PARALLEL IN PARALLEL OUT Digital Shift Registers 1,498

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SNJ54ALS299W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	YES	1	17000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	50 pF	FLATPACK	FL20,.3	25 ns	24 Amp	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	17 MHz	R-GDFP-F20	5.5 V	2.54 mm	6.92 mm	Not Qualified	TRUE	4.5 V	40 mA	COMMON I/O PINS; GATED OUTPUT ENABLE INPUT	e0	NOT SPECIFIED	NOT SPECIFIED	13.09 mm	ALS
SN54AS195J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5			IN-LINE					2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL		R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT				19.56 mm	AS
SNJ5495AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	MIL-PRF-38535	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDIP-T14	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SN54ALS299J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		50 pF	IN-LINE		25 ns			2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.195 mm	ALS
8302102RA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	17000000 Hz	TTL	MIL-STD-883	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	25 ns	24 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	17 MHz	R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Qualified	TRUE	4.5 V	40 mA	COMMON I/O PINS; GATED OUTPUT ENABLE INPUT	e0			24.195 mm	ALS
74F194SC	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5			SMALL OUTLINE		8 ns			1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	90 MHz	R-PDSO-G16	5.5 V	1.753 mm	3.899 mm		TRUE	4.5 V						9.902 mm	F/FAST
CD54ACT323H	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD			UNSPECIFIED	UNSPECIFIED		YES	1		CMOS		8		5			UNCASED CHIP		12.9 ns				125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		UPPER	90 MHz	X-XUUC-N	5.5 V			Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL					ACT
SNJ54L95T-17	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		50 pF	FLATPACK		200 ns				125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	5 MHz	R-GDFP-F14	5.5 V			Not Qualified	TRUE	4.5 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD					TTL/H/L
DM54L95W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5			FLATPACK		90 ns			1.27 mm	125 Cel	BIDIRECTIONAL		NEGATIVE EDGE	-55 Cel		DUAL	6 MHz	R-GDFP-F14	5.5 V	2.032 mm	6.2865 mm		TRUE	4.5 V		LG-MAX; SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				9.779 mm	TTL/H/L
SNJ54AS323FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL	38535Q/M;38534H;883B	8		5		50 pF	CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	AS
8302101RA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	17000000 Hz	TTL	MIL-STD-883	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	25 ns	24 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	17 MHz	R-GDIP-T20	5.5 V	5.08 mm	6.92 mm	Qualified	TRUE	4.5 V	40 mA	COMMON I/O PINS; GATED OUTPUT ENABLE INPUT	e0			24.2 mm	ALS
SN54LS195AW-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		26 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	39 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				10.2 mm	LS
SN54HC299FK-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		CMOS		8		5		50 pF	CHIP CARRIER		57 ns			1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	21 MHz	S-CQCC-N20	6 V	2.03 mm	8.89 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				8.89 mm	HC/UH
SNJ5496J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		5		5		15 pF	IN-LINE		40 ns			2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	10 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	68 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				19.56 mm	TTL/H/L
SNJ54AS194W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-PRF-38535	4		5			FLATPACK		8 ns			1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	75 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V		SIPO OPERATION ALSO AVAILABLE				10.16 mm	AS
M38510/30601BEA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	20000000 Hz	TTL	MIL-PRF-38535 Class B	4	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	47 ns	8 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	25 MHz	R-GDIP-T16	5.25 V	5.08 mm	6.92 mm	Qualified	TRUE	4.75 V	63 mA		e0			19.56 mm	LS
7802401SX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5			FLATPACK		39 ns			1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDFP-F20	5.5 V	2.54 mm	6.92 mm	Qualified	TRUE	4.5 V				NOT APPLICABLE	NOT APPLICABLE	13.09 mm	LS
SN54S194W-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		16.5 ns			1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	105 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	110 mA	HOLD MODE				10.2 mm	S
54F322FM	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1	50000000 Hz	TTL		8		5	5	50 pF	FLATPACK	FL20,.3	10 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE		-55 Cel	TIN LEAD	DUAL	50 MHz	R-GDFP-F20	5.5 V	2.286 mm	6.731 mm	Not Qualified	TRUE	4.5 V	90 mA	COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT	e0				F/FAST
SN54AS95FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		4		5		50 pF	CHIP CARRIER	LCC20,.35SQ	10.5 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		QUAD	80 MHz	S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	39 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	AS
54ACT11194FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1	100000000 Hz	CMOS		4		5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	9.6 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		QUAD	130 MHz	S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	ACT
SN54179W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5	5	15 pF	FLATPACK	FL16,.3	35 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	70 mA	HOLD MODE; COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	TTL/H/L
SN54LS395AW-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		45 pF	FLATPACK		30 ns			1.27 mm	125 Cel	RIGHT	3-STATE	NEGATIVE EDGE	-55 Cel		DUAL	45 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				10.2 mm	LS
SNJ54199W-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	24	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		15 pF	FLATPACK		30 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	35 MHz	R-GDFP-F24	5.5 V	2.29 mm	9.09 mm	Not Qualified	TRUE	4.5 V	127 mA	CLOCK INHIBIT				14.36 mm	TTL/H/L
SN54LS395AJ-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		45 pF	IN-LINE		30 ns			2.54 mm	125 Cel	RIGHT	3-STATE	NEGATIVE EDGE	-55 Cel		DUAL	45 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				19.56 mm	LS
SNJ54LS323J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		45 pF	IN-LINE		25 ns			2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	50 MHz	R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	60 mA	HOLD MODE				24.195 mm	LS
SN54AS194J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		50 pF	IN-LINE	DIP16,.3	8 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	75 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	60 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	AS
SN54L95T-12	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		50 pF	FLATPACK		200 ns				125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	5 MHz	R-GDFP-F14	5.5 V			Not Qualified	TRUE	4.5 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD					TTL/H/L
SN54178W-10	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		35 ns			1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	39 MHz	R-GDFP-F14	5.5 V	2.03 mm	6.29 mm	Not Qualified	TRUE	4.5 V	70 mA	HOLD MODE				9.21 mm	TTL/H/L
74ACT11194N	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		4		5	5	50 pF	IN-LINE	DIP20,.3	8.8 ns		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; CENTER VCC/GND PINS		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ACT
SNJ5496W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-PRF-38535	5		5	5	15 pF	FLATPACK	FL16,.3	40 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	10 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	68 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	10.16 mm	TTL/H/L
SNJ54S194J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	NO	1	70000000 Hz	TTL	MIL-PRF-38535	4	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	16.5 ns	20 Amp	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	70 MHz	R-CDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	135 mA	HOLD MODE	e0			19.56 mm	S
M38510/30601B2X	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL	MIL-M-38510 Class B	4		5			CHIP CARRIER		47 ns				125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		QUAD	20 MHz	S-CQCC-N20	5.5 V			Qualified	TRUE	4.5 V							LS
SNJ54178J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		NO	1		TTL	38535Q/M;38534H;883B	4		5		15 pF	IN-LINE	DIP14,.3	35 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	25 MHz	R-CDIP-T14	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	70 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SN54F299FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1	65000000 Hz	TTL		8		5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	12.5 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	65 MHz	S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	F/FAST
DM54L95J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5			IN-LINE		90 ns			2.54 mm	125 Cel	BIDIRECTIONAL		NEGATIVE EDGE	-55 Cel		DUAL	6 MHz	R-GDIP-T14	5.5 V	5.08 mm	7.62 mm		TRUE	4.5 V		LG-MAX; SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.939 mm	TTL/H/L
CD54ACT323F3A	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	90000000 Hz	CMOS		8		5	5		IN-LINE	DIP20,.3	14.5 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	90 MHz	R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	ACT
78024012X	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		8		5			CHIP CARRIER		39 ns			1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	20 MHz	S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Qualified	TRUE	4.5 V				NOT APPLICABLE	NOT APPLICABLE	8.89 mm	LS
SNJ54LS395AW	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL	MIL-PRF-38535	4		5	5	45 pF	FLATPACK	FL16,.3	30 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	NEGATIVE EDGE	-55 Cel		DUAL	30 MHz	R-CDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SN54198W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	24	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		8		5		15 pF	FLATPACK	FL24,.4	30 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-CDFP-F24	5.5 V	2.29 mm	9.09 mm	Not Qualified	TRUE	4.5 V	127 mA	HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK		NOT SPECIFIED	NOT SPECIFIED	14.36 mm	TTL/H/L
SN54AS95J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5			IN-LINE					2.54 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL		R-GDIP-T14	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.56 mm	AS
SN54195J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		NO	1	30000000 Hz	TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	26 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	30 MHz	R-CDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	63 mA	EXTERNAL CLOCK GATED MASTER RESET AND USED AS SHIFT CLOCK		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SNJ54LS295BW-10	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		45 pF	FLATPACK		30 ns			1.27 mm	125 Cel	RIGHT	3-STATE	NEGATIVE EDGE	-55 Cel		DUAL	45 MHz	R-GDFP-F14	5.5 V	2.03 mm	6.29 mm	Not Qualified	TRUE	4.5 V	29 mA					9.21 mm	LS
SNJ54LS299FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	NO	YES	1	20000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	15 pF	CHIP CARRIER	LCC20,.35SQ	39 ns	24 Amp	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	25 MHz	S-CQCC-N20	5.25 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE	e0			8.89 mm	LS
SN54S195W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		YES	1	70000000 Hz	TTL		4		5	5	15 pF	FLATPACK	FL16,.3	16.5 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	70 MHz	R-CDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	99 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	S
SN54AS194FH-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		4		5			CHIP CARRIER					1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20	5.5 V	2.54 mm	8.89 mm	Not Qualified	TRUE	4.5 V		HOLD MODE				8.89 mm	AS
SN54LS195AW	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		YES	1	30000000 Hz	TTL		4		5	5	15 pF	FLATPACK	FL16,.3	26 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	30 MHz	R-CDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SNJ54AS299J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	38535Q/M;38534H;883B	8		5		50 pF	IN-LINE	DIP20,.3			Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.19 mm	AS

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.