20 Clock Drivers & Buffers 1,010

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNJ54CDC341WR	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	FLAT	20	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	STANDARD	1	BICMOS	MIL-PRF-38535			5			0	FLATPACK		7 ns			1.27 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Not Qualified		4.5 V						13.09 mm	CDC
SNCDC208-7DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
54ACT11208FK	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	2	CMOS		4		5	5	50 pF	0	CHIP CARRIER	LCC20,.35SQ	12.1 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	125 Cel	3-STATE	1 ns	-55 Cel		4	QUAD	ENABLE LOW		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	ACT
CDC341DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SOP20,.3	4.9 ns	48 Amp	Clock Drivers	.65 mm	70 Cel		.6 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	341
CDC208DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4		5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	208
SNCDC339DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
CDC337DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	30	260	12.825 mm	337
SNCDC208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
CDC208NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
SN54CDC341FKR	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	1	BICMOS				5			0	CHIP CARRIER		7 ns			1.27 mm	125 Cel		.8 ns	-55 Cel		8	QUAD		33 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified		4.5 V						8.89 mm	CDC
CDC209DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5			0	SMALL OUTLINE, SHRINK PITCH		15.6 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		3 V						7.2 mm	209
5962-9676101Q2A	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	1	BICMOS	MIL-PRF-38535 Class Q			5	5		0	CHIP CARRIER	LCC20,.35SQ	7 ns	48 Amp	Clock Drivers	1.27 mm	125 Cel		.8 ns	-55 Cel		8	QUAD			S-CQCC-N20		5.5 V			Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED		CDC
CDC339DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	339
CDC338DW	Texas Instruments		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS				5	5			SMALL OUTLINE	SOP20,.4		48 Amp	Clock Drivers	1.27 mm	85 Cel			-40 Cel			DUAL			R-PDSO-G20					Not Qualified
54AC11208J	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	10.8 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	125 Cel	3-STATE	1 ns	-55 Cel		4	DUAL	ENABLE LOW		R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	.16 mA			NOT SPECIFIED	NOT SPECIFIED	24.195 mm	AC
74AC11208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	10.1 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	.08 mA			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
SNCDC340DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	8	SMALL OUTLINE		4.7 ns			1.27 mm	70 Cel		.6 ns	0 Cel		0	DUAL			R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1.1NS				12.8 mm	ABT
SNJ54CDC341J	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1	BICMOS	MIL-PRF-38535			5			0	IN-LINE		7 ns			2.54 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V						24.195 mm	CDC
SN54CDC341J	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	STANDARD	1	BICMOS				5	5		0	IN-LINE	DIP20,.3	7 ns	48 Amp	Clock Drivers	2.54 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	24.195 mm	CDC
74AC11208N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	10.1 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	.08 mA			NOT SPECIFIED	NOT SPECIFIED	24.325 mm	AC
SNCDC208DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
SNCDC208-7DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
CDC341DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V	33 mA		e4	30	260	12.825 mm	341
CDC339NSR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.3	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.6 mm	CDC
CDC3S04YFFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	20	VFBGA	RECTANGULAR	UNSPECIFIED	YES	STANDARD	1				TR	1.8	1.8	10 pF	0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA20,4X5,16	3 ns	3 Amp	Clock Drivers	.4 mm	85 Cel		.05 ns	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	4	BOTTOM		52 MHz	R-XBGA-B20	1	1.95 V	.625 mm	1.905 mm	Not Qualified		1.65 V			e1	NOT SPECIFIED	260	2.305 mm	CDC
SNCDC208-7DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDC340DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	4.8 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL		40 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	340
CDC339DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA		e4	30	260	7.2 mm	CDC
CDC208NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
CDC5806PWR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25				.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL			R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	6.5 mm	5806
CDC341DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V	33 mA		e4	NOT SPECIFIED	260	12.825 mm	341
SN74ABT337N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	BICMOS				5	5		0	IN-LINE	DIP20,.3		48 Amp	Clock Drivers	2.54 mm	70 Cel	3-STATE		0 Cel		8	DUAL		80 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ABT
SNCDC208N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS				5		50 pF	0	IN-LINE		11.5 ns			2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				24.325 mm	ACT
CDC208NSR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.6 mm	208
SNCDC208-7DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDC339NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.3	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V						12.6 mm	CDC
SNCDC341DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		4.9 ns			1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL			R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1NS				12.8 mm	ABT
SN54AS305FK	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES			TTL				5	5			CHIP CARRIER	LCC20,.35SQ		48 Amp	Clock Drivers	1.27 mm	150 Cel			-55 Cel			QUAD			S-XQCC-N20					Not Qualified
SN54CDC341WR	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	STANDARD	1	BICMOS				5			0	FLATPACK		7 ns			1.27 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Not Qualified		4.5 V						13.09 mm	CDC
CDC208DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	5	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	208
CDC340DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.8 ns	48 Amp	Clock Drivers	.65 mm	70 Cel		.6 ns	0 Cel		8	DUAL			R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	340
SN54CDC341W	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	STANDARD	1	BICMOS				5	5		0	FLATPACK	FL20,.3	7 ns	48 Amp	Clock Drivers	1.27 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	13.09 mm	CDC
CDC209-7DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	15.6 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.52 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	209
CDC209N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	15.6 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	24.325 mm	209
74AC11208DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	10.1 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	.08 mA			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
SNCDC209-7N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS				5		50 pF	0	IN-LINE		10.1 ns			2.54 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				24.325 mm	AC
CDC209-7N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	15.6 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	24.325 mm	CDC
5962-9676101QSX	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	STANDARD	1	BICMOS				5			0	FLATPACK		7 ns				125 Cel		1.9 ns	-55 Cel		8	DUAL			R-GDFP-F20		5.5 V			Not Qualified		4.5 V							CDC

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.