COMMERCIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC340DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	8	SMALL OUTLINE, SHRINK PITCH		4.7 ns			.65 mm	70 Cel		.6 ns		0	DUAL		R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1.1NS				7.2 mm	ABT
SN74120J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL		5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel					DUAL		R-XDIP-T16
SN74ABT328D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES					5	5			SMALL OUTLINE	SOP16,.25		64 Amp	Clock Drivers	1.27 mm	70 Cel					DUAL		R-PDSO-G16					Not Qualified
CDC111FNRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3			0	CHIP CARRIER		.6 ns			1.27 mm	70 Cel		.05 ns	NICKEL PALLADIUM GOLD	9	QUAD		S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4			11.505 mm	111
LMH1982SQX	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE		TIN LEAD	1	QUAD		S-XQCC-N32	1	3.6 V	.8 mm	5 mm	Not Qualified	3 V			e0	40	260	5 mm	1982
CDC2586PBG	Texas Instruments		COMMERCIAL	GULL WING	52	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS		3.3	3.3			FLATPACK	QFP52,.47SQ		12 Amp	Clock Drivers	.635 mm	70 Cel					QUAD		S-PQFP-G52					Not Qualified
SN74ABT337DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5			0	SMALL OUTLINE					1.27 mm	70 Cel	3-STATE			8	DUAL	80 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	4.5 V						12.8 mm	ABT
CDC2516DGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	16	DUAL	125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	12.5 mm	2516
SNCDC305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5		50 pF	4	SMALL OUTLINE					1.27 mm	70 Cel		1.5 ns		4	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA	CENTER PIN VCC AND GND				9.9 mm	AS
CDC341NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE	SOP20,.3	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns		8	DUAL		R-PDSO-G20		5.25 V			Not Qualified	4.75 V							CDC
CDCF2509PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	NICKEL PALLADIUM GOLD	9	DUAL	140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
CDCF2509PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	NICKEL PALLADIUM GOLD	9	DUAL	140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
LM98555CCMHX	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	64	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		3.3			0	SMALL OUTLINE		6.68 ns			.5 mm	70 Cel	3-STATE	.49 ns		8	DUAL		R-PDSO-G64	4	5.5 V	1.1 mm	6.1 mm	Not Qualified	3 V					260	17 mm	98555
SNCDC2582PBG	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3		15 pF	0	FLATPACK, LOW PROFILE					.65 mm	70 Cel	SERIES-RESISTOR	.5 ns		12	QUAD	100 MHz	S-PQFP-G52		3.6 V	1.6 mm	10 mm	Not Qualified	3 V	5 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				10 mm	CDC
CDC318ADLRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	24 Amp	Clock Driver	.635 mm	70 Cel	3-STATE	.25 ns	NICKEL PALLADIUM GOLD	18	DUAL	100 MHz	R-PDSO-G48	2	3.465 V	2.79 mm	7.49 mm	Not Qualified	3.135 V	.5 mA		e4	30	260	15.875 mm	318
CDC2516DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	NICKEL PALLADIUM GOLD	16	DUAL	125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V			e4	30	260	12.5 mm	2516
SNCDC341DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		4.9 ns			.65 mm	70 Cel		.6 ns		8	DUAL		R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1NS				7.2 mm	ABT
LMH1982SQ	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE		TIN LEAD	1	QUAD		S-XQCC-N32	1	3.6 V	.8 mm	5 mm	Not Qualified	3 V			e0	40	260	5 mm	1982
CDC330DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE	SOP24,.4	11 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.5 ns		10	DUAL	100 MHz	R-PDSO-G24		5.25 V	2.65 mm	7.52 mm	Not Qualified	4.75 V				NOT SPECIFIED	NOT SPECIFIED	15.365 mm	330
SNCDC586PBG	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1	BICMOS		3.3		15 pF	0	FLATPACK, LOW PROFILE					.65 mm	70 Cel	3-STATE	.5 ns		12	QUAD	100 MHz	S-PQFP-G52		3.6 V	1.6 mm	10 mm	Not Qualified	3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				10 mm	ABT
CDCF2510PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	NICKEL PALLADIUM GOLD	10	DUAL	140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
SNCDC2582PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BICMOS		3.3			0	FLATPACK, THIN PROFILE					.65 mm	70 Cel	3-STATE	.5 ns		12	QUAD	100 MHz	S-PQFP-G52		3.6 V	1.2 mm	10 mm	Not Qualified	3 V						10 mm	SNCD
SN74AS303N3	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5			2	IN-LINE		9 ns			2.54 mm	70 Cel		2 ns		6	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V						19.305 mm	AS
CDC536DBRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL	100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	10.2 mm	536
CDC341DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL	80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified	4.75 V	33 mA		e4	NOT SPECIFIED	260	12.825 mm	341
SNCDC304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel		1 ns		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	75 mA	CENTER PIN VCC AND GND				9.9 mm	AS
CDC303DRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			5			2	SMALL OUTLINE		9 ns			1.27 mm	70 Cel		2 ns	NICKEL PALLADIUM GOLD	6	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V			e4			9.9 mm	303
SN74AS304N3	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5			0	IN-LINE		9 ns			2.54 mm	70 Cel		1 ns		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V						19.305 mm	AS
SN74ABT329D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES					5	5			SMALL OUTLINE	SOP16,.15			Clock Drivers	1.27 mm	70 Cel					DUAL		R-PDSO-G16					Not Qualified
TLD369P	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	MOS		20			1	IN-LINE		50 ns			2.54 mm	70 Cel				0	DUAL		R-PDIP-T8		22 V	5.08 mm	7.62 mm	Not Qualified	4.75 V						9.81 mm	TLD36
CDC516DGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	NICKEL PALLADIUM GOLD	16	DUAL	125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V	.02 mA		e4	30	260	12.5 mm	516
CDC2510APWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
CDC2536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
CDC319DBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	400 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.6 ns	6 Amp	Clock Driver	.65 mm	70 Cel	3-STATE	.25 ns	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V	.5 mA		e4	NOT SPECIFIED	260	10.2 mm	319
CDC2586PAHRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	NICKEL PALLADIUM GOLD	12	QUAD		S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	2586
CDC516DGGG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	NICKEL PALLADIUM GOLD	16	DUAL	125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified	3 V	.02 mA		e4	30	260	12.5 mm	516
SNCDC303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5		50 pF	2	SMALL OUTLINE					1.27 mm	70 Cel		2 ns		6	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V	70 mA	FMAX @ CL=30PF				9.9 mm	AS
SNCDC351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel	3-STATE	.5 ns		10	DUAL		R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V	25 mA	MAX PART TO PART SKEW = 1NS				15.4 mm	ABT
CDC304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL		5	5		0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns		8	DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	304
CDC2509BPWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns		9	DUAL	125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
SN74AS304N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5	5	50 pF	0	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns		8	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AS
CDC305N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL		5	5		4	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1.5 ns		4	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	305
CDC341NSR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE	SOP20,.3	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns		8	DUAL		R-PDSO-G20		5.25 V			Not Qualified	4.75 V							CDC
CDC112FN	Texas Instruments		COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES					3.3	3.3			CHIP CARRIER	LDCC28,.5SQ			Clock Drivers	1.27 mm	70 Cel					QUAD		S-PQCC-J28					Not Qualified
CDC318ADLG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	24 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	NICKEL PALLADIUM GOLD	18	DUAL	100 MHz	R-PDSO-G48	2	3.465 V	2.79 mm	7.49 mm	Not Qualified	3.135 V	.5 mA		e4	30	260	15.875 mm	318
CDCF2510PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	NICKEL PALLADIUM GOLD	10	DUAL	140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
CDC2586PAHR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	NICKEL PALLADIUM GOLD	12	QUAD	100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	2586
CDC2351PWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V						7.8 mm	2351

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.