28 Clock Drivers & Buffers 510

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CY28353OXC-2	Infineon Technologies		COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				2.5	2.5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel	MATTE TIN		DUAL		R-PDSO-G28	3				Not Qualified				e3	20	260
PI90LV211QEX	Diodes Incorporated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3		0	SMALL OUTLINE, SHRINK PITCH		3.4 ns			.635 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	6	DUAL		R-PDSO-G28	1		1.75 mm	3.9116 mm	Not Qualified				e3			9.9 mm	90LV
PI6C20400LEX	Diodes Incorporated	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1		3.3	3.3	4	SMALL OUTLINE	TSSOP28,.25		1 Amp	Clock Drivers	.65 mm	70 Cel		.05 ns	0 Cel		4	DUAL		R-PDSO-G28		3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V						9.7 mm	6C
PI6C20400LE	Diodes Incorporated	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		1 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		PLL BYPASS OPERATION AVAILABLE	e3			9.7 mm	6C
PI6C49S1504LIEX	Diodes Incorporated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel	3-STATE		-40 Cel		8	DUAL	1500 MHz	R-PDSO-G28		3.465 V	1.2 mm	4.4 mm		2.375 V						9.7 mm	6C
PI6C20400BHE	Diodes Incorporated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	6.5 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3			10.2 mm	6C
PI6C20400ALE	Diodes Incorporated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	.25 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3			9.7 mm	TTL
PI6C3Q993-5	Diodes Incorporated		COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			DUAL		R-PDSO-G28					Not Qualified
PI6C20400AHEX	Diodes Incorporated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	.25 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3			10.2 mm	TTL
PI6C20400AHE	Diodes Incorporated	CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	.25 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3			10.2 mm	TTL
PI6C49S1504LIE	Diodes Incorporated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel	3-STATE		-40 Cel		8	DUAL	1500 MHz	R-PDSO-G28		3.465 V	1.2 mm	4.4 mm		2.375 V						9.7 mm	6C
PI6C3Q993	Diodes Incorporated		COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			DUAL		R-PDSO-G28					Not Qualified
PI6C20400HEX	Diodes Incorporated	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1		3.3	3.3	4	SMALL OUTLINE	SSOP28,.3		1 Amp	Clock Drivers	.65 mm	70 Cel		.05 ns	0 Cel		4	DUAL		R-PDSO-G28		3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V						9.7 mm	6C
PI6C20400BLE	Diodes Incorporated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	6.5 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3			9.7 mm	6C
PI6C20400HE	Diodes Incorporated	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3,20		1 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V		PLL BYPASS OPERATION AVAILABLE	e3			10.2 mm	6C
PI6C3Q993-5I	Diodes Incorporated		INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel			DUAL		R-PDSO-G28					Not Qualified
PI6C20400BLEX	Diodes Incorporated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	6.5 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3			9.7 mm	6C
PI6C3Q993-I	Diodes Incorporated		INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel			DUAL		R-PDSO-G28					Not Qualified
PI6C20400ALEX	Diodes Incorporated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	.25 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3			9.7 mm	TTL
PI6C20400BHEX	Diodes Incorporated	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	6.5 ns	1 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3			10.2 mm	6C
PI6C3Q993-2	Diodes Incorporated		COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			DUAL		R-PDSO-G28					Not Qualified
DS21610QN/T&R	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	QUAD	8.192 MHz	S-PQCC-J28	1	3.465 V	4.572 mm	11.5062 mm	Not Qualified	3.135 V		ALSO OPERATES AT 5V SUPPLY	e0			11.5062 mm	21610
DS21610QN	Maxim Integrated	PLL BASED CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		3.3		0	CHIP CARRIER		41 ns			1.27 mm	85 Cel			-40 Cel	TIN LEAD	2	QUAD	8.192 MHz	S-PQCC-J28	1	3.465 V	4.57 mm	11.505 mm	Not Qualified	3.135 V		ALSO OPERATES AT 5V SUPPLY	e0		245	11.505 mm	21610
MAX9326EGI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.506 ns			.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9160EUI+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.8 ns	8 Amp	Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	14	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V			e3	30	260	9.7 mm
MAX9325EQI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3	+-2.375/+-3.8	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm	9325
MAX9326ETI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.685 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9160AEUI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.8 ns	8 Amp	Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	14	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V			e0			9.7 mm
MAX9326EQI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3			11.505 mm
MAX9160EUI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.8 ns	8 Amp	Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	14	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V			e3	30	260	9.7 mm
MAX9325EGI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.586 ns			.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm	9325
MAX9160EUI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.8 ns	8 Amp	Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	14	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V			e0			9.7 mm
MAX9160EUI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.8 ns	8 Amp	Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	14	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	3 V			e0			9.7 mm
MAX9325EQI+T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3		0	CHIP CARRIER		.8 ns			1.27 mm	85 Cel		.05 ns	-40 Cel		8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V				11.505 mm	9325
MAX9326EGI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.506 ns			.5 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-XQCC-N28	1	3.8 V	.9 mm	5 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			5 mm
MAX9326EQI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm
MAX9326EQI	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	9	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm
MAX9325EQI+	Maxim Integrated	CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3		0	CHIP CARRIER		.8 ns			1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3	30	260	11.505 mm	9325
MAX9325EQI-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	BIPOLAR	3.3	+-2.375/+-3.8	0	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e0			11.505 mm	9325
MAX9326EQI+	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR	3.3	3.3	0	CHIP CARRIER	LDCC28,.5SQ	.685 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	2.375 V		LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V	e3	30	260	11.505 mm
IDT5T9306NLGI8	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES				2.5	2.5		CHIP CARRIER	LCC28,.24SQ,25			Clock Drivers	.635 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		QUAD		S-PQCC-N28	1				Not Qualified				e3	30	260
IDT5T9306NLGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		2.5	2.5	0	CHIP CARRIER, VERY THIN PROFILE	LCC28,.24SQ,25	1.75 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	Matte Tin (Sn) - annealed	6	QUAD	1000 MHz	S-PQCC-N28	1	2.7 V	1 mm	6 mm	Not Qualified	2.3 V			e3	30	260	6 mm	5T
IDT5993A-7QI8	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		5		0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel		.75 ns	-40 Cel	TIN LEAD	8	DUAL	100 MHz	R-PDSO-G28		5.5 V	1.75 mm	3.9116 mm	Not Qualified	4.5 V			e0			9.9 mm
IDT54FCT388915T55J	Renesas Electronics		MILITARY	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ			Clock Drivers	1.27 mm	125 Cel			-55 Cel	TIN LEAD		QUAD		S-PQCC-J28	1				Not Qualified				e0	20	225
IDT54FCT388915T55PY	Renesas Electronics		MILITARY	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS	3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3			Clock Drivers	.635 mm	125 Cel			-55 Cel	TIN LEAD		DUAL		R-PDSO-G28	1				Not Qualified				e0	20	240
IDT54FCT388915T55L	Renesas Electronics		MILITARY	NO LEAD	28	QCCN	SQUARE	CERAMIC	YES			CMOS	3.3	3.3		CHIP CARRIER	LCC28,.45SQ			Clock Drivers	1.27 mm	125 Cel			-55 Cel	TIN LEAD		QUAD		S-XQCC-N28					Not Qualified				e0
9DS400AFILFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		3.3	3.3	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		125 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.05 ns	-40 Cel	Matte Tin (Sn) - annealed	4	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DS
74FCT388915TEPYG	Renesas Electronics	PLL BASED CLOCK DRIVER		GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER MUX	1	CMOS	3.3		1	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	1.3 ns	32 Amp		.65 mm	70 Cel	3-STATE	.8 ns	0 Cel	TIN	7	DUAL	150 MHz	R-PDSO-G28	1	3.6 V	1.73 mm	5.29 mm		3 V	120 mA		e3		260	10.2 mm	FCT

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.