20 Clock Drivers & Buffers 1,010

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC340DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS			5		50 pF	8	SMALL OUTLINE		4.7 ns			1.27 mm	70 Cel		.6 ns	0 Cel		0	DUAL			R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1.1NS				12.8 mm	ABT
CDC339DBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS		TUBE	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA		e4	NOT SPECIFIED	260	7.2 mm	CDC
74ACT11208N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2		CMOS	4		5	5	50 pF	0	IN-LINE	DIP20,.3	11.5 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ACT
SNCDC339DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
CDC339DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	CDC
CDC337NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS			5	5		0	SMALL OUTLINE	SOP20,.3	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V						12.6 mm	337
54AC11208FK	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	2		CMOS	4		5	3.3/5	50 pF	0	CHIP CARRIER	LCC20,.35SQ	10.8 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	125 Cel	3-STATE	1 ns	-55 Cel		4	QUAD	ENABLE LOW		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	3 V	.16 mA			NOT SPECIFIED	NOT SPECIFIED	8.89 mm	AC
SNCDC337DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
LMK00725PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				TUBE	3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.37 ns		Clock Drivers	.65 mm	85 Cel		.035 ns	-40 Cel	MATTE TIN	10	DUAL		650 MHz	R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V	60 mA		e3	30	260	6.5 mm	00725
CDCLVC1110PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		TUBE	2.5	3.3		0	SMALL OUTLINE	TSSOP20,.25	2.6 ns	12 Amp	Clock Driver	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G20	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	6.5 mm	CDC
LMK00725PWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				TR	3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.37 ns		Clock Drivers	.65 mm	85 Cel		.035 ns	-40 Cel	MATTE TIN	10	DUAL		650 MHz	R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V	60 mA		e3	30	260	6.5 mm	00725
CDCLVC1110PWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		TR	2.5	3.3		0	SMALL OUTLINE	TSSOP20,.25	2.6 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G20	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	6.5 mm	CDC
AD805BN	Analog Devices	CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1					5			1	IN-LINE					2.54 mm	85 Cel			-40 Cel	TIN LEAD	1	DUAL			R-PDIP-T20			5.33 mm	7.62 mm	Not Qualified					e0			25.2 mm	805
MAX9310AEUP+T	Analog Devices	CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		BIPOLAR			3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.025 ns	-40 Cel	Matte Tin (Sn) - annealed	5	DUAL		1000 MHz	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		3 V			e3	30	260	6.5 mm
MAX9310EUP+	Analog Devices	CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		BIPOLAR			2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.025 ns	-40 Cel	Matte Tin (Sn) - annealed	5	DUAL		1000 MHz	R-PDSO-G20	1	2.625 V	1.1 mm	4.4 mm	Not Qualified		2.375 V			e3	30	260	6.5 mm
MAX9310AEUP+	Analog Devices	CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		BIPOLAR			3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.025 ns	-40 Cel	Matte Tin (Sn) - annealed	5	DUAL		1000 MHz	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		3 V			e3	30	260	6.5 mm
MAX9310EUP+T	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		BIPOLAR			2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.6 ns			.65 mm	85 Cel		.025 ns	-40 Cel	Matte Tin (Sn) - annealed	5	DUAL		1000 MHz	R-PDSO-G20		2.625 V	1.1 mm	4.4 mm	Not Qualified		2.375 V			e3			6.5 mm
MAX9324ETP+	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		BICMOS			3.3			0	CHIP CARRIER, VERY THIN PROFILE		.6 ns			.5 mm	85 Cel		.03 ns	-40 Cel	Matte Tin (Sn) - annealed	4	QUAD		650 MHz	S-XQCC-N20	1	3.6 V	.8 mm	4 mm	Not Qualified		3 V			e3	30	260	4 mm
MAX9323ETP+	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	MUX	1		BICMOS			3.3			0	CHIP CARRIER, VERY THIN PROFILE		.6 ns			.5 mm	85 Cel		.03 ns	-40 Cel	Matte Tin (Sn) - annealed	4	QUAD		1500 MHz	S-XQCC-N20	1	3.6 V	.8 mm	4 mm	Not Qualified		3 V			e3	30	260	4 mm
NB3N853501EDTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				TR	3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2 ns		Clock Drivers	.65 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL			R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V			e4	30	260	6.5 mm	3N
NB3N853501EDTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2 ns		Clock Drivers	.65 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL			R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V			e4	30	260	6.5 mm	3N
LV5609V	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	20	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS			3.3			0	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		200 ns			.65 mm	80 Cel			-20 Cel		4	DUAL			R-PDSO-G20		5.5 V	1.5 mm	4.4 mm			2 V						6.5 mm	5609
SC100LVEL14DWR2G	Onsemi		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				ECL100K			3.3	+-3.3			SMALL OUTLINE	SOP20,.4			Clock Drivers	1.27 mm	85 Cel			-40 Cel	TIN		DUAL			R-PDSO-G20					Not Qualified					e3		260
SC100LVEL14DWR2	Onsemi		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				ECL100K			3.3	+-3.3			SMALL OUTLINE	SOP20,.4			Clock Drivers	1.27 mm	85 Cel			-40 Cel	TIN LEAD		DUAL			R-PDSO-G20	1				Not Qualified					e0		235
MC100EL39DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	1000000000 Hz	ECL			5	+-5		0	SMALL OUTLINE	SOP20,.4	1.2 ns		Prescaler/Multivibrators	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	4	DUAL		1000 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V	61 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	12.8 mm	100EL
MC100EL13DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL			5	-4.5		0	SMALL OUTLINE	SOP20,.4	.62 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN	3	DUAL			R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
NB3L8533DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					2.5	2.5/3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.55 ns		Clock Drivers	.65 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL			R-PDSO-G20	1	3.63 V	1.2 mm	4.4 mm	Not Qualified		2.375 V			e4	30	260	6.5 mm	NB3
MC100LVEL38DWR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.3		0	SMALL OUTLINE	SOP20,.25	1.05 ns	100 Amp	Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN LEAD	4	DUAL		1000 MHz	R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	12.8 mm	100LVEL
MC10EP139DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN	4	DUAL			R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	10E
MC100LVEL37DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			3.3	-3.3		0	SMALL OUTLINE	SOP20,.4	.94 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Tin/Lead (Sn80Pb20)	4	DUAL			R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE= -3V TO -3.8V	e0	30	235	12.8 mm	100LVEL
MC10EP139DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL			R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	10E
MC100EP139DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		TR	3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL			R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	100E
NB3L853141DTR2G	Onsemi	LOW SKEW CLOCK DRIVER		GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				TR	2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.5 ns			.65 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		700 MHz	R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm			2.375 V	55 mA		e4	30	260	6.5 mm	NB3
MC100EL38DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			5	+-5		0	SMALL OUTLINE	SOP20,.4	1.05 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	MATTE TIN	4	DUAL		1000 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	12.8 mm	100EL
MC100EL13DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL			5	-4.5		0	SMALL OUTLINE	SOP20,.4	.62 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	3	DUAL			R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC100EL14DWR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			5	-4.5		0	SMALL OUTLINE	SOP20,.4	.83 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	5	DUAL			R-PDSO-G20		5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	12.8 mm	100EL
MC100LVEP14DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		2000 MHz	R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	6.5 mm	100LVE
MC100LVEL39DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	1000000000 Hz	ECL			3.3	+-3.3		0	SMALL OUTLINE	SOP20,.4	1.2 ns		Prescaler/Multivibrators	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	4	DUAL		1000 MHz	R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V	61 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	12.8 mm	100LVEL
MC100EP139DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL		1000 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	40	260	6.5 mm	100E
MC100LVEL13DWR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL			3.3	-3.3		0	SMALL OUTLINE	SOP20,.4	.62 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN LEAD	3	DUAL			R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e0		235	12.8 mm	100LVEL
MC10EP139DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN LEAD	4	DUAL			R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	12.8 mm	10E
MC10EP139DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN	4	DUAL			R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	10E
MC100LVEL37DWR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			3.3	-3.3		0	SMALL OUTLINE	SOP20,.4	.94 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	4	DUAL			R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE= -3V TO -3.8V	e0		235	12.8 mm	100LVEL
MC10EP139MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	4	QUAD			S-XQCC-N20		5.5 V	1 mm	4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3			4 mm	10E
MC100LVEL13DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL			3.3	-3.3		0	SMALL OUTLINE	SOP20,.4	.62 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN LEAD	3	DUAL			R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e0		235	12.8 mm	100LVEL
MC100EP139DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.1 ns	-40 Cel	TIN	4	DUAL		1500 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	100E
MC100LVEL14DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			3.3	-3.3		0	SMALL OUTLINE	SOP20,.4	.83 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	5	DUAL			R-PDSO-G20	1	3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	12.8 mm	100LVEL
MC10H644FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			5	5		0	CHIP CARRIER	LDCC28,.5SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD		135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified		4.75 V			e0		235	8.965 mm	10H

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.