL		R-PDSO-G16					Not Qualified
SNCDC303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	2	SMALL OUTLINE					1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA	FMAX @ CL=30PF				9.9 mm	AS
CDC304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5		0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	304
SN74AS304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5	5	50 pF	0	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns	0 Cel		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AS
CDC305N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5	5		4	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1.5 ns	0 Cel		4	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	305
CDC329D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	6.6 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	329
SNCDC391DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
SN74120N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL			5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL		R-PDIP-T16
SNCDC391DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SN54AS303J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL			5	5			IN-LINE	DIP16,.3		48 Amp	Clock Drivers	2.54 mm	125 Cel			-55 Cel			DUAL		R-XDIP-T16					Not Qualified
SN74AS303N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5	5	50 pF	2	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		2 ns	0 Cel		6	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	70 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AS
SNCDC392DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
SN74AS305N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL			5	5	50 pF	4	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns	0 Cel		4	DUAL	100 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	55 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AS
SN74AS305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5	50 pF	4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		4	DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	55 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74AS305DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5	50 pF	4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		4	DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	55 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SNCDC328ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel		1 ns	-40 Cel		6	DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDCVF25081DR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	25 pF	0	SMALL OUTLINE	SOP16,.25	6 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	200 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30	260	9.9 mm	25081
CDCVF25081DG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE	SOP16,.25	6 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL	200 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	9.9 mm	25081
CDCVF25081PWR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	6 ns	12 Amp	Clock Driver	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	200 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	25081
CDCVF25081PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	6 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	200 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	25081
CDCVF25084PWR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	15 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	180 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	25084
CDCM1802RGTT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	2.6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD	800 MHz	S-PQCC-N16	2	3.6 V	1 mm	3 mm	Not Qualified	3 V			e4	30	260	3 mm	1802

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.