Texas Instruments Clock Drivers & Buffers 1,068

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN65LVEL11DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3	+-3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.35 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified		3 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e4	30	260	3 mm	65LVEL
CDC2509APWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
CDC5801DBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3			1	SMALL OUTLINE, SHRINK PITCH			16 Amp		.635 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	70 mA		e4	30	260	8.65 mm	5801
CDCDB800RSLT	Texas Instruments	LOW SKEW CLOCK DRIVER		NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	3 ns			.4 mm	105 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD		250 MHz	S-XQCC-N48	1	3.6 V	1 mm	6 mm			3 V	9 mA		e4		260	6 mm	CDC
CDC857-3DGGRG4	Texas Instruments		OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES								2.5,3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	Clock Drivers	.5 mm	85 Cel			0 Cel			DUAL			R-PDSO-G48					Not Qualified
CDC516DGG	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TUBE	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	16	DUAL		125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V	.02 mA		e4	30	260	12.5 mm	516
HPA00014DGGR	Texas Instruments	PLL BASED CLOCK DRIVER		GULL WING		TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES											SMALL OUTLINE, THIN PROFILE, SHRINK PITCH										NICKEL PALLADIUM GOLD		DUAL			R-PDSO-G48	2									e4	30	260
SN65EPT21D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			TUBE	3.3		20 pF	0	SMALL OUTLINE		1.9 ns	24 Amp		1.27 mm	85 Cel		.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		300 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EP
CDC351DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.8 ns	0 Cel		10	DUAL		100 MHz	R-PDSO-G24		3.6 V	2 mm	5.3 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	8.2 mm	351
CDC2582PBG	Texas Instruments		COMMERCIAL	GULL WING	52	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS				3.3	3.3			FLATPACK	QFP52,.47SQ		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			QUAD			S-PQFP-G52					Not Qualified
CDC7005RGZR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.95 ns			.5 mm	85 Cel	3-STATE	.06 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	QUAD		800 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified		3 V		INTEGRATED LOW-NOISE OP AMP	e4	30	260	7 mm	7005
LMH2191TMX/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.5	3.5	33 pF	0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,16	10.5 ns	2 Amp	Clock Drivers	.4 mm	85 Cel		3.1 ns	-40 Cel	TIN SILVER COPPER	2	BOTTOM		52 MHz	R-PBGA-B8	1	5.5 V	.675 mm	1.063 mm	Not Qualified		2.5 V			e1	30	260	1.61 mm	2191
CDC536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		32 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	536
SNCDC304DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5		50 pF	0	SMALL OUTLINE					1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	75 mA	CENTER PIN VCC AND GND				9.9 mm	AS
SNC54120W	Texas Instruments		MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC	YES			TTL	MIL-STD-883 Class B (Modified)			5	5			FLATPACK	FL16,.3			Clock Drivers	1.27 mm	125 Cel			-55 Cel			DUAL			R-XDFP-F16					Not Qualified
LMH2190TM-38/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.5	3.5	50 pF	0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	11 ns		Clock Drivers	.4 mm	85 Cel		8.5 ns	-20 Cel	TIN SILVER COPPER	4	BOTTOM		27 MHz	S-PBGA-B16	1	5.5 V	.675 mm	1.61 mm	Not Qualified		2.5 V			e1	30	260	1.61 mm	2190
SNJ54CDC341WR	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	FLAT	20	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	STANDARD	1	BICMOS	MIL-PRF-38535			5			0	FLATPACK		7 ns			1.27 mm	125 Cel		1.9 ns	-55 Cel		8	DUAL		33 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Not Qualified		4.5 V						13.09 mm	CDC
CDC222PAH	Texas Instruments		COMMERCIAL	GULL WING	52	QFP	SQUARE	PLASTIC/EPOXY	YES			ECL100K				3.3	3.3			FLATPACK	TQFP52,.47SQ			Clock Drivers	.5 mm	70 Cel			0 Cel			QUAD			S-PQFP-G52					Not Qualified
LMK61E2-100M00SIA	Texas Instruments	PLL BASED CLOCK DRIVER
CDC2351QDB	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
SNCDC208-7DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS				5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
54ACT11208FK	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	STANDARD	2	CMOS		4		5	5	50 pF	0	CHIP CARRIER	LCC20,.35SQ	12.1 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	125 Cel	3-STATE	1 ns	-55 Cel		4	QUAD	ENABLE LOW		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	ACT
SNCDC391D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC303D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5	5		2	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	303
SNCDC305DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5		50 pF	4	SMALL OUTLINE					1.27 mm	70 Cel		1.5 ns	0 Cel		4	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	70 mA	CENTER PIN VCC AND GND				9.9 mm	AS
CDC536DBR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G28	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	10.2 mm	536
LMK61E2-312M50SIA	Texas Instruments	PLL BASED CLOCK DRIVER
CDC341DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SOP20,.3	4.9 ns	48 Amp	Clock Drivers	.65 mm	70 Cel		.6 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	341
CDC328DBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5			0	SMALL OUTLINE, SHRINK PITCH		7 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V						6.2 mm
SNCDC536DLR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	BICMOS				3.3		15 pF	0	SMALL OUTLINE, SHRINK PITCH					.635 mm	70 Cel	3-STATE	.5 ns	0 Cel		6	DUAL		100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.5 mm	Not Qualified		3 V	1 mA	MEETS SDRAM SKEW REQUIREMENTS; O/P FREQUENCY RATIOS ARE 0.5F/1.0F/2.0F				9.525 mm	ABT
SN74AS304D	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5	5	50 pF	0	SMALL OUTLINE	SOP16,.25	9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		1 ns	0 Cel		8	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	75 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
CDC208DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4		5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	208
CDC2509APWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
SN65LVEL11DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TUBE	3.3	+-3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.35 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified		3 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e4	30	260	3 mm	65LVEL
CDC2510APW	Texas Instruments		COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES							3.3	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.635 mm	70 Cel			0 Cel			DUAL			R-PDSO-G24					Not Qualified
CDC516DGGR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	16	DUAL		125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V	.02 mA		e4	30	260	12.5 mm	516
SNCDC392D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
SN74AS303DR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	TTL				5		50 pF	2	SMALL OUTLINE		9 ns			1.27 mm	70 Cel		2 ns	0 Cel		6	DUAL		80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified		4.5 V	70 mA					9.9 mm	AS
SNCDC339DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
CDC351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	30	260	15.4 mm	351
SNCDC328DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5.4 ns			1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC2509BPWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	NOT SPECIFIED	260	7.8 mm	2509
CGS74C2525M	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL			SOP				STANDARD	1	CMOS				3.3			0			12.5 ns			1.27 mm	85 Cel		.6 ns	-40 Cel		8						6 V	1.753 mm	3.9 mm			2 V						8.6235 mm	CMOS
SNCDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC337DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	30	260	12.825 mm	337
SNCDC328DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.4 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC328ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel		6	DUAL		100 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
CDCFR83ADBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	CDCF

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.