INDUSTRIAL Digital Counters 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Load or Preset Input	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Operation Mode	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100EP016FA	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	8		TRAY	3.3	-4.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	SYNCHRONOUS	.7 ns		Counters	.8 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	3 V	200 mA	NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V	e0	30	235	7 mm	100EP
MC10EP016FA	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	8			3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	SYNCHRONOUS	.65 ns		Counters	.8 mm	85 Cel	UP	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	1300 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	3 V	200 mA	NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V	e0		235	7 mm	10E
MC10EP016FAG	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	8			3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	SYNCHRONOUS	.65 ns		Counters	.8 mm	85 Cel	UP	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	1300 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	3 V	200 mA	NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V	e3	30	260	7 mm	10E
MC10EP016MNG	Onsemi	BINARY COUNTER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	8			3.3	-5.2		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	SYNCHRONOUS	.65 ns		Counters	.5 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		QUAD	1300 MHz	S-PQCC-N32		5.5 V	1 mm	5 mm	Not Qualified	3 V	200 mA	NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V				5 mm	10E
MC74AC163MEL	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS	4	YES	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS	13.5 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	95 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	2 V			e4		260	10.2 mm	AC
MC74AC161DW	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS	4	YES		5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	13.5 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	95 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	2 V			e0	30	240	9.9 mm	AC
MC74ACT161M	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4	YES		5	5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS	11.5 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G16		5.5 V	2.05 mm	5.275 mm	Not Qualified	4.5 V			e4			10.2 mm	ACT
74VHC4040MX	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	12	NO	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	17.5 ns	8 Amp	Counters	1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	TIN	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2 V			e3	30	260	9.9 mm	AHC/VHC/H/U/V
MC74AC161N	Onsemi	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	60000000 Hz	CMOS	4	YES		5	3.3/5	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	13.5 ns	12 Amp	Counters	2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	95 MHz	R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	2 V		TCO OUTPUT	e0	30	235	19.175 mm	AC
MC74ACT161DT	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4	YES		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	11.5 ns	24 Amp	Counters	.65 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	4.5 V						5 mm	ACT
MC74HC193J	Onsemi	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	1		CMOS	4	YES					IN-LINE		SYNCHRONOUS					85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL		R-CDIP-T16		6 V				2 V							HC/UH
MC74ACT161ML2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS		YES	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS		24 Amp	Counters	1.27 mm	85 Cel	UP			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified				e0
MC74AC163DG	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4			5			SMALL OUTLINE		SYNCHRONOUS	13.5 ns			1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	95 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm		2 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AC
MC74ACT161N	Onsemi	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	100000000 Hz	CMOS	4	YES		5	5	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	11.5 ns	24 Amp	Counters	2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	100 MHz	R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	4.5 V		TCO OUTPUT	e0	30	235	19.175 mm	ACT
MC74AC163MELG	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS	4	YES	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS	13.5 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	95 MHz	R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	2 V			e4		260	10.2 mm	AC
MC74AC163N	Onsemi	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	60000000 Hz	CMOS	4	YES		5	3.3/5	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	13.5 ns	12 Amp	Counters	2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	95 MHz	R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	2 V		TCO OUTPUT	e0		235	19.175 mm	AC
MC74ACT163DR2G	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4		TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	12 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	105 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		TCO OUTPUT	e3	30	260	9.9 mm	ACT
MC74HC192N	Onsemi	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		YES			2/6		IN-LINE	DIP16,.3	SYNCHRONOUS			Counters	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16					Not Qualified				e0
MC74ACT161DR2G	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	100000000 Hz	CMOS	4		TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	11.5 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		TCO OUTPUT	e3	30	260	9.9 mm	ACT
MC74ACT161D	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	100000000 Hz	CMOS	4	YES		5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	11.5 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		TCO OUTPUT	e0		235	9.9 mm	ACT
MC74VHC393ML2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		NO	TR		2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	ASYNCHRONOUS		8 Amp	Counters	1.27 mm	85 Cel	UP			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified				e0
MC74AC161ML1	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS		YES	TR		3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS		12 Amp	Counters	1.27 mm	85 Cel	UP			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified	3 V			e0
MC74AC4040M	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	100000000 Hz	CMOS	12	NO		3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	ASYNCHRONOUS	14 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	120 MHz	R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	2 V			e4			10.2 mm	AC
74VHC161MTC	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	85000000 Hz	CMOS	4	YES	RAIL	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	18.5 ns	8 Amp	Counters	.65 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	2 V			e4	30	260	5 mm	AHC/VHC/H/U/V
MC74AC161DWR2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS	4	YES	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	13.5 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	95 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	2 V			e0	30	240	9.9 mm	AC
MC74ACT163N	Onsemi	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	105000000 Hz	CMOS	4	YES		5	5	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	12 ns	24 Amp	Counters	2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	105 MHz	R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	4.5 V		TCO OUTPUT	e0		235	19.175 mm	ACT
74VHC161MTCX	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	85000000 Hz	CMOS	4	YES	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	18.5 ns	8 Amp	Counters	.65 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	2 V			e4	30	260	5 mm	AHC/VHC/H/U/V
MC74AC161MG	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS	4	YES		5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS	13.5 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	95 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	2 V			e4		260	10.2 mm	AC
MC74AC4040ML1	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	100000000 Hz	CMOS		NO	TR		3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	ASYNCHRONOUS		12 Amp	Counters	1.27 mm	85 Cel	UP			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified				e0
MC74AC163NG	Onsemi	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	60000000 Hz	CMOS	4	YES		5	3.3/5	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	13.5 ns	12 Amp	Counters	2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	95 MHz	R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	2 V		TCO OUTPUT	e3		260	19.175 mm	AC
MC74ACT163DW	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4	YES		5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	12 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	105 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V			e0	30	240	9.9 mm	ACT
MC74AC4040DR2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	100000000 Hz	CMOS	12	NO	TR	3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	ASYNCHRONOUS	14 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	120 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V			e0		235	9.9 mm	AC
SN74LS393ML1	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	TTL		NO	TR	5	5		SMALL OUTLINE	SOP14,.3	ASYNCHRONOUS		4 Amp	Counters	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified		26 mA		e0
MC74ACT163D	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4	YES		5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	12 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	105 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		TCO OUTPUT	e0		235	9.9 mm	ACT
MC74AC163DTR2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS	4	YES	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	SYNCHRONOUS	13.5 ns	12 Amp	Counters	.65 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	95 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	2 V						5 mm	AC
MC74VHC393ML1	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		NO	TR		2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	ASYNCHRONOUS		8 Amp	Counters	1.27 mm	85 Cel	UP			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified				e0
MC74AC4040MELG	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	100000000 Hz	CMOS	12	NO	TR	3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	ASYNCHRONOUS	14 ns	12 Amp	Counters	1.27 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	120 MHz	R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	2 V			e4	30	260	10.2 mm	AC
MC74ACT161DWR2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4	YES	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	11.5 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V			e0	30	240	9.9 mm	ACT
MC74ACT163DG	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4			5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	12 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	105 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		TCO OUTPUT	e3	30	260	9.9 mm	ACT
74VHC4040MTC	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	12	NO	RAIL	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	ASYNCHRONOUS	17.5 ns	8 Amp	Counters	.65 mm	85 Cel	UP		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	2 V			e4	30	260	5 mm	AHC/VHC/H/U/V
MC74ACT163DR2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4	YES	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	SYNCHRONOUS	12 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	105 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		TCO OUTPUT	e0		235	9.9 mm	ACT
74VHC161SJ	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4	YES		3.3			SMALL OUTLINE		SYNCHRONOUS	18.5 ns			1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2.1 mm	5.3 mm		2 V						10.2 mm	AHC/VHC/H/U/V
MC74ACT161NG	Onsemi	BINARY COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	100000000 Hz	CMOS	4	YES		5	5	50 pF	IN-LINE	DIP16,.3	SYNCHRONOUS	11.5 ns	24 Amp	Counters	2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	100 MHz	R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	4.5 V		TCO OUTPUT	e3		260	19.175 mm	ACT
MC74AC163MR1	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS		YES	TR		3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS		12 Amp	Counters	1.27 mm	85 Cel	UP			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified	3 V			e0
MC14518BCL	Onsemi	DECADE COUNTER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS	4	YES		5			IN-LINE		SYNCHRONOUS	560 ns			2.54 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel		DUAL		R-GDIP-T16		18 V	4.19 mm	7.62 mm		3 V		GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT				19.3 mm	4000/14000/40000
MC74AC161ML2	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS		YES	TR		3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS		12 Amp	Counters	1.27 mm	85 Cel	UP			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified	3 V			e0
MC74ACT161MELG	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	4	YES	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.3	SYNCHRONOUS	11.5 ns	24 Amp	Counters	1.27 mm	85 Cel	UP		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G16		5.5 V	2.05 mm	5.275 mm	Not Qualified	4.5 V			e4		260	10.2 mm	ACT
74VHC393SJX	Onsemi	BINARY COUNTER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	4	YES		3.3			SMALL OUTLINE		ASYNCHRONOUS	19 ns				85 Cel	UP		NEGATIVE EDGE	-40 Cel		DUAL	105 MHz	R-PDSO-G14		5.5 V				2 V							AHC/VHC/H/U/V

Digital Counters

Digital counters are electronic circuits that can be used to count and keep track of the number of events or occurrences in a digital system. They are commonly used in digital systems to generate timing signals, to control sequencing, and to implement digital control functions.

Digital counters can be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs). They can also be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops.

Digital counters can be classified into two main types: synchronous counters and asynchronous counters. Synchronous counters use a common clock signal to synchronize the operation of all the flip-flops in the counter. Asynchronous counters, on the other hand, do not use a common clock signal and rely on the propagation delay of the flip-flops to sequence their operation.

Digital counters can also be classified based on their counting sequence. They can count up, down, or both up and down, depending on the application. Up counters increment the count each time an input pulse is received, while down counters decrement the count each time an input pulse is received. Up-down counters can count both up and down, depending on the direction of the input signal.

Digital counters can be used in various applications, including frequency division, time delay generation, event counting, and sequence control. They can be used to generate timing signals for clocking digital circuits, to control the sequencing of operations in a digital system, and to implement digital control functions, such as shift registers and sequence generators.