28 Clock Drivers & Buffers 510

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
8SLVP1208ANBGI/W	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	BGA52,6X10,25	.41 ns		Clock Drivers	.5 mm	85 Cel		.064 ns	-40 Cel	MATTE TIN	14	QUAD		S-XQCC-N28	1	2.625 V	.8 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V SUPPLY	e3		260	5 mm	8SLVP
9DB633AFLF	Renesas Electronics	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	6	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e3	30	260	10.2 mm	9DB
ICS9DB104BGLF	Integrated Device Technology		COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES					3.3	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25			Clock Drivers	.635 mm	70 Cel			0 Cel	MATTE TIN		DUAL		R-PDSO-G28	1				Not Qualified				e3	30	260
IDT5V993A-5QGI	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	85 Cel		.7 ns	-40 Cel	Matte Tin (Sn) - annealed	8	DUAL	85 MHz	R-PDSO-G28	1	3.6 V	1.7272 mm	3.9116 mm	Not Qualified	3 V			e3	30	260	9.906 mm	5V
IDT5V993A-5QGI8	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel		.7 ns	-40 Cel	MATTE TIN	8	DUAL	85 MHz	R-PDSO-G28		3.6 V	1.75 mm	3.9116 mm	Not Qualified	3 V			e3			9.9 mm
LMK1D1208RHDT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.575 ns			.5 mm	105 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD	2000 MHz	S-PQCC-N28	1	1.89 V	1 mm	5 mm		1.71 V	95 mA		e4	30	260	5 mm
MK74CB218RLFTR	Renesas Electronics	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	TR	3.3	2.5/3.3,3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25	6 ns	25 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel	MATTE TIN	16	DUAL	200 MHz	R-PDSO-G28	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V		ALSO REQUIRES 2.375V TO 3.6V OUTPUT SUPPLY	e3	30	260	9.9 mm	CB
DS90LV110TMTC	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	TUBE	3.3	3.3	5 pF	0	SMALL OUTLINE, SHRINK PITCH	TSSOP28,.25	3.6 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.091 ns	-40 Cel	TIN LEAD	10	DUAL		R-PDSO-G28	3	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V	195 mA		e0	20	235	9.7 mm	90LV
DS90LV110TMTC/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	TUBE	3.3	3.3	5 pF	0	SMALL OUTLINE, SHRINK PITCH	TSSOP28,.25	3.6 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.091 ns	-40 Cel	MATTE TIN	10	DUAL		R-PDSO-G28	3	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V	195 mA		e3	30	260	9.7 mm	90LV
DS90LV110TMTCX	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	TSSOP28,.25	3.6 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.091 ns	-40 Cel	TIN LEAD	10	DUAL		R-PDSO-G28	3	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e0	20	235	9.7 mm	90LV
CDC536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		32 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	536
CDC536DBR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e4	30	260	10.2 mm	536
SNCDC536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
SNCDC111FN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3			0	CHIP CARRIER		.6 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD		S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V	80 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
CDC536DB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e4	30	260	10.2 mm	536
SNCDC112FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3			0	CHIP CARRIER		.635 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD		S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V	80 mA	STROBED OUTPUT; CONTROL INPUT IS LVTTL COMPATIBLE; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
CDC319DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	400 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Driver	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	100 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V	.5 mA		e4	30	260	10.2 mm	319
SNCDC111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3			0	CHIP CARRIER		.6 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD		S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V	80 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
CGS2535TVX	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	4	CMOS		3.3	3.3/5	50 pF	0	CHIP CARRIER	LDCC28,.5SQ	5 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	3.6 V	4.57 mm	11.43 mm	Not Qualified	3 V	.235 mA	IOH,VOH,IOL & VOL @ VCC=4.5V	e0		220	11.43 mm	ABT
CGS2535VX	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	4	CMOS		3.3	3.3/5	50 pF	0	CHIP CARRIER	LDCC28,.5SQ	5 ns	24 Amp	Clock Drivers	1.27 mm	70 Cel		.35 ns	0 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	3.6 V	4.57 mm	11.43 mm	Not Qualified	3 V	.235 mA	IOH,VOH,IOL & VOL @ VCC=4.5V	e0		220	11.43 mm	ABT
CDC2536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	NOT SPECIFIED	260	10.2 mm	2536
CDC319DBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V	.5 mA		e4	30	260	10.2 mm	319
SNCDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CDC319DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		10	DUAL	100 MHz	R-PDSO-G28		3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC
SNCDC2536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CDC111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3		0	CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	70 Cel		.05 ns	0 Cel		9	QUAD	500 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	11.505 mm	111
CDC2536DB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	30	260	10.2 mm	2536
CGS2535TV	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	STANDARD	4			3.3			0	CHIP CARRIER		5 ns				85 Cel		.35 ns	-40 Cel		4	QUAD		S-PQCC-N28		3.6 V				3 V		IT ALSO OPERATS AT 5V NOM					2535
SNCDC536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CGS2535V	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	STANDARD	4			3.3			0	CHIP CARRIER		5 ns				70 Cel		.35 ns	0 Cel		4	QUAD		S-PQCC-N28		3.6 V				3 V		IT ALSO OPERATS AT 5V NOM					2535
CDC111FN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	3.3	3.3		0	CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Driver	1.27 mm	70 Cel		.05 ns	0 Cel	NICKEL PALLADIUM GOLD	9	QUAD	500 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V	80 mA		e4	30	260	11.505 mm	111
CDC2536DBR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	30	260	10.2 mm	2536
CDC536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e4	30	260	10.2 mm	536
CDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
CDC2536DBRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	NOT SPECIFIED	260	10.2 mm	2536
SNCDC112FN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3			0	CHIP CARRIER		.635 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		9	QUAD		S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V	80 mA	STROBED OUTPUT; CONTROL INPUT IS LVTTL COMPATIBLE; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
CDC536DBLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2 mm	5.3 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC
CDC111FNRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3			0	CHIP CARRIER		.6 ns			1.27 mm	70 Cel		.05 ns	0 Cel	NICKEL PALLADIUM GOLD	9	QUAD		S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4			11.505 mm	111
CDC536DBRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	10.2 mm	536
CDC2536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
CDC319DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	400 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Driver	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V	.5 mA		e4	NOT SPECIFIED	260	10.2 mm	319
CDC112FN	Texas Instruments		COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES					3.3	3.3			CHIP CARRIER	LDCC28,.5SQ			Clock Drivers	1.27 mm	70 Cel			0 Cel			QUAD		S-PQCC-J28					Not Qualified
CDC2536DBLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2 mm	5.3 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC
CDC536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		32 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	536
CDC319DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	400 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	100 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V	.5 mA		e4	30	260	10.2 mm	319
LMK1D1204PRHDR	Texas Instruments	LOW SKEW CLOCK DRIVER		NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR, 13 INCH	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.575 ns			.5 mm	105 Cel	3-STATE	.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	2000 MHz	S-PQCC-N28	1	1.89 V	1 mm	5 mm		1.71 V	72 mA	ALSO OPERATES AT 2.5 V AND 3.3 V POWER SUPPLY	e4		260	5 mm	LMK
CDCV855PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	NICKEL PALLADIUM GOLD	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	30	260	9.7 mm	855
CDCVF855PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	220 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V	10 mA		e4	NOT SPECIFIED	260	9.7 mm	855

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.