COMMERCIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74120NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL		5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel					DUAL		R-PDIP-T16					Not Qualified
CDC111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3		0	CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	70 Cel		.05 ns		9	QUAD	500 MHz	S-PQCC-J28		3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	11.505 mm	111
SN74120NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL		5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel					DUAL		R-PDIP-T16
CDC351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.8 ns	NICKEL PALLADIUM GOLD	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	25 mA		e4	30	260	8.2 mm	351
SNCDC303N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5		50 pF	2	IN-LINE					2.54 mm	70 Cel		2 ns		6	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	70 mA	FMAX @ CL=30PF				19.305 mm	AS
CDC2536DB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	NICKEL PALLADIUM GOLD	6	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	30	260	10.2 mm	2536
SNCDC587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.5 ns		12	DUAL	150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V						14 mm	SNCD
SNCDC586PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		30 pF	0	FLATPACK, THIN PROFILE					.65 mm	70 Cel	3-STATE	.5 ns		12	QUAD	100 MHz	S-PQFP-G52		3.6 V	1.2 mm	10 mm	Not Qualified	3 V	1 mA					10 mm	ABT
SNCDC536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE	.5 ns		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
CGS2535V	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	STANDARD	4			3.3			0	CHIP CARRIER		5 ns				70 Cel		.35 ns		4	QUAD		S-PQCC-N28		3.6 V				3 V		IT ALSO OPERATS AT 5V NOM					2535
CDC2510APWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	2510
CDC2351DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	NICKEL PALLADIUM GOLD	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V			e4	30	260	15.4 mm	2351
CDC305DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5		4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1.5 ns		4	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	305
LM98555CCMHX/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	64	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	TR	3.3		220 pF	0	SMALL OUTLINE		6.68 ns			.5 mm	70 Cel	3-STATE	.49 ns	MATTE TIN	8	DUAL		R-PDSO-G64	4	5 V	1.2 mm	6.1 mm		3.3 V			e3	30	260	17 mm	98555
CDC111FN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	3.3	3.3		0	CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Driver	1.27 mm	70 Cel		.05 ns	NICKEL PALLADIUM GOLD	9	QUAD	500 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V	80 mA		e4	30	260	11.505 mm	111
CDC586PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	NICKEL PALLADIUM GOLD	12	QUAD	100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	586
CDC2510APWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	2510
CDC2351DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDC2536DBR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	NICKEL PALLADIUM GOLD	6	DUAL	125 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	30	260	10.2 mm	2536
CDC341DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	NICKEL PALLADIUM GOLD	8	DUAL	80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified	4.75 V	33 mA		e4	30	260	12.825 mm	341
DS0026CMM	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2	MOS					1	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel				0	DUAL		S-PDSO-G8		20 V	1.09 mm	3 mm		10 V						3 mm	DS00
SNCDC341DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		4.9 ns			1.27 mm	70 Cel		.6 ns		8	DUAL		R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1NS				12.8 mm	ABT
SN74AS304DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5	50 pF	0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
CDC2351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V	15 mA		e4	NOT SPECIFIED	260	15.4 mm	2351
SNCDC304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5		50 pF	0	IN-LINE					2.54 mm	70 Cel		1 ns		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	75 mA	CENTER PIN VCC AND GND				19.305 mm	AS
SNCDC2586PBG	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		15 pF	0	FLATPACK, LOW PROFILE					.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns		12	QUAD	100 MHz	S-PQFP-G52		3.6 V	1.6 mm	10 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; OUTPUT FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F; RMS JITTER = 25PS				10 mm	ABT
SN74ABT337DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE	SOP20,.4		48 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE			8	DUAL	80 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ABT
CDC318DLR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	6 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns		18	DUAL		R-PDSO-G48		3.465 V	2.79 mm	7.49 mm	Not Qualified	3.135 V				NOT SPECIFIED	NOT SPECIFIED	15.875 mm	318
CDC536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e4	30	260	10.2 mm	536
SNCDC351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.5 ns		10	DUAL		R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified	3 V		MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
CDC2510PWLE	Texas Instruments		COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES					3.3	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.635 mm	70 Cel					DUAL		R-PDSO-G24					Not Qualified
CDC587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE	.5 ns		16	DUAL	150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	14 mm	CDC
SN74AS305N3	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5			4	IN-LINE		9 ns			2.54 mm	70 Cel		1.5 ns		4	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V						19.305 mm	AS
CDC2509BPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
SNCDC2587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.5 ns		16	DUAL	150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V						14 mm	SNCD
CDC2509BPWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
CDC2351DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
HPA00013PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	2			3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel		.2 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL		R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm		3 V			e4	NOT SPECIFIED	260	7.8 mm	CDCF
LMH1982SQX/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1		TR	3.3		15 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE		MATTE TIN	2	QUAD	148.5 MHz	S-XQCC-N32	1	3.465 V	.8 mm	5 mm		3.135 V	70 mA	ALSO REQUIRES 2.5V SUPPLY	e3	30	260	5 mm	1982
CDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
LM98555CCMH/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	64	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	TUBE	3.3		220 pF	0	SMALL OUTLINE		6.68 ns			.5 mm	70 Cel	3-STATE	.49 ns	MATTE TIN	8	DUAL		R-PDSO-G64	4	5 V	1.2 mm	6.1 mm		3.3 V			e3	30	260	17 mm	98555
CDC2536DBRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	2 mA		e4	NOT SPECIFIED	260	10.2 mm	2536
SNCDC509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.25 ns		9	DUAL	125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V						7.8 mm	SNCD
SNCDC112FN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3			0	CHIP CARRIER		.635 ns			1.27 mm	70 Cel	OPEN-EMITTER	.05 ns		9	QUAD		S-PQCC-J28		3.6 V	4.57 mm	11.5062 mm	Not Qualified	3 V	80 mA	STROBED OUTPUT; CONTROL INPUT IS LVTTL COMPATIBLE; MAX PART TO PART SKEW = 0.1NS				11.5062 mm	CDC
CDC305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5		4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1.5 ns		4	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	305
CDC304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5	5		0	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	304
CDC536DBLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2 mm	5.3 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC
CDC509PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		20 Amp	Clock Drivers	.65 mm	70 Cel		.2 ns	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	509

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.