PARALLEL IN PARALLEL OUT Digital Shift Registers 1,498

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CD74HC195PWTG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	4		4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	5 mm	HC/UH
SN74S194FN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	16.5 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		QUAD	70 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	135 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
CD4035BPWG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS	4		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
SN74179N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	39 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE				19.305 mm	TTL/H/L
CD74AC323MG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	68000000 Hz	CMOS	8		3.3	3.3/5		SMALL OUTLINE	SOP20,.4	169 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	95 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	AC
SN74L96J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	5		5		15 pF	IN-LINE		80 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	5 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	40 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				19.56 mm	TTL/H/L
CD74HC194PWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	4		4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	5 mm	HC/UH
SN74194N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		26 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	HOLD MODE				19.305 mm	TTL/H/L
SN74L96N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	5		5		15 pF	IN-LINE		80 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	5 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	40 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				19.305 mm	TTL/H/L
SN74LS295BN-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		45 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	45 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	29 mA					19.305 mm	LS
SN74LS299N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	20000000 Hz	TTL	8	TUBE	5	5	15 pF	IN-LINE	DIP20,.3	39 ns	24 Amp	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDIP-T20	1	5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS	e4	NOT SPECIFIED	260	25.4 mm	LS
CD4034BPWE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS	8		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	700 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	7 MHz	R-PDSO-G24		18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V		COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	7.8 mm	4000/14000/40000
SN74ALS299FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5		50 pF	CHIP CARRIER		19 ns			1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				8.9662 mm	ALS
SN74LS672FN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5		15 pF	CHIP CARRIER	LDCC20,.4SQ	25 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
CD74HC299ME4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	8		4.5	2/6		SMALL OUTLINE	SOP20,.4	300 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMMON I/O PINS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	HC/UH
SN74LS295BJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5	5	45 pF	IN-LINE	DIP14,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	30 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	29 mA			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74LS323DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
CD4035BPWR	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	2000000 Hz	CMOS	4	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns	4.2 Amp	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	CONFIGURABLE	3 V	3 mA	J AND K BAR SERIAL INPUT	e4	NOT SPECIFIED	260	5 mm	4000/14000/40000
SN74198N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	127 mA	HOLD MODE				31.75 mm	TTL/H/L
SN74LS194AN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	25000000 Hz	TTL	4	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	26 ns	8 Amp	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDIP-T16	1	5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	23 mA	HOLD MODE	e4	NOT SPECIFIED	260	19.305 mm	LS
SN74199N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	127 mA	CLOCK INHIBIT				31.75 mm	TTL/H/L
SN74HC194DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	4		5			SMALL OUTLINE		180 ns			1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		HOLD MODE				10.3 mm	HC/UH
SN74LS194ADG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL	4		5	5		SMALL OUTLINE	SOP16,.25	26 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		HOLD MODE	e4	30	260	9.9 mm	LS
SN74LS299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL	8	TUBE	5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS	e4	30	260	12.8 mm	LS
SN74178J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	39 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE				19.56 mm	TTL/H/L
SN74S299J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	50000000 Hz	TTL	8		5	5	45 pF	IN-LINE	DIP20,.3	21 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	S
SN74LS671J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE	DIP20,.3	25 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
CD74HC194MG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	9.9 mm	HC/UH
SN74AS299N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	23.995 mm	AS
SN74LS395ADR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5	5	45 pF	SMALL OUTLINE	SOP16,.25	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74ALS323N3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3	19 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	17 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		COMMON I/O PINS; GATED OUTPUT ENABLE INPUT		NOT SPECIFIED	NOT SPECIFIED	25.4 mm	ALS
CD74HC195EE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	20000000 Hz	CMOS	4	TUBE	4.5	2/6	50 pF	IN-LINE	DIP16,.3	265 ns	5.2 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V	.16 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74AS95D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5		50 pF	SMALL OUTLINE	SOP14,.25	9.5 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	100 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.905 mm	Not Qualified	TRUE	4.5 V	39 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	8.645 mm	AS
SN74F299NE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	70000000 Hz	TTL	8		5	5		IN-LINE	DIP20,.3	12 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e4			25.4 mm	F/FAST
SN74LS299DWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
CD74HC195NSR	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS	4	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	265 ns	5.2 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.16 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	10.2 mm	HC
SN74199N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5	15 pF	IN-LINE	DIP24,.6	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	127 mA	CLOCK INHIBIT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	31.75 mm	TTL/H/L
SN74S194N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		16.5 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	105 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	135 mA	HOLD MODE				19.305 mm	S
CD74HCT194EE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	18000000 Hz	CMOS	4		5	5		IN-LINE	DIP16,.3	56 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE	e4			19.305 mm	HCT
SN74S299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	21 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	S
SN74AS299FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5			CHIP CARRIER					1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				8.9662 mm	AS
SN74LS395AFN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5	5	45 pF	CHIP CARRIER	LDCC20,.4SQ	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74LS395AN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5	45 pF	IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	30 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
CD4034BNSRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS	8		5	5/15		SMALL OUTLINE	SOP24,.3	700 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	7 MHz	R-PDSO-G24		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	15 mm	4000/14000/40000
SN74HC299N	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	CMOS	8		5	2/6		IN-LINE	DIP20,.3	288 ns		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDIP-T20		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		COMMON I/O PINS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	HC/UH
SN74HC299DWR-00	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		48 ns			1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				12.8 mm	HC/UH
SN74S194D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5	5	15 pF	SMALL OUTLINE	SOP16,.25	16.5 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	135 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	S
SN74HC195DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	4		5	2/6		SMALL OUTLINE	SOP16,.4	180 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	HC/UH

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.