SQUARE Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100LVEP11MNR4	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.31 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-XDSO-N8	1	3.8 V	1 mm	2 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e3			2 mm	100LVE
NB3W800LMNTWG	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 ns			.4 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	16	QUAD		S-XQCC-N48	3	3.465 V	1 mm	6 mm		3.135 V			e3	30	260	6 mm	NB3
MC10H643FNR2	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5,-5.2	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	10H
MC10H640FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	6	QUAD	135 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H645FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.8 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.65 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC100E111FNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.78 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.075 ns	-40 Cel	TIN LEAD	9	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e0		235	11.505 mm	100E
MC10E411FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V		NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e3		260	11.505 mm	10E
NB6L16DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.18 ns			.65 mm	85 Cel		.06 ns	-40 Cel	Tin/Lead (Sn90Pb10)	1	DUAL		S-PDSO-G8		3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0	30	235	3 mm	6L
MC100H646FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	100H
MC10LVEP11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.31 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-XDSO-N8	1	3.8 V	1 mm	2 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e4		260	2 mm	10LVE
MC10EL11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		5	-5.2	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC8,.08,20	.34 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL		S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3			2 mm	10EL
MC100E310FN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC10E411FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN LEAD	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V		NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e0		235	11.505 mm	10E
MC100LVE222FA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3/-5	FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	Tin/Lead (Sn80Pb20)	15	QUAD	1500 MHz	S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e0	30	235	10 mm	100LVE
MC10EP11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.12 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e0		235	3 mm	10EP
MC10EP139MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3/5.0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	4	QUAD		S-XQCC-N20		5.5 V	1 mm	4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3			4 mm	10E
MC10H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5,-5.2	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC100EP809FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	TIN	9	QUAD	500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e3	30	260	7 mm	100E
NB6L239MNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.57 ns		Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	TIN LEAD	2	QUAD	3000 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V			e0		235	3 mm	6L
NB3W800LMNTXG	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.4 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	16	QUAD		S-XQCC-N48	3	3.465 V	1 mm	6 mm		3.135 V			e3	30	260	6 mm	NB3
MC100LVE210FN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	11.505 mm	100LVE
MC100EP11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	FLAT	8	HVSSOF	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC8,.08,20	.3 ns		Clock Drivers	.5 mm	85 Cel		.12 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	DUAL		S-PDSO-F8	1	5.5 V	1 mm	2 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V		30	260	2 mm	10EP
MC10H644FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD	135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V			e0		235	8.965 mm	10H
NB3L204KMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 ns			.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	8	QUAD	350 MHz	S-XQCC-N24	1	2.625 V	.9 mm	4 mm		2.375 V		ALSO OPERATES AT 2.97 TO 3.63 V SUPPLY	e3	30	260	4 mm	NB3
MC100LVEP11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL	TR	2.5	+-2.375/+-3.8	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.31 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	DUAL		S-XDSO-N8	1	3.8 V	1 mm	2 mm	Not Qualified	2.375 V	50 mA	NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V		30	260	2 mm	100LVE
MC100LVE210FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100EL11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		5	-4.5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC8,.08,20	.34 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL		S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3			2 mm	100EL
MC100LVE210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC10EP139MNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3/5.0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	4	QUAD		S-XQCC-N20		5.5 V	1 mm	4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3			4 mm	10E
MC100E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC10E111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3	30	260	11.505 mm	10E
MC10LVEP11DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	3 mm	10LVE
MC100LVE310FN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	11.505 mm	100LVE
MC100H646FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	100H
MC10E211FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10LVEP11MNR4	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.31 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-XDSO-N8		3.8 V	1 mm	2 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0			2 mm	10LVE
MC100LVEP11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8		3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	3 mm	100LVE
MC10H640FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	6	QUAD	135 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	10H
MC10H646FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC100E111FN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.78 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.075 ns	-40 Cel	TIN LEAD	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e0		235	11.505 mm	100E
MC100EP809FAG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e3	30	260	7 mm	100E
MC100LVE310FNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	11.505 mm	100LVE
NB3W1200LMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 ns			.5 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	24	QUAD		S-XQCC-N64	3	3.465 V	1 mm	9 mm		3.135 V			e3	30	260	9 mm	NB3
NB4L6254MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR		2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.485 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel	TIN	6	QUAD	3000 MHz	S-PQCC-N32	1	3.465 V	1 mm	5 mm	Not Qualified	2.375 V			e3	30	260	5 mm	4L
MC100LVEP210MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		2.5	+-2.375/+-3.8	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.43 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel		5	QUAD		S-PQCC-N32		3.8 V	1 mm	5 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V				5 mm	100LVE
MC10H644FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD	135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V			e0		235	8.965 mm	10H
MC100H644FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC20,.4SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	Tin/Lead (Sn80Pb20)	4	QUAD	135 MHz	S-PQCC-J20	1	5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V			e0			8.965 mm	100H

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.