SERIAL IN PARALLEL OUT Digital Shift Registers 2,135

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
935273733115	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		63 ns		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		QUAD	20 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm		TRUE	4.5 V	SERIAL STANDARD OUTPUT FOR CASCADING				3.5 mm	HCT
933406640652	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5			IN-LINE		330 ns		2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	14 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V		e4			21.6 mm	4000/14000/40000
935282471118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		18.2 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm		TRUE	1.2 V		e4			5 mm	LVC/LCX/Z
935265463118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		14 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	65 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4			8.65 mm	AHCT/VHCT
933714070653	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	4.5			SMALL OUTLINE		255 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e4			8.65 mm	HC/UH
935043390112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		48 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			9.9 mm	HCT
935009180118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		63 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4			9.9 mm	HCT
I74F164D,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	80000000 Hz	TTL		8	5	5		SMALL OUTLINE	SOP14,.25	11 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4	30	260	8.65 mm	F/FAST
I74F164D	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	80000000 Hz	TTL		8	5	5		SMALL OUTLINE	SOP14,.25	11 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4	30	260	8.65 mm	F/FAST
I74F164D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8	5			SMALL OUTLINE		11 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4			8.65 mm	F/FAST
I74F164N	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	80000000 Hz	TTL		8	5	5		IN-LINE	DIP14,.3	11 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V		e4			19.025 mm	F/FAST
I74F164N,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	80000000 Hz	TTL		8	5	5		IN-LINE	DIP14,.3	11 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V		e4	30	260	19.025 mm	F/FAST
I74F164D,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	80000000 Hz	TTL		8	5	5		SMALL OUTLINE	SOP14,.25	11 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4			8.65 mm	F/FAST
74HCT595DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	63 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	SERIAL STANDARD OUTPUT FOR CASCADING	e4	30	260	6.2 mm	HCT
74AHC595D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		20.1 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm		TRUE	2 V					9.9 mm	AHC/VHC/H/U/V
74LV595PWDH-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		95 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	77 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				5 mm	LV/LV-A/LVX/H
74AHCT164D-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		14 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					8.65 mm	AHCT/VHCT/VT
74LV4094N	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	3.3	3.3	50 pF	IN-LINE	DIP16,.3	90 ns	Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		3.6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	1 V	SISO OPERATION ALSO AVAILABLE	e4			19.025 mm	LV/LV-A/LVX/H
74LV4094PW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	90 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
74AHCT164BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		14 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	85 MHz	R-PQCC-N14		5.5 V	1 mm	2.5 mm		TRUE	4.5 V					3 mm	AHCT/VHCT/VT
74HCT4015D,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		4	5	5	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260		HCT
74HCT4094DB,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	65 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	UNLATCHED SERIAL SHIFT RIGHT OUTPUT; PARALLEL OUTPUT IS LATCHED	e4	30	260	6.2 mm	HCT
74AHCT594BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	70 MHz	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm		TRUE	4.5 V					3.5 mm	AHCT/VHCT/VT
74AHC595PW,653	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20.1 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	AHC/VHC/H/U/V
74LV595PW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	77 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	5 mm	LV/LV-A/LVX/H
74HC164DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	255 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HC/UH
74LV164PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	49 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		e4	30	260	5 mm	LV/LV-A/LVX/H
74HC4015PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER				5 mm	HC/UH
74HC4015DB,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		4	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	53 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260	6.2 mm	HC/UH
74HCT164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		54 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					8.65 mm	HCT
74HC164DB,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	255 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HC/UH
74HC595D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		240 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V		e4			9.9 mm	HC/UH
74LV595D,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	77 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	9.9 mm	LV/LV-A/LVX/H
74HCT164D	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE	SOP14,.25	54 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4	30	260	8.65 mm	HCT
74AHCT164BQ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	14 ns	Shift Registers	.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	85 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V		e4	30	260	3 mm	AHCT/VHCT/VT
74AHCT595PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	AHCT/VHCT/VT
74HC4015D,653	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		4	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V			Not Qualified	TRUE	2 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260		HC/UH
HEF4015BT-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE		260 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4			9.9 mm	4000/14000/40000
74AHC164BQ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	35000000 Hz	CMOS		8	5	2/5.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	20.5 ns	Shift Registers	.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	85 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V		e4	30	260	3 mm	AHC/VHC/H/U/V
74LVC594AD-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	3.3			SMALL OUTLINE		18.2 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm		TRUE	1.65 V					9.9 mm	LVC/LCX/Z
74AHCT594DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			30	260	6.2 mm	HCT
74HCT595BQ-Q100,11	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	AEC-Q100	8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	63 ns	Shift Registers	.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		QUAD	20 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V					3.5 mm	HCT
74HCT4094NB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5		50 pF	IN-LINE		65 ns		2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN/NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.5 V	4.06 mm	7.62 mm	Not Qualified	TRUE	4.5 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e3/e4			19.09 mm	HCT
74AHCT164PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	14 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	AHCT/VHCT/VT
74HC595DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		265 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	SERIAL STANDARD OUTPUT FOR CASCADING	e4			6.2 mm	HC/UH
74AHC594PW-Q100,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		15.1 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	AHC/VHC/H/U/V
74HC164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		255 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14		6 V	1.75 mm	3.9 mm		TRUE	2 V					8.65 mm	HC/UH
74LV164BQ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	49 ns	Shift Registers	.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	30 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	1 V		e4	30	260	3 mm	LV/LV-A/LVX/H

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.