SQUARE Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100EL11DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	3 mm	100EL
NB6L239MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.57 ns		Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	MATTE TIN	2	QUAD	3000 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V			e3	30	260	3 mm	6L
NB3L204KMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 ns			.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	8	QUAD	350 MHz	S-XQCC-N24	1	2.625 V	.9 mm	4 mm		2.375 V		ALSO OPERATES AT 2.97 TO 3.63 V SUPPLY	e3	30	260	4 mm	NB3
MC10H643FNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5,-5.2	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC100H640FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	6	QUAD	135 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	100H
MC10E221FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5		CHIP CARRIER		1.125 ns			1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			11.505 mm	10E
MC100EP139MNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3/5.0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	TIN	4	QUAD		S-XQCC-N20	1	5.5 V	1 mm	4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	4 mm	100E
MC10LVEP11DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8		3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	3 mm	10LVE
MC100EP139MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3/5.0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	TIN	4	QUAD		S-XQCC-N20	1	5.5 V	1 mm	4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	4 mm	100E
MC10EP11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	FLAT	8	HVSSOF	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC8,.08,20	.3 ns		Clock Drivers	.5 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-F8		5.5 V	1 mm	2 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3			2 mm	10EP
NB6L14SMNTWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	MATTE TIN	4	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	2.375 V			e3	30	260	3 mm	6L
MC100EP11MNR4	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.27 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-XDSO-N8		5.5 V	1 mm	2 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0			2 mm	100E
MC100EP11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.12 ns	-40 Cel	Tin/Lead (Sn/Pb)	2	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e0	30	235	3 mm	10EP
MC100H641FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN LEAD	9	QUAD	65 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	100H
MC100H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
NB6LQ572MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
MC10H646FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN LEAD	8	QUAD		S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	10H
MC100LVEP210FARG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		2.5	+-2.375/+-3.8	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.43 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	5	QUAD		S-PQFP-G32	2	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	7 mm	100LVE
NB6L11SMNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.45 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	2.375 V				30	260	3 mm	6L
MC100H644FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC20,.4SQ	6.7 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	0 Cel	TIN LEAD	4	QUAD	135 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.965 mm	Not Qualified	4.75 V			e0			8.965 mm	100H
NB6LQ572MMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
MC100E210FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100LVE210FNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQCC-J28	1	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	11.505 mm	100LVE
MC100H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
NB4L339MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	5 ns		Clock Drivers	.5 mm	85 Cel		.19 ns	-40 Cel	TIN	8	QUAD	700 MHz	S-XQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	2.375 V			e3	30	260	5 mm	4L
MC10E211FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100LVE111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3/+-3.8	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
MC100LVEP210MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		2.5	+-2.375/+-3.8	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.43 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	TIN	5	QUAD		S-PQCC-N32	1	3.8 V	1 mm	5 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	5 mm	100LVE
MC100E211FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC10H642FNR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	8	QUAD	100 MHz	S-PQCC-J28	1	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	10H
MC100LVEP111FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-4.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.5 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	TIN LEAD	10	QUAD		S-PQFP-G32		3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	7 mm	100LVE
MC100LVE111FN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3/+-3.8	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Tin/Lead (Sn80Pb20)	9	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0	30	235	11.505 mm	100LVE
MC10E211FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC100H640FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN LEAD	6	QUAD	135 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e0		235	11.505 mm	100H
MC100LVE222FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3/-5	FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	15	QUAD	1500 MHz	S-PQFP-G52	2	3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e3		260	10 mm	100LVE
MC100LVEP210FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		2.5	+-2.375/+-3.8	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.43 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	TIN LEAD	5	QUAD		S-PQFP-G32		3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	7 mm	100LVE
MC100E210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN	4	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100EP11MNTAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		.27 ns			.5 mm	85 Cel		.11 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	DUAL		S-PDSO-N8	1	5.5 V	1 mm	2 mm		3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V		30	260	2 mm	100EP
MC100LVEL11MNR4	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.405 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL	1000 MHz	S-PDSO-N8		3.8 V	1 mm	2 mm	Not Qualified	3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e0			2 mm	100LVEL
MC10H645FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.8 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.65 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
NB6L572MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	MATTE TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
NB4L6254MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR		2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.485 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel	TIN	6	QUAD	3000 MHz	S-PQCC-N32	1	3.465 V	1 mm	5 mm	Not Qualified	2.375 V			e3	30	260	5 mm	4L
NB3W1200LMNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 ns			.5 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	24	QUAD		S-XQCC-N64	3	3.465 V	1 mm	9 mm		3.135 V			e3	30	260	9 mm	NB3
MC100E221FN	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5		CHIP CARRIER		1.125 ns			1.27 mm	85 Cel		.075 ns	0 Cel	TIN LEAD	6	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0			11.505 mm	100E
MC100EL11DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	Tin/Lead (Sn90Pb10)	2	DUAL		S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0	30	235	3 mm	100EL
MC10LVEP11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	TUBE	2.5	+-2.375/+-3.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V	42 mA	NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	3 mm	10LVE
MC100E310FNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	8	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100LVE111FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3/+-3.8	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.