PARALLEL IN PARALLEL OUT Digital Shift Registers 1,498

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74F299NSRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	TTL	8	5	5		SMALL OUTLINE	SOP20,.3	12 ns	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.6 mm	F/FAST
CD4035BPWE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	4	5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
SN74LS95BN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	25000000 Hz	TTL	4	5	5	15 pF	IN-LINE	DIP14,.3	32 ns	Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
CD74HC194PWRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	4	4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	5 mm	HC/UH
SN74HC194N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4	5		50 pF	IN-LINE		36 ns		2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		HOLD MODE				19.305 mm	HC/UH
CD74HC195PWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	4	4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	5 mm	HC/UH
SN74195J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL	4	5		15 pF	IN-LINE		26 ns		2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	39 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				19.56 mm	TTL/H/L
SN74LS295BFN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5	5	45 pF	CHIP CARRIER	LDCC20,.4SQ	30 ns	Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	29 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
CD4034BME4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	8	5	5/15		SMALL OUTLINE	SOP24,.4	700 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G24	1	18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE	e4	30	260	15.4 mm	4000/14000/40000
CD40194BPW	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000 Hz	CMOS	4	5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	440 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
SN7495AN3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4	5	5	15 pF	IN-LINE	DIP14,.3	32 ns	Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74LS194AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	25000000 Hz	TTL	4	5	5	15 pF	IN-LINE	DIP16,.3	26 ns	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	23 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN7495AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	25000000 Hz	TTL	4	5	5	15 pF	IN-LINE	DIP14,.3	32 ns	Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT AND LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	7495
SN74HC299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	8	5	2/6		SMALL OUTLINE	SOP20,.4	288 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMMON I/O PINS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	HC/UH
SN74AS194FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5			CHIP CARRIER				1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		HOLD MODE				8.9662 mm	AS
SN74LS195J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL	4	5		15 pF	IN-LINE		26 ns		2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	39 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				19.56 mm	LS
CD74HC194PWTG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	4	4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	5 mm	HC/UH
SN7495N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4	5	5		IN-LINE	DIP14,.3	35 ns	Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T14			5.08 mm	7.62 mm	Not Qualified	TRUE					NOT SPECIFIED	NOT SPECIFIED	19.305 mm	74
SN74LS299N3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8	5	5	15 pF	IN-LINE	DIP20,.3	39 ns	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	LS
SN7495AN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4	5		15 pF	IN-LINE		32 ns		2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.305 mm	TTL/H/L
SN74LS395AN-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4	5		45 pF	IN-LINE		30 ns		2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	45 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				19.305 mm	LS
SN74LS95BD	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	4	5	5	15 pF	SMALL OUTLINE	SOP14,.25	32 ns	Shift Registers	1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	LS
CD4035BMT	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	4	5	5/15		SMALL OUTLINE	SOP16,.25	500 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT	e4	30	260	9.9 mm	4000/14000/40000
SN74ALS299N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8	5		50 pF	IN-LINE		19 ns		2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.325 mm	ALS
SN74AS194N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4	5		50 pF	IN-LINE	DIP16,.3	7 ns	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	53 mA	HOLD MODE	e4			19.305 mm	AS
CD40194BF	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	3000000 Hz	CMOS	4	5	5/15		IN-LINE	DIP16,.3	440 ns	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-GDIP-T16		18 V			Not Qualified	TRUE	3 V		HOLD MODE		NOT SPECIFIED	NOT SPECIFIED		4000/14000/40000
SN74S299DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8	5	5	45 pF	SMALL OUTLINE	SOP20,.4	21 ns	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	S
SN74AS195D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	4	5		50 pF	SMALL OUTLINE	SOP16,.25	10.5 ns	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	57 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
CD4035BD	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	1	8000000 Hz	CMOS	4	5	5/15		IN-LINE	DIP16,.3	500 ns	Shift Registers	2.54 mm	125 Cel	RIGHT			-55 Cel		DUAL	8 MHz	R-CDIP-T16		18 V			Not Qualified	CONFIGURABLE	3 V		J AND KBAR SERIAL INPUT					4000/14000/40000
SN74LS323FN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	39 ns	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD	25 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
CD74HC194PWG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	4	4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	5 mm	HC/UH
SN74LS395AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL	4	5	5	45 pF	IN-LINE	DIP16,.3	30 ns	Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
CD74HC194NSRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	4	4.5	2/6		SMALL OUTLINE	SOP16,.3	265 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	23 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	HC/UH
SN74179N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4	5		15 pF	IN-LINE		35 ns		2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	39 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE				19.305 mm	TTL/H/L
CD4035BPW	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	4	5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
MC100EP142FAR2	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	100E
MC100E141FN	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	100E
MC10H141FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	4				CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20	3		4.57 mm	8.965 mm	Not Qualified	TRUE				e3	30	260	8.965 mm	10H
MC10E141FNG	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	10E
MC10E241FN	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	10E
MC10EP142FAR2G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3		260	7 mm	10E
MC100EP142FAR2G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	7 mm	100E
MC100E241FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	MILITARY	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	-55 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC100E141FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC100E142FNR2	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	9	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	100E
MC100E241FNG	Onsemi	PARALLEL IN PARALLEL OUT	MILITARY	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	-55 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC10141L	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	150000000 Hz	ECL	4		-5.2		IN-LINE	DIP16,.3	3.8 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-30 Cel	TIN LEAD	DUAL	150 MHz	R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	TRUE				e0			19.49 mm	10K
MC10E141FN	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	10E

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.