RECTANGULAR Delay Lines 2,392

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
LTC6994IDCB-2#TRMPBF	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	NO LEAD	6	HVSON	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		YES	TR	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N6	1	5.5 V	.8 mm	2 mm	Not Qualified	TRUE	2.25 V			e3	30	260	3 mm	6994
LTC6994CS6-2#PBF	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	6	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		YES		3.3		SMALL OUTLINE			.95 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	1	5.5 V	1 mm	1.625 mm	Not Qualified	TRUE	2.25 V			e3	30	260	2.9 mm	6994
DS1100Z-250	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS	50 ohm	NO		5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1100Z-250+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS	50 ohm	NO		5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	4.9 mm	1100
B122	Esc Electronics	PASSIVE DELAY LINE	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	120 ns	NO	1	10		100 ohm	NO				IN-LINE	DIP14,.3	Delay Lines	2.54 mm	125 Cel		-55 Cel		DUAL	R-PDIP-T14					Not Qualified	TRUE			MEETS MIL-D-23859/23; MAX DISTORTION 10%; MAX RISE TIME & TEMP. COEFF. CAPTURED
LTC6994IDCB-2#TRPBF	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	NO LEAD	6	HVSON	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		YES	TR	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N6	1	5.5 V	.8 mm	2 mm	Not Qualified	TRUE	2.25 V			e3	30	260	3 mm	6994
LTC6994MPS6-1#PBF	Analog Devices	SILICON DELAY LINE	MILITARY	GULL WING	6	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		YES		3.3		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH			.95 mm	125 Cel		-55 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G6	1	5.5 V	1 mm	1.625 mm		TRUE	2.25 V			e3	30	260	2.9 mm	6994
DS1023S-50	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	140 ns	YES	1	255	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e0			10.3 mm		25 MHz
DS1023S-50+	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	140 ns	YES	1	255	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e3	30	260	10.3 mm		25 MHz
DS1023S-500	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	1038 ns	YES	1	255	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e0			10.3 mm	CMOS/TTL	10 MHz
DS1023S-500+	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	1038 ns	YES	1	255	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e3	30	260	10.3 mm	CMOS/TTL	10 MHz
224-2	Esc Electronics	PASSIVE DELAY LINE	MILITARY	THROUGH-HOLE	24		RECTANGULAR	PLASTIC/EPOXY	200 ns	NO	1	20		200 ohm	NO				IN-LINE				125 Cel		-55 Cel		DUAL	R-PDIP-T24					Not Qualified	TRUE			MAX DISTORTION 10%; MAX ATTENUATION 1DB; MAX RISE TIME & TEMP. COEFF. CAPTURED
DS1023S-500+T	Analog Devices		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1				Not Qualified			60 mA		e3	30	260
DS1023S+25	Dallas Semiconductor		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G16					Not Qualified			60 mA
DS1023S-25	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	76 ns	YES	1	255	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e0			10.3 mm		25 MHz
DS1023S-25+	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	76 ns	YES	1	255	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e3	30	260	10.3 mm		25 MHz
LTC6994CDCB-2#TRPBF	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	6	HVSON	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		YES	TR	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N6	1	5.5 V	.8 mm	2 mm	Not Qualified	TRUE	2.25 V			e3	30	260	3 mm	6994
601-40	Datatronics	ACTIVE DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	40 ns	NO	1	5			NO		5	5	IN-LINE	DIP8/14,.3	Delay Lines	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T8		5.25 V	6.98 mm	10.16 mm	Not Qualified	INVERTED	4.75 V	32 mA					20.32 mm
DS1100LZ-20	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	1	5	CMOS	50 ohm	NO		3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	4.9 mm	1100
DS1100LZ-20+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	1	5	CMOS	50 ohm	NO		3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	4.9 mm	1100
124-4	Esc Electronics	PASSIVE DELAY LINE	MILITARY	THROUGH-HOLE	24		RECTANGULAR	PLASTIC/EPOXY	400 ns	NO	1	20		100 ohm	NO				IN-LINE				125 Cel		-55 Cel		DUAL	R-PDIP-T24					Not Qualified	TRUE			MAX DISTORTION 10%; MAX ATTENUATION 1DB; MAX RISE TIME & TEMP. COEFF. CAPTURED
84309	Lexor	ACTIVE DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	150 ns	NO	1	5	TTL		NO		5		IN-LINE	DIP8/14,.3		2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T14		5.25 V		7.62 mm		TRUE	4.75 V						21 mm	84309
DS1013M-12+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	12 ns	NO	3	1	CMOS		NO		5		IN-LINE			2.54 mm	70 Cel		0 Cel	MATTE TIN	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3			9.375 mm	CMOS
DS1013M-12	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	12 ns	NO	3	1	CMOS		NO		5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS
610-50	Datatronics	ACTIVE DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	SIP	RECTANGULAR	PLASTIC/EPOXY	50 ns	NO	1	5			NO		5	5	IN-LINE	SIP8,.17	Delay Lines	2.54 mm	70 Cel		0 Cel		SINGLE	R-PSIP-T8		5.25 V	8.89 mm	5.08 mm	Not Qualified	INVERTED	4.75 V	32 mA					22.86 mm	610
LTC6994MPS6-2#PBF	Analog Devices		MILITARY	GULL WING	6	TSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1	CMOS		YES			2.5/5	SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37	Delay Lines	.95 mm	125 Cel		-55 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	1				Not Qualified	COMPLEMENTARY		.2 mA		e3	30	260
630-6	Datatronics	ACTIVE DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	SIP	RECTANGULAR	PLASTIC/EPOXY	6 ns	NO	1	5	CMOS		NO		5	5	IN-LINE	SIP8,.1	Delay Lines	2.54 mm	70 Cel		0 Cel		SINGLE	R-XSIP-T8		5.25 V	8.89 mm	5.08 mm	Not Qualified	INVERTED	4.75 V	5 mA					22.86 mm
LTC6994CDCB-1#TRPBF	Analog Devices	SILICON DELAY LINE	COMMERCIAL	NO LEAD	6	HVSON	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		YES	TR	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N6	1	5.5 V	.8 mm	2 mm	Not Qualified	TRUE	2.25 V			e3	30	260	3 mm	6994
524-7.5	Esc Electronics	PASSIVE DELAY LINE	MILITARY	THROUGH-HOLE	24		RECTANGULAR	PLASTIC/EPOXY	750 ns	NO	1	20		500 ohm	NO				IN-LINE				125 Cel		-55 Cel		DUAL	R-PDIP-T24					Not Qualified	TRUE			MAX DISTORTION 10%; MAX ATTENUATION 1DB; MAX RISE TIME & TEMP. COEFF. CAPTURED
604-4	Datatronics	ACTIVE DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	4 ns	NO	1	5			NO		5	5	IN-LINE	DIP8/16,.3	Delay Lines	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T8		5.25 V	8 mm	10.16 mm	Not Qualified	INVERTED	4.75 V	32 mA					22.86 mm
224-6	Esc Electronics	PASSIVE DELAY LINE	MILITARY	THROUGH-HOLE	24		RECTANGULAR	PLASTIC/EPOXY	600 ns	NO	1	20		200 ohm	NO				IN-LINE				125 Cel		-55 Cel		DUAL	R-PDIP-T24					Not Qualified	TRUE			MAX DISTORTION 10%; MAX ATTENUATION 1DB; MAX RISE TIME & TEMP. COEFF. CAPTURED
DECLDL-2-12	Engineered Components	ACTIVE DELAY LINE	OTHER	PIN/PEG	8	QIP	RECTANGULAR	UNSPECIFIED	12 ns	NO	2	1	ECL		NO		-4.5	-4.5	IN-LINE	DIP12,.7	Delay Lines	2.54 mm	85 Cel	OPEN-EMITTER	0 Cel		DUAL	R-XDIP-P8		-4.725 V	8.255 mm	17.78 mm	Not Qualified	COMPLEMENTARY	-4.275 V		BURNED-IN TO LEVEL B OF MIL-STD-883; TYP. ICC = 155MA; MAX TEMP. COEFF. CAPTURED				22.225 mm	100K
DS1110E-50	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO		5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Delay Lines	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			5 mm
DS1110E-50+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e3	30	260	5 mm
DS1110E-500	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	500 ns	YES	1	10	CMOS		NO		5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Delay Lines	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			5 mm
DS1110E-500+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	500 ns	YES	1	10	CMOS		NO		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e3	30	260	5 mm
EP8301	Pca Electronics	ACTIVE DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	50 ns	NO	1	10	TTL		NO		5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDIP-T14	3	5.25 V	6.35 mm	7.62 mm	Not Qualified	TRUE	4.75 V	150 mA	MAX RISE TIME CAPTURED	e0		225		8301	20 MHz
DS1023-500	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	1038 ns	NO	1	255	CMOS		YES		5	5	IN-LINE	DIP16,.3	Delay Lines	2.54 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDIP-T16	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	60 mA		e0		245	19.175 mm	CMOS/TTL	10 MHz
DS1023S-25+T	Analog Devices	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	76 ns	YES	1	255	CMOS		YES		5	5	SMALL OUTLINE	SOP16,.3	Delay Lines	1.27 mm	70 Cel		0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA		e3	30	260	10.3 mm		25 MHz
DS1023S-25/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	76 ns	YES	1	255	CMOS		YES		5		SMALL OUTLINE			1.27 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V			e0			10.3 mm		25 MHz
DS1100Z-100	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO		5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0	20	240	4.9 mm	1100
DS1100Z-100+	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO		5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	4.9 mm	1100
524-2	Esc Electronics	PASSIVE DELAY LINE	MILITARY	THROUGH-HOLE	24		RECTANGULAR	PLASTIC/EPOXY	200 ns	NO	1	20		500 ohm	NO				IN-LINE				125 Cel		-55 Cel		DUAL	R-PDIP-T24					Not Qualified	TRUE			MAX DISTORTION 10%; MAX ATTENUATION 1DB; MAX RISE TIME & TEMP. COEFF. CAPTURED
DS1100Z-100/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO		5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			4.9 mm	1100
DS1100Z-100+T&R	Analog Devices	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO		5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	4.9 mm	1100
601-60	Datatronics	ACTIVE DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	60 ns	NO	1	5			NO		5	5	IN-LINE	DIP8/14,.3	Delay Lines	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T8		5.25 V	6.98 mm	10.16 mm	Not Qualified	INVERTED	4.75 V	32 mA					20.32 mm
DS1010-175	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	175 ns	NO	1	10	CMOS		NO		5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	1010	3.57143 MHz
DS1100Z-500	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	500 ns	YES	1	5	CMOS		NO		5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0	20	240	4.9 mm	1100

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.