RECTANGULAR Delay Lines 2,392

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
DS1100LZ-45/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	45 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0			4.9 mm	1100
DS1000Z-150-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	4.16667 MHz
DS1000M-175	Maxim Integrated		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-XDIP-T8					Not Qualified			75 mA		e0	20	240
DS1005G-125(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			12.695 mm	CMOS/TTL	5 MHz
DS1044G-08(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			12.695 mm	CMOS/TTL	62.5 MHz
DS1033M-20	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	20 ns	NO	3	1	CMOS		NO	3.3	3.3	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		3.6 V	4.572 mm	7.62 mm	Not Qualified	TRUE	2.7 V	25 mA		e0			9.375 mm	1000
DS1033Z-8T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	3.3		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V			e0			4.9 mm	CMOS/TTL	62.5 MHz
DS1044R-7	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	7 ns	YES	4	1	CMOS		NO	5	5	SMALL OUTLINE	SOP14,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			8.65 mm	CMOS
DS1010C-402	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	402 ns	NO	1	10	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V						19.05 mm	1010
DS1005S-125+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	9.9 mm	CMOS/TTL	5 MHz
DS1010-060	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	60 ns	NO	1	10	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	CMOS/TTL	10.4167 MHz
DS1007-004	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	12 ns	NO	7	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T16		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		'7 INDEPENDENT BUFFERED DELAYS WITH DELAY[NS] = 4,4,4,4,12,12,12'	e0			19.175 mm	CMOS/TTL	27.7778 MHz
DS1100LZ-125	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	125 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	10 mA		e0			4.9 mm	1100
DS1100LZ-300	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	300 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	10 mA		e0		245	4.9 mm	1100
DS1033E-08	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.7 V		BOTH LEADING & TRAILING EDGE ACCURACY	e0			6.5 mm	CMOS/TTL	62.5 MHz
DS1020S-25	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	73.75 ns	YES	1	255	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	30 mA	PROGRAMMABLE USING 3-WIRE SERIAL PORT OR 8-BIT PARALLEL PORT	e0			10.3 mm	CMOS	6.77966 MHz
DS1000G-45	Maxim Integrated		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	GWDIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G14					Not Qualified			75 mA		e0
DS1044-08	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	8 ns	NO	4	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			19.05 mm	CMOS/TTL	62.5 MHz
DS1000S-50IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			10.3 mm	1000
DS1000S-500IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	500 ns	YES	1	5	CMOS		NO	5		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V			e0			10.3 mm	1000
DS1045S-3+T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	54 ns	YES	2	15	CMOS		YES	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	35 mA	TWO INDEPENDENTLY PROGRAMMABLE OUTPUTS FROM A SINGLE INPUT	e3			10.3 mm	CMOS/TTL	4.62963 MHz
DS1110LE-175	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	10	CMOS		NO	3.3	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V	150 mA		e0			5 mm	1110
DS1100Z-300+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	300 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	4.9 mm	1100
DS1044R-5	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	5 ns	YES	4	1	CMOS		NO	5	5	SMALL OUTLINE	SOP14,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			8.65 mm	CMOS
DS1013S-20/T&R/004	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.285 mm	CMOS
DS1007S-2+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	16 ns	YES	7	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V			e3	30	260	10.285 mm	1007
DS1110S-50	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	150 mA		e0		245	10.3 mm
DS1044G-20T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V			e0			12.695 mm	CMOS/TTL	25 MHz
DS1100M-60+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	60 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	9.375 mm
DS1013-40	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	40 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			19.05 mm	CMOS
DS1110LE-150	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	1	10	CMOS		NO	3.3	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V	150 mA		e0			5 mm	1110
DS1035M-12	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	12 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			9.375 mm	1035
DS1044-012	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	12 ns	NO	4	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e0			19.05 mm	CMOS/TTL	41.6667 MHz
DS1005K-60	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	60 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	CMOS/TTL	10.4167 MHz
DS1004M-3	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	17 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	INPUT TO 1ST TAP DELAY = 5NS	e0	20	240	9.375 mm	CMOS	36.7647 MHz
DS1005M	Maxim Integrated	SILICON DELAY LINE		THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	5	CMOS		NO	5		IN-LINE			2.54 mm			TIN LEAD	DUAL	R-PDIP-T8			4.572 mm	7.62 mm	Not Qualified	TRUE				e0			9.375 mm	1000
DS1123LE-100	Maxim Integrated	ACTIVE DELAY LINE	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1	BIPOLAR		NO	3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Delay Lines	.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	3 V	30 mA		e0			5 mm	1123
DS1013S-15	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	15 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.285 mm	CMOS
DS1013M-100	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS	3.33333 MHz
DS1035E	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	3	1			NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e0			6.5 mm	1000

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.