Texas Instruments Clock Drivers & Buffers 1,068

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
LMK1D1208RHDT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.575 ns			.5 mm	105 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD		2000 MHz	S-PQCC-N28	1	1.89 V	1 mm	5 mm			1.71 V	95 mA		e4	30	260	5 mm
SN65EPT22DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.55 ns			.65 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V	50 mA		e4	30	260	3 mm	65EL
SN65EPT22DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2				TR	3.3			1	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.55 ns			.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			S-PDSO-G8	1	3.6 V	1.1 mm	3 mm			3 V	50 mA		e4	30	260	3 mm	65EL
SN65EPT22DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			TR	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	50 mA		e4	30	260	4.9 mm	65EL
SN65LVELT23DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TR	3.3		20 pF	0	SMALL OUTLINE		2.5 ns	24 Amp		1.27 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		180 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65LVEL
CDC318ADLR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	24 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	18	DUAL		100 MHz	R-PDSO-G48	2	3.465 V	2.79 mm	7.49 mm	Not Qualified		3.135 V	.5 mA		e4	30	260	15.875 mm	318
CDCVF2505DRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3	3.3	25 pF	0	SMALL OUTLINE	SOP8,.25	.15 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		200 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	2505
DS90LV110TMTC	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS			TUBE	3.3	3.3	5 pF	0	SMALL OUTLINE, SHRINK PITCH	TSSOP28,.25	3.6 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.091 ns	-40 Cel	TIN LEAD	10	DUAL			R-PDSO-G28	3	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V	195 mA		e0	20	235	9.7 mm	90LV
DS90LV110TMTC/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS			TUBE	3.3	3.3	5 pF	0	SMALL OUTLINE, SHRINK PITCH	TSSOP28,.25	3.6 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.091 ns	-40 Cel	MATTE TIN	10	DUAL			R-PDSO-G28	3	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V	195 mA		e3	30	260	9.7 mm	90LV
DS90LV110TMTCX	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	TSSOP28,.25	3.6 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.091 ns	-40 Cel	TIN LEAD	10	DUAL			R-PDSO-G28	3	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e0	20	235	9.7 mm	90LV
LMK00101SQ/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				TR	3.3	1.5/3.3,2.5/3.3	10 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	2.8 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	10	QUAD		200 MHz	S-XQCC-N32	1	3.45 V	.8 mm	5 mm	Not Qualified		2.375 V	25 mA		e3	30	260	5 mm	00101
LMK04001BISQE/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BICMOS			TR	3.3	3.3	10 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	5	QUAD		1570 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified		3.15 V			e3	30	260	7 mm	4000/14000/40000
LMK04001BISQX/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BICMOS			TR	3.3	3.3	10 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	5	QUAD		1570 MHz	S-XQCC-N48	3	3.45 V	.8 mm	7 mm	Not Qualified		3.15 V			e3	30	260	7 mm	4000/14000/40000
LMK04816BISQE/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				TR	3.3	3.3	5 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	Matte Tin (Sn)	12	QUAD		2600 MHz	S-XQCC-N64	3	3.45 V	.8 mm	9 mm	Not Qualified		3.15 V			e3	NOT SPECIFIED	260	9 mm	4000/14000/40000
LMK04816BISQX/NOPB	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				TR	3.3	3.3	5 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20		.5 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	Matte Tin (Sn)	12	QUAD		2600 MHz	S-XQCC-N64	3	3.45 V	.8 mm	9 mm	Not Qualified		3.15 V			e3	NOT SPECIFIED	260	9 mm	4000/14000/40000
SN65ELT20DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	5			0	SMALL OUTLINE		1.25 ns			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V	16 mA		e4	30	260	4.9 mm	65ELT
CDC208NS	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.6 mm	208
DS0026CN	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	MOS							1	IN-LINE					2.54 mm	70 Cel			0 Cel		0	DUAL			R-PDIP-T8		20 V	5.08 mm	7.62 mm			10 V						9.817 mm	DS00
LMK01020ISQ	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1					3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	TIN LEAD	8	QUAD			S-XQCC-N48	2	3.45 V	.8 mm	7 mm			3.15 V			e0	30	235	7 mm	01020
CDC391DBLE	Texas Instruments		INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS				5	5			SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		48 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel			DUAL			R-PDSO-G16					Not Qualified
LMH1982SQE	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1					3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE		0 Cel	TIN LEAD	1	QUAD			S-XQCC-N32	1	3.6 V	.8 mm	5 mm	Not Qualified		3 V			e0	40	260	5 mm	1982
CDC318ADL	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4.5 ns	24 Amp	Clock Driver	.635 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	18	DUAL		100 MHz	R-PDSO-G48	2	3.465 V	2.79 mm	7.49 mm	Not Qualified		3.135 V	.5 mA		e4	30	260	15.875 mm	318
CDC582PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BICMOS				3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD		100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified		3 V			e4	30	260	10 mm	CDC
CDC857-2DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					2.5	2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G48	2	2.7 V	1.2 mm	6.1 mm	Not Qualified		2.3 V			e4	30	260	12.5 mm
SNCDC337DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		9 ns			1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				12.8 mm	ABT
SN65ELT22DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.1 ns		Clock Driver	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified		4.2 V			e4	30	260	3 mm	65ELT
SN74120N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL				5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL			R-PDIP-T16					Not Qualified
SNCDC209DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
CDC340DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	4.8 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel	NICKEL PALLADIUM GOLD	8	DUAL			R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	30	260	12.825 mm	340
SNCDC209-7DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
CDC329ADRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		POLARITY CONTROL SELECTS TRUE OR COMPLEMENTARY OUTPUTS	e4	30	260	9.9 mm	329
CDC2510CPWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2510
SNJ54120W	Texas Instruments		MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC	YES			TTL	38535Q/M;38534H;883B			5	5			FLATPACK	FL16,.3			Clock Drivers	1.27 mm	125 Cel			-55 Cel			DUAL			R-XDFP-F16					Not Qualified
CDC5801ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TUBE	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		62.5 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	8.65 mm	CDC
SN65LVEP11DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	2.5	+-2.5/+-3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified		2.375 V	45 mA	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	3 mm	65LVEP
CDC339DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	CDC
CDC330DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP24,.4	11 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.5 ns	0 Cel		10	DUAL		100 MHz	R-PDSO-G24		5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	15.365 mm	330
CDCP1803MRGETEP	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	125 Cel	3-STATE	.1 ns	-55 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
SNCDC340DB	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	8	SMALL OUTLINE, SHRINK PITCH		4.7 ns			.65 mm	70 Cel		.6 ns	0 Cel		0	DUAL			R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	33 mA	STROBED OUTPUT; MAX PART TO PART SKEW = 1.1NS				7.2 mm	ABT
CDCP1803RTHT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel		3	QUAD		800 MHz	S-PQCC-N24		3.6 V	.9 mm	4 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	4 mm	1803
SNCDC582PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BICMOS				3.3			0	FLATPACK, THIN PROFILE					.65 mm	70 Cel		.5 ns	0 Cel		12	QUAD		100 MHz	S-PQFP-G52		3.6 V	1.2 mm	10 mm	Not Qualified		3 V						10 mm	SNCD
CDC340DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	4.8 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL		40 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	340
CDC857-3DGG	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					2.5	2.5,3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel		10	DUAL			R-PDSO-G48		2.7 V	1.2 mm	6.1 mm	Not Qualified		2.3 V		ALSO REQUIRES 3.3V PLL VOLTAGE		NOT SPECIFIED	NOT SPECIFIED	12.5 mm
SN74120JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL				5	5			IN-LINE	DIP16,.3			Clock Drivers	2.54 mm	70 Cel			0 Cel			DUAL			R-XDIP-T16
CDC2582PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BICMOS				3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD		100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified		3 V			e4	30	260	10 mm	CDC
CDC303N	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	TTL				5	5		2	IN-LINE	DIP16,.3	9 ns	48 Amp	Clock Drivers	2.54 mm	70 Cel		1 ns	0 Cel		6	DUAL		80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm
HPA00016PWR	Texas Instruments	PLL BASED CLOCK DRIVER																												NICKEL PALLADIUM GOLD						1									e4	30	260
CDCDB800RSLR	Texas Instruments	LOW SKEW CLOCK DRIVER		NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	3 ns			.4 mm	105 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD		250 MHz	S-XQCC-N48	1	3.6 V	1 mm	6 mm			3 V	9 mA		e4		260	6 mm	CDC

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.