GULL WING Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC2586PBG	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	MUX	1	BICMOS			3.3		15 pF	0	FLATPACK, LOW PROFILE					.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		12	QUAD		100 MHz	S-PQFP-G52		3.6 V	1.6 mm	10 mm	Not Qualified		3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; OUTPUT FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F; RMS JITTER = 25PS				10 mm	ABT
SN74ABT337DW	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.4		48 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE		0 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ABT
CDC318DLR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	6 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel		18	DUAL			R-PDSO-G48		3.465 V	2.79 mm	7.49 mm	Not Qualified		3.135 V				NOT SPECIFIED	NOT SPECIFIED	15.875 mm	318
CDC339DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA		e4	30	260	12.8 mm	CDC
CDC536DBG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	10.2 mm	536
SNCDC351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V		MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
CDC2510PWLE	Texas Instruments		COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES						3.3	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			DUAL			R-PDSO-G24					Not Qualified
CDC587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		16	DUAL		150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	14 mm	CDC
SN65LVELT23D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	3.3		20 pF	0	SMALL OUTLINE		2.5 ns	24 Amp		1.27 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		180 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65LVEL
74ACT11208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.5 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ACT
CDC2509BPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
SNCDC2587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		16	DUAL		150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V						14 mm	SNCD
CDCF5801ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
SN65ELT21D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	5		20 pF	0	SMALL OUTLINE		4.5 ns			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V			e4	30	260	4.9 mm	65ELT
CDC2509BPWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
CDC2351DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDC2351MDBREP	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Driver	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-55 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	2	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	2351
CDC337DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	337
HPA00013PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	2				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel		.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL			R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm			3 V			e4	NOT SPECIFIED	260	7.8 mm	CDCF
CDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
CDC208DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.8 mm	208
LM98555CCMH/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	64	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		TUBE	3.3		220 pF	0	SMALL OUTLINE		6.68 ns			.5 mm	70 Cel	3-STATE	.49 ns	0 Cel	MATTE TIN	8	DUAL			R-PDSO-G64	4	5 V	1.2 mm	6.1 mm			3.3 V			e3	30	260	17 mm	98555
CDC2536DBRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	15 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	2 mA		e4	NOT SPECIFIED	260	10.2 mm	2536
SNCDC509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.25 ns	0 Cel		9	DUAL		125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						7.8 mm	SNCD
CDC328ADBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	6.2 mm	328
CDCR83ADBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3			1	SMALL OUTLINE, SHRINK PITCH			36 Amp		.635 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1	DUAL		400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V	70 mA		e4	NOT SPECIFIED	260	8.65 mm	CDC
SN65ELT21DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	5		20 pF	0	SMALL OUTLINE		4.5 ns			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V			e4	30	260	4.9 mm	65ELT
CDC305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5		4	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	305
CDC536DBLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2 mm	5.3 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC
CDC509PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		20 Amp	Clock Drivers	.65 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	509
SNCDC340DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	8	SMALL OUTLINE, SHRINK PITCH		4.7 ns			.65 mm	70 Cel		.6 ns	0 Cel		0	DUAL			R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1.1NS				7.2 mm	ABT
CDCFR83ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	CDCF
SN74ABT328D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES						5	5			SMALL OUTLINE	SOP16,.25		64 Amp	Clock Drivers	1.27 mm	70 Cel			0 Cel			DUAL			R-PDSO-G16					Not Qualified
CDC2586PBG	Texas Instruments		COMMERCIAL	GULL WING	52	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS			3.3	3.3			FLATPACK	QFP52,.47SQ		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			QUAD			S-PQFP-G52					Not Qualified
SNCDC208DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDCR83DBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
CDC5801ADBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		62.5 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	8.65 mm	CDC
CDC328DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	7 ns	64 Amp	Clock Drivers	.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL		80 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
SN74ABT337DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5			0	SMALL OUTLINE					1.27 mm	70 Cel	3-STATE		0 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V						12.8 mm	ABT
CDC2516DGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	16	DUAL		125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V			e4	NOT SPECIFIED	260	12.5 mm	2516
CDC328AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDC209-7DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4		5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	15.6 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.52 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	209
SNCDC305D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5		50 pF	4	SMALL OUTLINE					1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	70 mA	CENTER PIN VCC AND GND				9.9 mm	AS
SN65ELT22DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TR	5			0	SMALL OUTLINE		1.1 ns			1.27 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V			e4	30	260	4.9 mm	65ELT
CDC341NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.3	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL			R-PDSO-G20		5.25 V			Not Qualified		4.75 V							CDC
CDCF2509PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
CDC337DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	30	260	12.825 mm	337
SN65ELT20D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	5			0	SMALL OUTLINE		1.25 ns			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V	16 mA		e4	30	260	4.9 mm	65ELT

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.