28 Clock Drivers & Buffers 510

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
9DB433AFLIFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3			Clock Drivers	.65 mm	85 Cel	3-STATE	.06 ns	-40 Cel	Matte Tin (Sn) - annealed	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
8SLVD1208NBGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		TRAY	2.5		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.38 ns			.5 mm	85 Cel		.04 ns	-40 Cel	Matte Tin (Sn)	16	QUAD		S-XQCC-N28	1	2.625 V	.8 mm	5 mm		2.375 V			e3	NOT SPECIFIED	260	5 mm	8SLVD
IDT74388915T133J	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS		3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN LEAD	7	QUAD	133 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e0			11.5062 mm	FCT
8SLVP1208ANBGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	BGA52,6X10,25	.41 ns		Clock Drivers	.5 mm	85 Cel		.064 ns	-40 Cel	MATTE TIN	14	QUAD		S-XQCC-N28	1	2.625 V	.8 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V SUPPLY	e3		260	5 mm	8SLVP
9DB401CGT	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	TIN LEAD	4	DUAL		R-PDSO-G28		3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e0			9.7 mm	9DB
9DB633AGLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	6	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3	30	260	9.7 mm	9DB
9DB633AFLIFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25			Clock Drivers	.65 mm	85 Cel	3-STATE	.05 ns	-40 Cel	Matte Tin (Sn) - annealed	6	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
9DB403DGLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TUBE	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3	30	260	9.7 mm	9DB
9DB403DFLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TUBE	3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
9DB633AFILF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25			Clock Drivers	.65 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	6	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
9DB433AFILF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3			Clock Drivers	.65 mm	85 Cel	3-STATE	.06 ns	-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
8SLVP2104ANBGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	2			2.5	2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.27 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	8	QUAD		S-XQCC-N28	1	2.625 V	.8 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V SUPPLY	e3		260	5 mm	8SLVP
9DB633AFILFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3		0	SMALL OUTLINE, SHRINK PITCH					.65 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	6	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3		260	10.2 mm	9DB
9DB423BGLF	Renesas Electronics	PLL BASED CLOCK DRIVER		GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TUBE	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25				.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	TIN	4	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm		3.135 V	200 mA		e3		260	9.7 mm	9DB
IDT74388915T150J	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	MUX	1	CMOS		3.3		1	CHIP CARRIER					1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN LEAD	7	QUAD	150 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V			e0			11.5062 mm	FCT
9DB433AFLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3			Clock Drivers	.65 mm	70 Cel	3-STATE	.06 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
9DB436AGILF	Renesas Electronics	PLL BASED CLOCK DRIVER		GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TUBE	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25				.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.06 ns	-40 Cel	TIN	8	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm		3.135 V	103 mA		e3		260	9.7 mm	9DB
9DB401CFLFT	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
9DB401CFLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
5T9306NLGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5	0	CHIP CARRIER, VERY THIN PROFILE	LCC28,.24SQ,25	1.75 ns		Clock Driver	.65 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	6	QUAD	1000 MHz	S-PQCC-N28	1	2.7 V	1 mm	6 mm	Not Qualified	2.3 V			e3	30	260	6 mm	5T
5T9306NLGI8	Renesas Electronics		INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES					2.5	2.5		CHIP CARRIER	LCC28,.24SQ,25			Clock Drivers	.635 mm	85 Cel			-40 Cel	MATTE TIN		QUAD		S-PQCC-N28	1				Not Qualified				e3	30	260
5T905PGGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		2.5	1.5/2.5,2.5	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	5	DUAL	250 MHz	R-PDSO-G28	1	2.6 V	1.2 mm	4.4 mm	Not Qualified	2.4 V			e3	30	260	9.7 mm	5T
5T90533PGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		2.5		0	SMALL OUTLINE		2.5 ns				85 Cel		.025 ns	-40 Cel		5	DUAL		R-PDSO-G28		2.6 V				2.4 V				NOT SPECIFIED	NOT SPECIFIED		5T
5T9050PGGI	Renesas Electronics	LOW SKEW CLOCK DRIVER		GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	1.8 ns	12 Amp		.65 mm	85 Cel		.025 ns	-40 Cel	TIN	5	DUAL		R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm		2.3 V	100 mA		e3		260	9.7 mm	5T
LCK4310GF-DB	Broadcom	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	+-2.5/+-3.3	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.04 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28			4.572 mm	11.506 mm	Not Qualified			ALSO OPERATES WITH 3.3V SUPPLY	e0	30	225	11.506 mm	4000/14000/40000
LCK4310GF-DT	Broadcom	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	+-2.5/+-3.3	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.04 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28			4.572 mm	11.506 mm	Not Qualified			ALSO OPERATES WITH 3.3V SUPPLY	e0	30	225	11.506 mm	4000/14000/40000
EQ6600-L3	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		5	3.3/5	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	133 MHz	S-PQCC-J28		5.25 V	4.6 mm	11.51 mm	Not Qualified	3 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600
EQ6600-L1	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		5	3.3/5	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.6 mm	11.51 mm	Not Qualified	3 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600
EQ6600	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		5	5	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	80 MHz	S-PQCC-J28		5.25 V	4.6 mm	11.51 mm	Not Qualified	4.75 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600
EQ6600-L7	Broadcom	PLL BASED CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ		16 Amp	Clock Drivers	1.27 mm	70 Cel		.25 ns	0 Cel	TIN LEAD	10	QUAD	170 MHz	S-PQCC-J28		3.6 V	4.6 mm	11.51 mm	Not Qualified	3 V		O/P FREQUENCY RATIOS ARE 0.5F/1.0F; WITH DEDICATED FEEDBACK OUTPUT; MEETS PENTIUM SKEW REQUIREMENTS	e0			11.51 mm	6600

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.