SQUARE Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
NB2304AI5HDTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel			.2 ns	-40 Cel	MATTE TIN	4	DUAL	133.3 MHz	S-PDSO-G8		3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e3			3 mm	2304
NB7L585MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					2.5	2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.02 ns	-40 Cel	MATTE TIN	6	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	7L
NB2304AI1DTR2	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel			.2 ns	-40 Cel	TIN LEAD	4	DUAL	133.3 MHz	S-PDSO-G8		3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e0			3 mm	2304
NB7L572MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					2.5	2.5/3.3	0	CHIP CARRIER	LCC32,.2SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel			.07 ns	-40 Cel	MATTE TIN	2	QUAD	6000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3V	e3	30	260	5 mm	7L
NB2305AI1DT	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	85 Cel			.25 ns	-40 Cel	TIN LEAD	4	DUAL	133.33 MHz	S-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e0		235	4.4 mm	2305
NBSG53AMAHTBG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					2.5		0	GRID ARRAY, THIN PROFILE		.27 ns			1 mm	70 Cel				-40 Cel		1	BOTTOM		S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V		NOT SPECIFIED	NOT SPECIFIED	4 mm	53
PCS3P73Z01BWG-08-CR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1					2.5		0	SMALL OUTLINE, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE			0 Cel		1	DUAL	150 MHz	S-PDSO-N8		2.7 V	.8 mm	2 mm	Not Qualified	2.3 V						2 mm	3P
NBSG53ABAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					2.5	-2.5/-3.3/2.5/3.3	0	GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel				-40 Cel	TIN LEAD	1	BOTTOM		S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	53
NBSG11MA1TBG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	GRID ARRAY, THIN PROFILE	LGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel			.015 ns	-40 Cel	MATTE TIN	2	BOTTOM	10709 MHz	S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3			4 mm	11
NBSG11BAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					2.5		0	GRID ARRAY, LOW PROFILE		.16 ns			1 mm	70 Cel			.015 ns	-40 Cel		2	BOTTOM	10709 MHz	S-PBGA-B16		3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V		NOT SPECIFIED	NOT SPECIFIED	4 mm	11
NB7L585RMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					2.5	2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.225 ns		Clock Drivers	.5 mm	85 Cel			.02 ns	-40 Cel	TIN	6	QUAD	6000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	7L
NBSG14MN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR		.015 ns	-40 Cel	TIN LEAD	4	QUAD	10500 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0		235	3 mm	14
NBSG11MAHTBG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					2.5		0	GRID ARRAY, THIN PROFILE		.16 ns			1 mm	70 Cel			.015 ns	-40 Cel		2	BOTTOM	10709 MHz	S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V		NOT SPECIFIED	NOT SPECIFIED	4 mm	11
NBSG14BAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					2.5		0	GRID ARRAY, LOW PROFILE		.15 ns			1 mm	70 Cel	SERIES-RESISTOR		.015 ns	-40 Cel		4	BOTTOM	10700 MHz	S-PBGA-B16		3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		NOT SPECIFIED	NOT SPECIFIED	4 mm	14
NB6VQ572MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					1.8	1.8/2.5	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	20 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	TIN	2	QUAD		S-XQCC-N32	1	1.89 V	1 mm	5 mm	Not Qualified	1.71 V		IT CAN ALSO OPERATE AT 2.5V SUPPLY	e3	30	260	5 mm	6V
NB7V33MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	10000000000 Hz				1.8	1.8/2.5	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.7 ns		Prescaler/Multivibrators	.5 mm	85 Cel			.05 ns	-40 Cel	NICKEL GOLD PALLADIUM	1	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	1.71 V	115 mA	IT ALSO OPERATES AT 2.5V SUPPLY		30	260	3 mm	7V
M100LVEP111FATWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	+-2.375/+-3.8	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.5 ns		Clock Drivers	.8 mm	85 Cel			.025 ns	-40 Cel	MATTE TIN	10	QUAD		S-PQFP-G32	2	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	7 mm	100LVE
NB7V52MMNTXG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	10000000000 Hz	ECL		TR		1.8/2.5	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.6 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE		-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	10000 MHz	S-PQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	1.71 V				30	260	3 mm	ECL
NBSG11MN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	TIN LEAD	2	QUAD	10500 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	3 mm	11
NB100LVEP224FARG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel			.04 ns	0 Cel	TIN	24	QUAD		S-PQFP-G64	3	3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB2304AI1HDTR2G	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel			.2 ns	-40 Cel	MATTE TIN	4	DUAL	133.3 MHz	S-PDSO-G8		3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e3			3 mm	2304
LV5609LP	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	NO LEAD	24	VQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1		BICMOS			3.3		0	CHIP CARRIER, VERY THIN PROFILE		200 ns			.5 mm	80 Cel				-20 Cel		4	QUAD		S-XQCC-N24		5.5 V	.83 mm	3.5 mm		2 V						3.5 mm	5609
NB2305AC1HDTR2	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	70 Cel			.25 ns	0 Cel	TIN LEAD	4	DUAL	133.33 MHz	S-PDSO-G8		3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e0		235	4.4 mm	2305
NB2304AC5HDTR2G	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel			.2 ns	0 Cel	MATTE TIN	4	DUAL	133.3 MHz	S-PDSO-G8		3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e3			3 mm	2304
NB100LVEP221FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel			.05 ns	-40 Cel	TIN	20	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB3V1103CMTTBG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1					1.8		0	SMALL OUTLINE, VERY THIN PROFILE		3.5 ns			.5 mm	105 Cel	3-STATE		.075 ns	-40 Cel		3	DUAL	250 MHz	S-PDSO-N8		1.89 V	.8 mm	2 mm		1.71 V		ALSO OPERATES AT 2.5V AND 3.3V VCC NOMINAL SUPPLY		NOT SPECIFIED	NOT SPECIFIED	2 mm	NB3V
NB3N3010BMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1					3.3		0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			.7 ns	0 Cel		2	DUAL	12.3187 MHz	S-PDSO-N8		3.465 V	1 mm	2 mm		3.135 V						2 mm	3N
NBSG14MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR		.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	10500 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		30	260	3 mm	14
100E511/BYAJC	Onsemi		MILITARY	FLAT	28	QFF	SQUARE	CERAMIC	YES				ECL100K	38535Q/M;38534H;883B			-4.5		FLATPACK	QFL28,.4SQ			Clock Drivers	1.27 mm	125 Cel				-55 Cel	Tin/Lead (Sn/Pb)		QUAD		S-XQFP-F28					Not Qualified				e0
NB7L572MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					2.5	2.5/3.3	0	CHIP CARRIER	LCC32,.2SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel			.07 ns	-40 Cel	MATTE TIN	2	QUAD	6000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3V	e3	30	260	5 mm	7L
NBSG111BA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	49	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	GRID ARRAY, LOW PROFILE	BGA49,7X7,40	.35 ns		Clock Drivers	1 mm	70 Cel			.02 ns	-40 Cel	Tin/Lead (Sn/Pb)	10	BOTTOM		S-PBGA-B49		3.465 V	1.4 mm	8 mm	Not Qualified	2.375 V		NECL OPERATING RANGE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0	30	240	8 mm	111
NB100EP223FAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			3.3	1.8,3.3	0	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel			.065 ns	0 Cel	TIN	22	QUAD		S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e3		260	10 mm	100E
NB7L14MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					2.5	2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.15 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	8000 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V				30	260	3 mm	7L
NBSG14MNHTBG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR		.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	10500 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		30	260	3 mm	14
NB3V8312CFAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1					1.8		0	FLATPACK, LOW PROFILE		4.2 ns			.8 mm	85 Cel	3-STATE WITH SERIES RESISTOR		.15 ns	-40 Cel	MATTE TIN	12	QUAD	250 MHz	S-PQFP-G32	2	2 V	1.6 mm	7 mm		1.6 V		ALSO OPERATES AT 2.5V, 3.3V SUPPLY VOLTAGE	e3	30	260	7 mm	NB3V
NB7L111MMN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					2.5	2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.28 ns		Clock Drivers	.5 mm	85 Cel			.02 ns	-40 Cel	TIN LEAD	10	QUAD		S-XQCC-N52		2.625 V	1 mm	8 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e0		235	8 mm	7L
NB100LVEP221MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.71 ns		Clock Drivers	.5 mm	85 Cel			.05 ns	-40 Cel	TIN	20	QUAD		S-XQCC-N52	2	3.8 V	1 mm	8 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	8 mm	100LVE
NB2304AC1DTR2G	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel			.2 ns	0 Cel	MATTE TIN	4	DUAL	133.3 MHz	S-PDSO-G8		3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e3			3 mm	2304
NB7L1MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					2.5		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.15 ns			.5 mm	85 Cel			.005 ns	-40 Cel		4	QUAD		S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V				NOT SPECIFIED	NOT SPECIFIED	3 mm	7L
NB3N1200KMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1					3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 ns			.5 mm	70 Cel	3-STATE		.05 ns	0 Cel	MATTE TIN	24	QUAD		S-XQCC-N64	3	3.465 V	1 mm	9 mm		3.135 V			e3	30	260	9 mm	NB3
NB2305AC1HDT	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	70 Cel			.25 ns	0 Cel	TIN LEAD	4	DUAL	133.33 MHz	S-PDSO-G8		3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e0		235	4.4 mm	2305
NB2305AI1DTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	85 Cel			.25 ns	-40 Cel	TIN	4	DUAL	133.33 MHz	S-PDSO-G8	3	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3	30	260	4.4 mm	2305
NB100LVEP222MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel			.06 ns	-40 Cel		4	QUAD		S-XQCC-N52		3.8 V	1 mm	8 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				8 mm	100LVE
NB2304AI2DTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel			.4 ns	-40 Cel	MATTE TIN	4	DUAL	133.3 MHz	S-PDSO-G8		3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e3			3 mm	2304
NB3F8L3005CMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	QCCN	SQUARE	PLASTIC/EPOXY	YES								1.5/3.3,2.5/3.3		CHIP CARRIER	LCC24,.16SQ,20			Clock Drivers	.5 mm	85 Cel				-40 Cel	MATTE TIN		QUAD		S-PQCC-N24	1				Not Qualified				e3	30	260
NB2305AI1HDT	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3	3.3	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	85 Cel			.25 ns	-40 Cel	TIN LEAD	4	DUAL	133.33 MHz	S-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e0		235	4.4 mm	2305
NBSG14MAHTBG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			2.5	-2.5/-3.3/2.5/3.3	0	GRID ARRAY, THIN PROFILE	LCC16,.12SQ,20	.15 ns		Clock Drivers	1 mm	70 Cel	SERIES-RESISTOR		.015 ns	-40 Cel		4	BOTTOM	10700 MHz	S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V				4 mm	14
PCS3P2042BG-08-CR	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			3.3		0	SMALL OUTLINE, VERY THIN PROFILE					.5 mm	70 Cel				0 Cel		1	DUAL	110 MHz	S-PDSO-N8		3.6 V	.8 mm	2 mm	Not Qualified	3 V						2 mm	3P

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.