RECTANGULAR Delay Lines 2,392

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Total Delay (td)	Surface Mount	No. of Functions	No. of Taps/Steps	Technology	Nominal Output Impedance (Z0)	Programmable Delay Line	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family	Maximum Input Frequency (fmax)
DS1100Z-45/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	45 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0			4.9 mm	1100
DS1035M-6	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	6 ns	NO	3	1	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	35 mA		e0			9.375 mm	1035
DS1013M-015	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	15 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			9.375 mm	CMOS/TTL	22.2222 MHz
DS1020-50	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	137.5 ns	NO	1	255	CMOS		YES	5	5	IN-LINE	DIP16,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDIP-T16	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	30 mA	PROGRAMMABLE USING 3-WIRE SERIAL PORT OR 8-BIT PARALLEL PORT	e0		245	19.175 mm	CMOS	3.63636 MHz
DS1040M-200	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	5	CMOS		YES	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	75 mA	SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 40NS; OUTPUT PULSE WIDTH	e0			9.375 mm	CMOS/TTL	4 MHz
DS1007S-8	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	30 ns	YES	7	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA		e0			10.3 mm	1007
DS1013-060	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	60 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			19.05 mm	CMOS/TTL	5.55556 MHz
DS1012H-V50	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	20 ns	YES	2	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		OUT3 = D3 NAND D4, OUT4 = D3 XOR D4	e0			9.4615 mm	CMOS/TTL	8.33333 MHz
DS1100Z-75/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	75 ns	YES	1	5	CMOS	50 ohm	NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	4.9 mm	1100
DS1000S-50	Maxim Integrated		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G16					Not Qualified			75 mA		e0
DS1100LM-125	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	125 ns	NO	1	5	CMOS	50 ohm	NO	3.3		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8		3.6 V	4.572 mm	7.62 mm	Not Qualified	TRUE	2.7 V			e0			9.375 mm
DS1004R-20	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	4	1			NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			8.65 mm	1000
DS1110E-450	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	450 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V	150 mA		e0		245	5 mm
DS1100LZ-250/T&R	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	250 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0		245	4.9 mm	1100
DS1000Z-200-IND	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA		e0			4.9 mm	CMOS/TTL	3.125 MHz
DS1012H-9	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	25 ns	YES	2	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V		OUT3 = D3 HALF-XNOR D4, OUT4 = D3 XOR D4	e0			9.4615 mm	CMOS/TTL	6.66667 MHz
DS1044R-10+T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT	e3			8.65 mm	CMOS/TTL	50 MHz
DS1044-5	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	5 ns	NO	4	1	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	45 mA		e0			19.05 mm	CMOS
DS1040Z-250	Maxim Integrated	PULSE GENERATOR DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5	CMOS		YES	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	75 mA	SILICON PULSE GENERATOR; PULSE WIDTH CHANGE PER STEP = 50NS	e0			4.9 mm	CMOS/TTL	3.33333 MHz
DS1100M-45+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	45 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	9.375 mm
DS1010S-200/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	200 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.285 mm	1010
DS1005-100	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	100 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0		245	19.05 mm	1005	6.25 MHz
DS1005S-150+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	150 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3			9.9 mm	CMOS/TTL	4.16667 MHz
DS1000K-200	Maxim Integrated		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-XDIP-T14					Not Qualified			75 mA		e0	20	240
DS1044R-6/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	6 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel		DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	8.65 mm	CMOS
DS1110LE-100	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	10	CMOS		NO	3.3	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Delay Lines	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.7 V	150 mA		e0		245	5 mm	1110
DS1013S-50/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	50 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	CMOS	6.66667 MHz
DS1013S-60+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	60 ns	YES	3	1	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.25 V	2.67 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e3	30	260	10.285 mm	CMOS
DS1044R-7T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	7 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			8.65 mm	CMOS/TTL	71.4286 MHz
DS1013-30+	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	30 ns	NO	3	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T14	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e3	30	260	19.05 mm	CMOS
DS1013S-075	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	75 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			10.3 mm	CMOS/TTL	4.44444 MHz
DS1005G-175	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	175 ns	YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	GWDIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0			12.695 mm	CMOS/TTL	3.57143 MHz
DS1100M-30+	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	30 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e3	30	260	9.375 mm
DS1033E-12	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	12 ns	YES	3	1	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.7 V		BOTH LEADING & TRAILING EDGE ACCURACY	e0			6.5 mm	CMOS/TTL	41.6667 MHz
DS1007-003	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	10 ns	NO	7	1	CMOS		NO	5		IN-LINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T16		5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V		'7 INDEPENDENT BUFFERED DELAYS WITH DELAY[NS] = 3,3,3,3,10,10,10'	e0			19.175 mm	CMOS/TTL	33.3333 MHz
DS1000Z-30	Maxim Integrated		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G8					Not Qualified			75 mA		e0
DS1033E-08(TAPE&REEL)	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	3	1	CMOS		NO	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.7 V		BOTH LEADING & TRAILING EDGE ACCURACY	e0			6.5 mm	CMOS/TTL	62.5 MHz
DS1035E-10T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	10 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	5.25 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.75 V			e0			6.5 mm	CMOS/TTL	50 MHz
DS1000K-75	Maxim Integrated		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14					Not Qualified			75 mA		e0
DS1100LZ-100	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	100 ns	YES	1	5	CMOS	50 ohm	NO	3.3	3.3	SMALL OUTLINE	SOP8,.25	Delay Lines	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	10 mA		e0			4.9 mm	1100
DS1010S-400/T&R	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	400 ns	YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.25 V	2.67 mm	7.495 mm	Not Qualified	TRUE	4.75 V	150 mA		e0			10.285 mm	1010
DS1000G-50	Maxim Integrated		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR			YES	1	5	CMOS		NO	5	5	SMALL OUTLINE	GWDIP14,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G14					Not Qualified			75 mA		e0
DS1100M-35	Maxim Integrated	SILICON DELAY LINE	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	35 ns	NO	1	5	CMOS	50 ohm	NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	50 mA		e0		245	9.375 mm
DS1035Z-15T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	15 ns	YES	3	1	CMOS		NO	5		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0			4.9 mm	CMOS/TTL	33.3333 MHz
DS1005M-150	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	150 ns	NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	5.25 V	4.572 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT	e0		245	9.375 mm	CMOS/TTL	4.16667 MHz
DS1010S-125/T&R	Maxim Integrated		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	10	CMOS		NO	5	5	SMALL OUTLINE	SOP16,.4	Delay Lines	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16					Not Qualified			150 mA		e0
DS1044G-8T	Maxim Integrated	SILICON DELAY LINE	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	8 ns	YES	4	1	CMOS		NO	5		SMALL OUTLINE			2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G14		5.25 V	4.57 mm		Not Qualified	TRUE	4.75 V			e0			12.695 mm	CMOS/TTL	62.5 MHz
DS1005M-500	Maxim Integrated		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR			NO	1	5	CMOS		NO	5	5	IN-LINE	DIP8,.3	Delay Lines	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T8					Not Qualified			70 mA		e0

Delay Lines

A delay line is an electronic component used in digital systems to introduce a delay or a time lag in a signal. Delay lines are commonly used in digital systems that require precise timing, synchronization, or control of signals.

Delay lines can be passive or active, depending on the method used to introduce the delay in the signal. Passive delay lines use passive components, such as capacitors, inductors, and resistors, to introduce the delay in the signal. Active delay lines use active components, such as amplifiers, to introduce the delay in the signal.

Delay lines can also be fixed or variable, depending on whether the delay introduced in the signal is fixed or can be adjusted. Fixed delay lines introduce a fixed delay in the signal, while variable delay lines can be adjusted to introduce a variable delay in the signal.

Delay lines are often used in digital systems that require precise timing or synchronization between different components or devices. For example, in a memory system, a delay line may be used to ensure that the signals sent to and received from the memory chips are synchronized and aligned with the clock signal.

Delay lines can also be used to compensate for signal propagation delays caused by long transmission lines or cables. In this case, the delay line is used to introduce a delay in the signal to compensate for the delay caused by the transmission line or cable.