20 Digital Arithmetic Circuits 1,862

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC688PWTE4	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	265 ns		Arithmetic Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	INVERTED	2 V			e4	30	260	6.5 mm	HC/UH
SN74ALS689N1	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified
74ACT11521DBLE	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	13.6 ns		Arithmetic Circuits	.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	INVERTED	4.5 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	ACT
SN74F521D3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL				5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
SN74ALS526DW3	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL							SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
SN74LS385NP1	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74ALS680FN-00	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL		12		5			CHIP CARRIER					1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	INVERTED	4.5 V		WITH OUTPUT LATCH				8.9662 mm	ALS
5962-9754701Q2A	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	YES	1	TTL	MIL-PRF-38535 Class Q	4	TUBE	5	5	15 pF	CHIP CARRIER	LCC20,.35SQ	45 ns	16 Amp	Arithmetic Circuit	1.27 mm	125 Cel		-55 Cel	TIN LEAD	QUAD	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	TRUE	4.5 V	88 mA	CASCADABLE	e0			8.89 mm	LS
SN74LS684FN	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL		8		5	5	45 pF	CHIP CARRIER	LDCC20,.4SQ	30 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	INVERTED	4.5 V	65 mA	WITH A = B & A > B OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74LS637DWR	Texas Instruments	ERROR DETECTION AND CORRECTION CIRCUIT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5		45 pF	SMALL OUTLINE					1.27 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	144 mA					12.8 mm	LS
SN74ALS280FN	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL		9		5		50 pF	CHIP CARRIER	LDCC20,.4SQ	20 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA	ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	ALS
SN74ALS526J4	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN74LS689N	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		8		5	5	45 pF	IN-LINE	DIP20,.3	35 ns		Arithmetic Circuits	2.54 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	65 mA	CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	LS
SN74LS683N	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		8		5	5	45 pF	IN-LINE	DIP20,.3	35 ns		Arithmetic Circuits	2.54 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	70 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	LS
SN74ALS518DW3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL				5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
SN74ALS688NP3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20
74ACT11521N	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	CMOS		8		5	5	50 pF	IN-LINE	DIP20,.3	13.6 ns		Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V		CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ACT
5962-90541012X	Texas Instruments	ADDER/SUBTRACTOR	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	2	TTL	MIL-STD-883	1		5			CHIP CARRIER		50 ns				125 Cel		-55 Cel		QUAD	S-CQCC-N20		5.5 V			Not Qualified		4.5 V							LS
SN74ALS680N	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	TTL		12		5		50 pF	IN-LINE	DIP20,.3	38 ns		Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	27 mA	WITH OUTPUT LATCH		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ALS
SN74ALS518NSRG4	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5	5		SMALL OUTLINE	SOP20,.3	33 ns		Arithmetic Circuits	1.27 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		WITH PULL-UP RESISTORS ON Q INPUTS; CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	12.6 mm	ALS
SN74HC682N3	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		CMOS					2/6		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20
SN74HC180FHP4	Texas Instruments	PARITY GENERATOR/CHECKER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES		CMOS							CHIP CARRIER	LCC20,.35SQ			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N20
SN74LS689DW3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL				5	5		SMALL OUTLINE	SOP20,.4			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
SN74ALS679DWG4	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		12		5	5	50 pF	SMALL OUTLINE	SOP20,.4	35 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	28 mA	WITH INHIBIT		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74HC682JP4	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		CMOS					2/6		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-XDIP-T20
SN74HC382FH	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES		CMOS							CHIP CARRIER	LCC20,.35SQ			Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N20					Not Qualified
SN74ALS6311FN	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL		10		5	5		CHIP CARRIER	LDCC20,.4SQ	12 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	ALS
SN74HC682DWRG4	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5	2/6		SMALL OUTLINE	SOP20,.4	344 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4	30	260	12.8 mm	HC/UH
SN74HC381N	Texas Instruments	ARITHMETIC LOGIC UNIT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		CMOS							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74LS385J	Texas Instruments	ADDER/SUBTRACTOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	4	TTL		1		5		15 pF	IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified		4.75 V	75 mA	SERIAL ADDER/SUBTRACTOR		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN74HC688DW-00R	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5		50 pF	SMALL OUTLINE		265 ns			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	2 V		CASCADABLE				12.8 mm	HC/UH
SN74S280FN3	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20
CD74HC688PWT	Texas Instruments	MAGNITUDE COMPARATOR	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8	TR	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	255 ns	5.2 Amp	Arithmetic Circuits	.65 mm	125 Cel		-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	INVERTED	2 V	.08 mA	CASCADABLE	e4	NOT SPECIFIED	260	6.5 mm	HC/UH
SN74ALS526N1	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74AS282J	Texas Instruments	LOOK-AHEAD CARRY GENERATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		TTL							IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20					Not Qualified
SN74ALS521NP1	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74ALS6311DWR	Texas Instruments	ADDRESS COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		10		5	5		SMALL OUTLINE	SOP20,.4	12 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74LS681DW	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		4		5		5 pF	SMALL OUTLINE	SOP20,.4	50 ns		Arithmetic Circuits	1.27 mm	70 Cel	3-STATE	0 Cel		DUAL	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	150 mA	CAPABLE OF 16 LOGIC & ARITHMETIC OPERATIONS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74LS683DWR	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5		45 pF	SMALL OUTLINE		35 ns			1.27 mm	70 Cel	OPEN-COLLECTOR	0 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	70 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS				12.8 mm	LS
SN74AS280FN	Texas Instruments	PARITY GENERATOR/CHECKER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	TTL		9		5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	11 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	35 mA	ODD/EVEN PARITY GENERATOR		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	AS
SN74LS682N3	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20
SN74ALS688NSRG4	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5	5		SMALL OUTLINE	SOP20,.3	20 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	INVERTED	4.5 V		CASCADABLE	e4	30	260	12.6 mm	ALS
SN74S381DWR	Texas Instruments	ARITHMETIC LOGIC UNIT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		4		5		15 pF	SMALL OUTLINE		25 ns			1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	160 mA	CAPABLE OF 3 LOGIC & ARITHMETIC OPERATIONS				12.8 mm	S
74ACT11520DW	Texas Instruments	IDENTITY COMPARATOR	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	CMOS		8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	13.9 ns		Arithmetic Circuits	1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V		WITH PULL-UP RESISTORS ON B INPUTS; CASCADABLE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ACT
SN74HC684NP3	Texas Instruments	MAGNITUDE COMPARATOR	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		CMOS					2/6		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T20
SN74LS682DWRG4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	TTL		8	TR	5	5	45 pF	SMALL OUTLINE	SOP20,.4	30 ns	24 Amp	Arithmetic Circuits	1.27 mm	70 Cel		0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.85 V	70 mA		e4	NOT SPECIFIED	260	12.8 mm	LS
SN74LS682DWRE4	Texas Instruments	MAGNITUDE COMPARATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	TTL		8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	30 ns		Arithmetic Circuits	1.27 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.85 V	70 mA	WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS	e4	30	260	12.8 mm	LS
SN74LS688NP3	Texas Instruments	IDENTITY COMPARATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL				5	5		IN-LINE	DIP20,.3			Arithmetic Circuits	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20

Digital Arithmetic Circuits

Digital arithmetic circuits are electronic circuits designed to perform arithmetic operations on digital signals. These circuits are essential components of digital systems, such as microprocessors, digital signal processors, and programmable logic devices.

Digital arithmetic circuits can perform various arithmetic operations, including addition, subtraction, multiplication, division, and modulo arithmetic. These operations are performed using binary arithmetic, where numbers are represented using the binary number system (0s and 1s).

Adders are one of the most commonly used digital arithmetic circuits. They are used to perform binary addition, where two binary numbers are added to produce a sum. Adders can be designed using various techniques, including ripple carry adders, carry look-ahead adders, and carry select adders.

Subtractors are also commonly used digital arithmetic circuits. They are used to perform binary subtraction, where one binary number is subtracted from another to produce a difference. Subtractors can be designed using techniques, including ripple borrow subtractors, borrow look-ahead subtractors, and borrow select subtractors.

Multiplexers and demultiplexers are digital circuits that can be used for various arithmetic operations, such as multiplication and division. Multiplexers can be used to select one of several input signals based on a control signal, while demultiplexers can be used to distribute a single input signal to several outputs based on a control signal.

Digital arithmetic circuits can also be designed using programmable logic devices, such as field-programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). These devices can be programmed to implement various arithmetic operations and can be reprogrammed to adapt to changing system requirements.