INDUSTRIAL Digital Counters 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Load or Preset Input	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Operation Mode	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC697N1	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		YES		5	5		IN-LINE	DIP20,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified					NOT SPECIFIED	NOT SPECIFIED
SN74HC190NP3	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		YES			2/6		IN-LINE	DIP16,.3	ASYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-PDIP-T16
SN74LV4040ADBLE	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	12	YES		2.5			SMALL OUTLINE, SHRINK PITCH		ASYNCHRONOUS	23 ns			.65 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	2 V						6.2 mm	LV/LV-A/LVX/H
SN74HC690N1	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		YES		5	5		IN-LINE	DIP20,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified					NOT SPECIFIED	NOT SPECIFIED
SN74AHC4040N	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		NO			2/5.5	50 pF	IN-LINE	DIP16,.3	ASYNCHRONOUS		8 Amp	Counters	2.54 mm	85 Cel	UP			-40 Cel		DUAL		R-PDIP-T16					Not Qualified					NOT SPECIFIED	NOT SPECIFIED
SN74HC4040DWR-00	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	12	YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	38 ns			1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	22 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	2 V						10.3 mm	HC/UH
SN74HC4060N3	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		NO			2/6		IN-LINE	DIP16,.3	ASYNCHRONOUS			Counters	2.54 mm	85 Cel	UP			-40 Cel		DUAL		R-PDIP-T16
SN74HC390J4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS		NO			2/6		IN-LINE	DIP16,.3	ASYNCHRONOUS			Counters	2.54 mm	85 Cel	UP			-40 Cel		DUAL		R-XDIP-T16
SN74HC590FH	Texas Instruments	BINARY COUNTER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		NO			2/6		CHIP CARRIER	LCC20,.35SQ	ASYNCHRONOUS			Counters	1.27 mm	85 Cel	UP	3-STATE		-40 Cel		QUAD		S-XQCC-N20					Not Qualified					NOT SPECIFIED	NOT SPECIFIED
SN74HC160N-00	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4	YES		5		50 pF	IN-LINE		SYNCHRONOUS	51 ns			2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	2 V		TCO OUTPUT				19.305 mm	HC/UH
SN74HC4020PWTE4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	14	NO	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	ASYNCHRONOUS	190 ns	4 Amp	Counters	.65 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	2 V		12 OUTPUTS AVAILABLE	e4	30	260	5 mm	HC/UH
SN74LV161ADRE4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	4	YES	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	22.5 ns	6 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2 V		TCO OUTPUT	e4	30	260	9.9 mm	LV/LV-A/LVX/H
SN74HC191JP4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		YES			2/6		IN-LINE	DIP16,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-XDIP-T16
SN74HC4017N-10	Texas Instruments	RING COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	10	YES		5		50 pF	IN-LINE		SYNCHRONOUS	58 ns			2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	2 V		JOHNSON COUNTER WITH 10 DECODED OUTPUTS; TCO OUTPUT; GATED CLOCK				19.305 mm	HC/UH
SN74HC393PWT	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS	4		TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	ASYNCHRONOUS	360 ns	5.2 Amp	Counters	.65 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	28 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm	Not Qualified	2 V	.08 mA		e4	NOT SPECIFIED	260	5 mm	HC/UH
SN74HC193NSLE	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	17000000 Hz	CMOS		YES	TR		2/6	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS		4 Amp	Counters	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-PDSO-G16					Not Qualified
SN74HC191DT	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	17000000 Hz	CMOS	4		TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	240 ns	5.2 Amp	Counters	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	19 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	.08 mA	RCO OUTPUT	e4	NOT SPECIFIED	260	9.9 mm	HC/UH
SN74HC490DW3	Texas Instruments	DECADE COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		NO					SMALL OUTLINE	SOP16,.4	ASYNCHRONOUS			Counters	1.27 mm	85 Cel	UP			-40 Cel		DUAL		R-PDSO-G16
SN74HC699NP3	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		YES		5	5		IN-LINE	DIP20,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		DUAL		R-PDIP-T20										NOT SPECIFIED	NOT SPECIFIED
SN74LV161ANSR	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	4		TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS	22.5 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	2 V	.02 mA	TCO OUTPUT	e4	NOT SPECIFIED	260	10.2 mm	LV/LV-A/LVX/H
CD74HC4510H	Texas Instruments	DECADE COUNTER	INDUSTRIAL	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES	1		CMOS	4	YES		4.5			UNCASED CHIP		SYNCHRONOUS	275 ns				85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		UPPER	28 MHz	R-XUUC-N16		6 V			Not Qualified	2 V							HC/UH
SN74HC193FHP4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		YES			2/6		CHIP CARRIER	LCC20,.35SQ	SYNCHRONOUS			Counters	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		QUAD		S-XQCC-N20
SN74HC4024JP4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		NO			2/6		IN-LINE	DIP14,.3	ASYNCHRONOUS			Counters	2.54 mm	85 Cel	UP			-40 Cel		DUAL		R-XDIP-T14
SN74HC4020DBRE4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	14	NO	TR	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	ASYNCHRONOUS	190 ns	4 Amp	Counters	.65 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	2 V		12 OUTPUTS AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	HC/UH
SN74HC590AN3	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8	NO		5	2/6		IN-LINE	DIP16,.3	ASYNCHRONOUS	380 ns		Counters	2.54 mm	85 Cel	UP	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	19 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	2 V		RCO OUTPUT; REGISTERED OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74HC193DRG4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	17000000 Hz	CMOS	4	YES	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	315 ns	4 Amp	Counters	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	19 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V		SEPARATE UP/DOWN CLOCK	e4	30	260	9.9 mm	HC/UH
SN74HC4020DBRG4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	14	NO	TR	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	ASYNCHRONOUS	190 ns	4 Amp	Counters	.65 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	2 V		12 OUTPUTS AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	HC/UH
SN74HC4020DR-00	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	14	YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	38 ns			1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	22 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	2 V		OUTPUTS FROM 12 STAGES AVAILABLE				9.9 mm	HC/UH
SN74HC490DW-00	Texas Instruments	DECADE COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	4	YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	59 ns			1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	2 V						10.3 mm	HC/UH
SN74HC162FN	Texas Instruments	DECADE COUNTER	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		YES			2/6		CHIP CARRIER	LDCC20,.4SQ	SYNCHRONOUS			Counters	1.27 mm	85 Cel	UP			-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74HC192J	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		YES			2/6		IN-LINE	DIP16,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-XDIP-T16					Not Qualified
SN74HC4061DW-00	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	14	YES		5		50 pF	SMALL OUTLINE		ASYNCHRONOUS	123 ns			1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	22 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	2 V						10.3 mm	HC/UH
SN74HC192FH	Texas Instruments	DECADE COUNTER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		YES			2/6		CHIP CARRIER	LCC20,.35SQ	SYNCHRONOUS			Counters	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74HC162FHP4	Texas Instruments	DECADE COUNTER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		YES			2/6		CHIP CARRIER	LCC20,.35SQ	SYNCHRONOUS			Counters	1.27 mm	85 Cel	UP			-40 Cel		QUAD		S-XQCC-N20
SN74HC4040N3	Texas Instruments	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	12	NO		5	2/6		IN-LINE	DIP16,.3	ASYNCHRONOUS	190 ns		Counters	2.54 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	2 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74HC692FH	Texas Instruments	DECADE COUNTER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		YES		5	5		CHIP CARRIER	LCC20,.35SQ	SYNCHRONOUS			Counters	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		QUAD		S-XQCC-N20					Not Qualified					NOT SPECIFIED	NOT SPECIFIED
SN74HC390N-00	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS	3	YES		5		50 pF	IN-LINE		ASYNCHRONOUS	46 ns			2.54 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	2 V		DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS				19.305 mm	HC/UH
SN74HC4020DTG4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	14	NO	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	190 ns	4 Amp	Counters	1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V		12 OUTPUTS AVAILABLE	e4	30	260	9.9 mm	HC/UH
SN74LV161APWRG4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	4		TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	22.5 ns	12 Amp	Counters	.65 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	2 V	.02 mA	TCO OUTPUT	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
SN74LV4040ARGYRG4	Texas Instruments	BINARY COUNTER	INDUSTRIAL	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	12	YES	TR	2.5	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16/20,.14X.16,20	ASYNCHRONOUS	28 ns	6 Amp	Counters	.5 mm	85 Cel	UP	3-STATE	NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	125 MHz	R-PQCC-N16	2	5.5 V	1 mm	3.5 mm	Not Qualified	2 V			e4	30	260	4 mm	LV/LV-A/LVX/H
SN74HC696N	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		NO		5	5		IN-LINE	DIP20,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified					NOT SPECIFIED	NOT SPECIFIED
SN74HC160N	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	25000000 Hz	CMOS	4	YES		5	2/6	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	255 ns	5.2 Amp	Counters	2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	2 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74HC160FH	Texas Instruments	DECADE COUNTER	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		YES			2/6		CHIP CARRIER	LCC20,.35SQ	SYNCHRONOUS			Counters	1.27 mm	85 Cel	UP			-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74HC692N1	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		YES		5	5		IN-LINE	DIP20,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified					NOT SPECIFIED	NOT SPECIFIED
SN74HC160J	Texas Instruments	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		YES			2/6		IN-LINE	DIP16,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	UP			-40 Cel		DUAL		R-XDIP-T16					Not Qualified
SN74HC192FN3	Texas Instruments	DECADE COUNTER	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		YES			2/6		CHIP CARRIER	LDCC20,.4SQ	SYNCHRONOUS			Counters	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		QUAD		S-PQCC-J20
SN74LV4040ANSR	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	12		TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.3	ASYNCHRONOUS	28 ns	12 Amp	Counters	1.27 mm	85 Cel	UP	3-STATE	NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	2 V	.02 mA		e4	NOT SPECIFIED	260	10.2 mm	LV/LV-A/LVX/H
SN74HC4061D	Texas Instruments	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	14	NO		5		50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	615 ns	5.2 Amp	Counters	1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	2 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	HC/UH

Digital Counters

Digital counters are electronic circuits that can be used to count and keep track of the number of events or occurrences in a digital system. They are commonly used in digital systems to generate timing signals, to control sequencing, and to implement digital control functions.

Digital counters can be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs). They can also be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops.

Digital counters can be classified into two main types: synchronous counters and asynchronous counters. Synchronous counters use a common clock signal to synchronize the operation of all the flip-flops in the counter. Asynchronous counters, on the other hand, do not use a common clock signal and rely on the propagation delay of the flip-flops to sequence their operation.

Digital counters can also be classified based on their counting sequence. They can count up, down, or both up and down, depending on the application. Up counters increment the count each time an input pulse is received, while down counters decrement the count each time an input pulse is received. Up-down counters can count both up and down, depending on the direction of the input signal.

Digital counters can be used in various applications, including frequency division, time delay generation, event counting, and sequence control. They can be used to generate timing signals for clocking digital circuits, to control the sequencing of operations in a digital system, and to implement digital control functions, such as shift registers and sequence generators.