PARALLEL IN PARALLEL OUT Digital Shift Registers 1,498

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74199N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	127 mA	CLOCK INHIBIT				31.75 mm	TTL/H/L
SN74HC194DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	4		5			SMALL OUTLINE		180 ns			1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		HOLD MODE				10.3 mm	HC/UH
SN74LS194ADG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL	4		5	5		SMALL OUTLINE	SOP16,.25	26 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		HOLD MODE	e4	30	260	9.9 mm	LS
SN74LS299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL	8	TUBE	5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS	e4	30	260	12.8 mm	LS
SN74178J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	39 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE				19.56 mm	TTL/H/L
SN74S299J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	50000000 Hz	TTL	8		5	5	45 pF	IN-LINE	DIP20,.3	21 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	S
SN74LS671J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE	DIP20,.3	25 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
CD74HC194MG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	9.9 mm	HC/UH
SN74AS299N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	23.995 mm	AS
SN74LS395ADR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5	5	45 pF	SMALL OUTLINE	SOP16,.25	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74194N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		26 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	HOLD MODE				19.305 mm	TTL/H/L
SN74S299N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		45 pF	IN-LINE		21 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE				24.325 mm	S
SN74L99N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		50 pF	IN-LINE		200 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	5 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.305 mm	TTL/H/L
SN74LS299N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		45 pF	IN-LINE		25 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	60 mA	HOLD MODE				24.325 mm	LS
SN74AS299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5		50 pF	SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AS
CD74HC194PW	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS	4	TUBE	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	5.2 Amp	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.16 mA	HOLD MODE	e4	30	260	5 mm	HC
SN74LS322AN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	20000000 Hz	TTL	8		5	5	15 pF	IN-LINE	DIP20,.3	35 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	60 mA	COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	LS
SN74AS299N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5			IN-LINE					2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.325 mm	AS
SN74ALS323N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE		19 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.325 mm	ALS
SN74LS671FN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5		15 pF	CHIP CARRIER	LDCC20,.4SQ	25 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74195N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		26 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	39 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				19.305 mm	TTL/H/L
SN74S299FN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5	5	45 pF	CHIP CARRIER	LDCC20,.4SQ	21 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD	50 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
SN74LS295BN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		45 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	45 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	29 mA					19.305 mm	LS
SN74ALS323N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	17000000 Hz	TTL	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	19 ns	24 Amp	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	40 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4			24.325 mm	ALS
CD40194BPWG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS	4		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	440 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
SN74S194J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		16.5 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	105 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	135 mA	HOLD MODE				19.56 mm	S
SN74LS299FN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD	20 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC195DW	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	4		5	2/6		SMALL OUTLINE	SOP16,.4	180 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	HC/UH
SN74HC299DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		5			SMALL OUTLINE		288 ns			1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMMON I/O PINS; GATED OUTPUT CONTROL				12.8 mm	HC/UH
SN74LS95BJ-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.56 mm	LS
SN74F299DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	70000000 Hz	TTL	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	F/FAST
CD40194BPWRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS	4		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	440 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
CD4035BME4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS	4		5	5/15		SMALL OUTLINE	SOP16,.25	500 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT	e4	30	260	9.9 mm	4000/14000/40000
CD40194BNSRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS	4		5	5/15		SMALL OUTLINE	SOP16,.3	440 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74ALS963NT	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE						70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDIP-T20		5.5 V			Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; DUAL RANK SHIFT REGISTER					ALS
SN74LS323N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		45 pF	IN-LINE		25 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	60 mA	HOLD MODE				24.325 mm	LS
SN74L95N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		50 pF	IN-LINE		200 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	5 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.305 mm	TTL/H/L
SN74AS323DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5		50 pF	SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AS
SN74LS299D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	SMALL OUTLINE	SO(UNSPEC)	39 ns		Shift Registers		70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G20		5.25 V			Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED		LS
SN74ALS299NSR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE	SOP20,.3	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		COMMON I/O PINS; GATED OUTPUT ENABLE INPUT		NOT SPECIFIED	NOT SPECIFIED	12.6 mm	ALS
SN74LS194ADR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL	4		5	5	15 pF	SMALL OUTLINE	SOP16,.25	26 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	23 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74178N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	39 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE				19.305 mm	TTL/H/L
SN74178N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE	DIP14,.3	35 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74LS299DWRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		HOLD MODE; COMMON I/O PINS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74198J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5		15 pF	IN-LINE	DIP24,.6	30 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-GDIP-T24		5.25 V			Not Qualified	TRUE	4.75 V	127 mA	HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK		NOT SPECIFIED	NOT SPECIFIED		TTL/H/L
CD74HC194MTE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	9.9 mm	HC/UH
SN74F323DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	F/FAST
SN7496N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	10000000 Hz	TTL	5		5	5	15 pF	IN-LINE	DIP16,.3	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	10 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	79 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.