SERIAL IN PARALLEL OUT Digital Shift Registers 2,135

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74AHC594DB,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	2.5/5.5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HC/UH
74AHCT594DB,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HCT
74AHCT164PW,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	14 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	AHCT/VHCT/VT
74AHCT594PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	AHCT/VHCT/VT
74HC595DB-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, SHRINK PITCH		240 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm		TRUE	2 V					6.2 mm	HC/UH
74HCT595DB-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	AEC-Q100	8	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	63 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		e4	30	260	6.2 mm	HCT
74HCT4015DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER				6.2 mm	HCT
74HCT164PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	54 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	HCT
74LVC595APW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		8	3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.2 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	S-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V		e4	30	260	5 mm	LVC/LCX/Z
74LV4094PW,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	90 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
HEF4094BTS,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		330 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	14 MHz	R-PDSO-G16		15 V	2 mm	5.3 mm		TRUE	3 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e4			6.2 mm	4000/14000/40000
74LV595DB,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	77 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	6.2 mm	LV/LV-A/LVX/H
74AHC594D	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	2.5/5.5		SMALL OUTLINE	SOP16,.25	15.1 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			30	260	9.9 mm	HC/UH
74HCT594PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				5 mm	HCT
74HCT4094DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		65 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	UNLATCHED SERIAL SHIFT RIGHT OUTPUT; PARALLEL OUTPUT IS LATCHED	e4			6.2 mm	HCT
74HC594PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				5 mm	HC/UH
74HCT164D,652	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE	SOP14,.25	54 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4	30	260	8.65 mm	HCT
HEF4094BDB	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		8	5		50 pF	IN-LINE		330 ns		2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT					4000/14000/40000
NPIC6C4894D-Q100Y	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	5			SMALL OUTLINE				1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V					12.8 mm	NPIC
HEF4094BTT-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		330 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	14 MHz	R-PDSO-G16		15 V	1.1 mm	4.4 mm		TRUE	3 V					5 mm	4000/14000/40000
74LV164DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	49 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		e4	30	260	6.2 mm	LV/LV-A/LVX/H
74HC4094DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	295 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	UNLATCHED SERIAL SHIFT RIGHT OUTPUT; PARALLEL OUTPUT IS LATCHED	e4	30	260	6.2 mm	HC/UH
74AHC594DB-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, SHRINK PITCH		15.1 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm		TRUE	2 V					6.2 mm	AHC/VHC/H/U/V
74HCT164DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, SHRINK PITCH		54 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		e4			6.2 mm	HCT
74HCT164D-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS	AEC-Q100	8	5	5		SMALL OUTLINE	SOP14,.25	54 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V					8.65 mm	HCT
74HC595PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		240 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm		TRUE	2 V		e4			5 mm	HC/UH
74HC164BQ-Q100X	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8	5	2/6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	255 ns	Shift Registers	.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	24 MHz	R-PQCC-N14		6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V					3 mm	HC/UH
74AHCT594D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		11 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					9.9 mm	AHCT/VHCT/VT
74HCT164DB,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	54 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		e4	30	260	6.2 mm	HCT
HEF4015BDF	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS		4	5		50 pF	IN-LINE		260 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	7 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER					4000/14000/40000
74LV595D,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.25	77 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	9.9 mm	LV/LV-A/LVX/H
74HC4094DB-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, SHRINK PITCH		295 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm		TRUE	2 V					6.2 mm	HC/UH
74HC164DB,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	255 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HC/UH
NPIC6C4894D-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	5			SMALL OUTLINE				1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V					12.8 mm	NPIC
74HC164BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		255 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	24 MHz	R-PQCC-N14		6 V	1 mm	2.5 mm		TRUE	2 V					3 mm	HC/UH
74HCT594DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		48 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			6.2 mm	HCT
74AHCT595BQ-Q100,1	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	90000000 Hz	CMOS	AEC-Q100	8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	12 ns	Shift Registers	.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		QUAD	90 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V					3.5 mm	AHCT/VHCT/VT
74LV4094D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.25	90 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1 V	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	LV/LV-A/LVX/H
74HCT164PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		54 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4		260	5 mm	HCT
74HCT164PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		54 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	HCT
NPIC6C4894PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		12	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					6.5 mm	NPIC
74AHCT594PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4	30	260	5 mm	HCT
74HC164BQ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		255 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	24 MHz	R-PQCC-N14	1	6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V		e4			3 mm	HC/UH
74AHCT595BQ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		12 ns		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	90 MHz	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V		e4			3.5 mm	AHCT/VHCT/VT
74HCT164PW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	54 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	HCT
NPIC6C4894D	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		12	5			SMALL OUTLINE				1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V					12.8 mm	NPIC
74HC4094NB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5		50 pF	IN-LINE		59 ns		2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN/NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		6 V	4.06 mm	7.62 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e3/e4			19.09 mm	HC/UH
74HC4015DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4			6.2 mm	HC/UH

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.