GULL WING Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNCDC351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA	MAX PART TO PART SKEW = 1NS				15.4 mm	ABT
CDC304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL			5	5		0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	304
SN65EPT23D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		TUBE	3.3		20 pF	0	SMALL OUTLINE		1.9 ns	24 Amp		1.27 mm	85 Cel		.11 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		300 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EP
CDC2510CPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2510
CGS74CT2525M	Texas Instruments	CLOCK DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			5			0	SMALL OUTLINE		12.4 ns			1.27 mm	85 Cel		.55 ns	-40 Cel		8	DUAL			R-PDSO-G14		5.5 V	1.753 mm	3.9 mm			4.5 V						8.6235 mm	ACT
CDC857-2DGG	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G48	2	2.7 V	1.2 mm	6.1 mm	Not Qualified		2.3 V			e4	30	260	12.5 mm
CDC2509BPWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.2 ns	0 Cel		9	DUAL		125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
CDC351IDWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		10	DUAL		100 MHz	R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	15.4 mm	351
CDCF5801ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDC341NSR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.3	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL			R-PDSO-G20		5.25 V			Not Qualified		4.75 V							CDC
CDC329D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP16,.25	6.6 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	329
SNCDC391DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
SN65LVELT22D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EL
CDC318ADLG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	24 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	18	DUAL		100 MHz	R-PDSO-G48	2	3.465 V	2.79 mm	7.49 mm	Not Qualified		3.135 V	.5 mA		e4	30	260	15.875 mm	318
CDCF5801ADBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDCFR83ADBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	CDCF
CDCF2510PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		14 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		140 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2510
CDC2586PAHR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ,25		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD		100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified		3 V			e4	30	260	10 mm	2586
CDC2351QDWR	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3			0	SMALL OUTLINE		11 ns			1.27 mm	125 Cel	3-STATE	2.5 ns	-40 Cel		10	DUAL			R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V						15.4 mm
SNCDC209DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
CDC2351PWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		10	DUAL		100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						7.8 mm	2351
CDCF2509PWLE	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel		.2 ns	0 Cel		9	DUAL		140 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						7.8 mm	CDCF
CDCR83DBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
CDC5806PW	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25				.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL			R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	6.5 mm	5806
CDC2587DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		12 Amp	Clock Drivers	.5 mm	70 Cel	3-STATE	.5 ns	0 Cel		16	DUAL		150 MHz	R-PDSO-G56		3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	14 mm	CDC
CDC2536DBLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2 mm	5.3 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	CDC
SNCDC391DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SNCDC222PAH	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			3.3			0	FLATPACK, THIN PROFILE		1.1 ns			.65 mm	70 Cel	OPEN-EMITTER	.05 ns	0 Cel		15	QUAD			S-PQFP-G52		3.6 V	1.2 mm	10 mm	Not Qualified		3 V	110 mA					10 mm	CDC
CDC536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		32 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	536
SNCDC2351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3		50 pF	0	SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V		MAX PART TO PART SKEW = 1NS				8.2 mm	ABT
CDC2351MDBREPG4	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-55 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	2	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	2351
CDC318DL	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	6 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel		18	DUAL			R-PDSO-G48		3.465 V	2.79 mm	7.49 mm	Not Qualified		3.135 V				NOT SPECIFIED	NOT SPECIFIED	15.875 mm	318
SNCDC208DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
CDC208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.8 mm	208
CDC2351QDBR	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDC209DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4		5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	15.6 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.52 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	209
SN65EL11DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	5	+-5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified		4.2 V	26 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	3 mm	65EL
CDC2351DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.8 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
SNCDC339DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		9 ns			1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				12.8 mm	ABT
SNCDC392DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
SNCDC341DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		4.9 ns			.65 mm	70 Cel		.6 ns	0 Cel		8	DUAL			R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1NS				7.2 mm	ABT
CDC2509CPWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V	.01 mA		e4	NOT SPECIFIED	260	7.8 mm	2509
V62/12624-01XE	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	+-2.5/+-3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.355 ns	5 Amp	Clock Drivers	.8 mm	125 Cel		.05 ns	-55 Cel	NICKEL PALLADIUM GOLD	20	QUAD		3500 MHz	S-PQFP-G32	3	3.8 V	1.6 mm	7 mm	Not Qualified		2.375 V	85 mA		e4	30	260	7 mm	CDC
SN65LVEP11DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	2.5	+-2.5/+-3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified		2.375 V	45 mA	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	3 mm	65LVEP
CDC2510BPWLE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel		.2 ns	0 Cel		11	DUAL		125 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V	.01 mA			NOT SPECIFIED	NOT SPECIFIED	7.8 mm	CDC
CDC351DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	30	260	15.4 mm	351
LM98555CCMH	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	64	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			3.3			0	SMALL OUTLINE		6.68 ns			.5 mm	70 Cel	3-STATE	.49 ns	0 Cel		8	DUAL			R-PDSO-G64	4	5.5 V	1.1 mm	6.1 mm	Not Qualified		3 V					260	17 mm	98555
CDC2351QDBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH		11 ns			.65 mm	125 Cel	3-STATE	2.5 ns	-40 Cel		10	DUAL			R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V						8.2 mm

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.