PARALLEL IN PARALLEL OUT Digital Shift Registers 1,498

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
5962-3830602BEX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5			IN-LINE		47 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDIP-T16		5.5 V			Not Qualified	TRUE	4.5 V							LS
M38510/30601SEA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	MIL-PRF-38535 Class S	4		5			IN-LINE		47 ns				125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDIP-T16		5.5 V			Not Qualified	TRUE	4.5 V							LS
SN54S194W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		YES	1	70000000 Hz	TTL		4		5	5	15 pF	FLATPACK	FL16,.3	16.5 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	70 MHz	R-CDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	135 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	S
CD54AC299F3A	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	95000000 Hz	CMOS		8	TUBE	3.3	1.5/5.5	50 pF	IN-LINE	DIP20,.3	169 ns	24 Amp	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	95 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	1.5 V	.16 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0			19.56 mm	AC
SN54ALS299FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		8		5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	25 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	17 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	ALS
74F194SJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	90000000 Hz	TTL		4		5	5	50 pF	SMALL OUTLINE	SOP16,.3	8 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	90 MHz	R-PDSO-G16		5.5 V	2.1 mm	5.3 mm	Not Qualified	TRUE	4.5 V	46 mA	HOLD MODE	e0			10.2 mm	F/FAST
SNJ54LS194AW-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		26 ns			1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	23 mA	HOLD MODE				10.2 mm	LS
SNJ54L95T-12	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		50 pF	FLATPACK		200 ns				125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	5 MHz	R-GDFP-F14		5.5 V			Not Qualified	TRUE	4.5 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD					TTL/H/L
M38510/30602SEX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5			IN-LINE		47 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDIP-T16		5.5 V			Not Qualified	TRUE	4.5 V							LS
M38510/30601BFA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	YES	1	20000000 Hz	TTL	MIL-PRF-38535 Class B	4	TUBE	5	5	15 pF	FLATPACK	FL16,.3	47 ns	8 Amp	Shift Register	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	25 MHz	R-GDFP-F16		5.25 V	2.03 mm	6.73 mm	Qualified	TRUE	4.75 V	63 mA		e0	NOT SPECIFIED	NOT SPECIFIED	10.3 mm	LS
SN54L95T-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		50 pF	FLATPACK		200 ns				125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	5 MHz	R-GDFP-F14		5.5 V			Not Qualified	TRUE	4.5 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD					TTL/H/L
SNJ5496J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	MIL-PRF-38535	5		5	5	15 pF	IN-LINE	DIP16,.3	40 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	10 MHz	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	68 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SN5496W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		YES	1	10000000 Hz	TTL		5		5	5	15 pF	FLATPACK	FL16,.3	40 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL		R-CDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	68 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	TTL/H/L
SN54S195W-10	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		16.5 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	105 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	99 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				10.2 mm	S
54F322DM	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	50000000 Hz	TTL		8		5	5	50 pF	IN-LINE	DIP20,.3	10 ns		Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE		-55 Cel	TIN LEAD	DUAL	50 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	90 mA	COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT	e0			24.51 mm	F/FAST
SN54LS671FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		4		5		15 pF	CHIP CARRIER	LCC20,.35SQ	25 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	LS
SNJ54ALS964FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL	38535Q/M;38534H;883B	8		5		50 pF	CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	30 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; DUAL RANK SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	ALS
SN54F299J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	65000000 Hz	TTL		8		5	5	50 pF	IN-LINE	DIP20,.3	12.5 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	65 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	F/FAST
SN54199J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		15 pF	IN-LINE		30 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	35 MHz	R-GDIP-T24		5.5 V			Not Qualified	TRUE	4.5 V	127 mA	CLOCK INHIBIT					TTL/H/L
8302102SX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-STD-883	8		5			FLATPACK		25 ns			1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	17 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Qualified	TRUE	4.5 V				NOT APPLICABLE	NOT APPLICABLE	13.09 mm	ALS
JM38510/00901BDB	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		32 ns			1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F14		5.5 V	2.03 mm	6.29 mm	Not Qualified	TRUE	4.5 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				9.21 mm	TTL/H/L
5962-8682601EA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	20000000 Hz	CMOS	MIL-STD-883	4	TUBE	4.5	2/6	50 pF	IN-LINE	DIP16,.3	265 ns	5.2 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	60 MHz	R-GDIP-T16		6 V	5.08 mm	7.62 mm	Qualified	TRUE	2 V	.16 mA	HOLD MODE	e0			19.56 mm	HC
SNJ54194W-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		26 ns			1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	63 mA	HOLD MODE				10.2 mm	TTL/H/L
8101701EA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	2000000 Hz	CMOS	MIL-STD-883	4	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	500 ns	4.2 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	8 MHz	R-GDIP-T16		18 V	5.08 mm	7.62 mm	Qualified	CONFIGURABLE	3 V	3 mA	J AND K BAR SERIAL INPUT	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	4000/14000/40000
SN54AS95J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		50 pF	IN-LINE	DIP14,.3	10.5 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	80 MHz	R-GDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	39 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	AS
SNJ54LS96FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		5		5		15 pF	CHIP CARRIER		40 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	20 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				8.89 mm	LS
M38510/30607BFX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5			FLATPACK		56 ns				125 Cel	RIGHT	3-STATE	NEGATIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDFP-F16		5.5 V			Not Qualified	TRUE	4.5 V							LS
SNJ54ALS323J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	17000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	25 ns	24 Amp	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	17 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	40 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0			24.195 mm	ALS
SN74ALS963DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; DUAL RANK SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74LS95BN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.305 mm	LS
CD4035BM	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	2000000 Hz	CMOS		4	TUBE	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	500 ns	4.2 Amp	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	CONFIGURABLE	3 V	3 mA	J AND K BAR SERIAL INPUT	e4	NOT SPECIFIED	260	9.9 mm	4000/14000/40000
SN74LS672DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5		15 pF	SMALL OUTLINE		25 ns			1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS				12.8 mm	LS
SN74198J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		15 pF	IN-LINE		30 ns				70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-GDIP-T24		5.25 V			Not Qualified	TRUE	4.75 V	127 mA	HOLD MODE					TTL/H/L
SN74AS194DR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	80000000 Hz	TTL		4	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	7 ns	20 Amp	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	53 mA	HOLD MODE	e4	30	260	9.9 mm	AS
SN74ALS964DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; DUAL RANK SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
CD74ACT323M	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	90000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP20,.4	11.7 ns		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	103 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL				12.8 mm	ACT
CD40194BD	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		NO	1	3000000 Hz	CMOS		4		5	5/15		IN-LINE	DIP16,.3	440 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-CDIP-T16		18 V			Not Qualified	TRUE	3 V		HOLD MODE		NOT SPECIFIED	NOT SPECIFIED		4000/14000/40000
SN74LS195AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	30000000 Hz	TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	26 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
CD4034BM	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	2000000 Hz	CMOS		8	TUBE	5	5/15	50 pF	SMALL OUTLINE	SOP24,.4	700 ns	4.2 Amp	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G24	1	18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	3 mA	COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE	e4	30	260	15.4 mm	4000/14000/40000
SN74LS671DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5		15 pF	SMALL OUTLINE	SOP20,.4	25 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74ALS963DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE					1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; DUAL RANK SHIFT REGISTER				12.8 mm	ALS
SN74F323N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	70000000 Hz	TTL		8		5	5	50 pF	IN-LINE	DIP20,.3	12 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	F/FAST
SN74LS299N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5		45 pF	IN-LINE		25 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	60 mA	HOLD MODE				24.325 mm	LS
CD74HC194ME4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	9.9 mm	HC/UH
SN74L99J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		50 pF	IN-LINE		200 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	5 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.56 mm	TTL/H/L
CD74HCT299E	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	16000000 Hz	CMOS		8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	68 ns	4 Amp	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	16 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	.16 mA	COMMON I/O PINS; GATED OUTPUT CONTROL	e4	NOT APPLICABLE	NOT APPLICABLE	25.4 mm	HCT
SN74LS299J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		45 pF	IN-LINE		25 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	60 mA	HOLD MODE				24.195 mm	LS
CD4035BE	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	2000000 Hz	CMOS		4	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	500 ns	4.2 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	8 MHz	R-PDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	CONFIGURABLE	3 V	3 mA	J AND K BAR SERIAL INPUT	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	4000/14000/40000

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.