16 Digital Shift Registers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HCS166PWR	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	155000000 Hz	CMOS		8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	40 ns	7.8 Amp		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	5 mm	HC
SN74194N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74S194D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5	15 pF	SMALL OUTLINE	SOP16,.25	16.5 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	135 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	S
SN74HC194DW3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4			2/6		SMALL OUTLINE	SOP16,.4			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16
SN74LS595NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74HCS594QWBQBRQ1	Texas Instruments	SERIAL IN PARALLEL OUT		NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	54000000 Hz	CMOS	AEC-Q100	8		5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	45 ns	7.8 Amp		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	68 MHz	R-PQCC-N16	1	6 V	.8 mm	2.5 mm		TRUE	2 V	.002 mA		e4		260	3.5 mm	HC
SN74L99J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16
SN7494N-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	10 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	58 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				19.305 mm	TTL/H/L
SN74HC195DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4		5	2/6		SMALL OUTLINE	SOP16,.4	180 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	HC/UH
CD4015BNSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	3000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.3	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74LS395AN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16
CD40194BNSRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.25	440 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74ALS166DBRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	TTL		8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	13 ns		Shift Registers	.65 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	6.2 mm	ALS
SN74LS596J	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5	5	30 pF	IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	OPEN-COLLECTOR	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	55 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
TPIC6C595N	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8	TUBE	5	5	30 pF	IN-LINE	DIP16,.3			Shift Registers	2.54 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.305 mm	6C
SN74AHCT595N	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	85000000 Hz	CMOS		8	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	11.4 ns	8 Amp	Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AHCT/VHCT/VT
SN74ALS165J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AS195JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
CD4021BPWE4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		8		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	320 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO	e4	30	260	5 mm	4000/14000/40000
SN74AS194DG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	80000000 Hz	TTL		4		5	5		SMALL OUTLINE	SOP16,.25	7 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		HOLD MODE	e4	30	260	9.9 mm	AS
SN74HC195N3	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		4			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel	RIGHT			-40 Cel		DUAL		R-PDIP-T16
CD4015BNSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.3	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74LS597NSRG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP16,.3	60 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	LS
CD4021BNSRG4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74HCS596QDRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16		RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8	TR	5		50 pF			45 ns	7.8 Amp			125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G16	1	6 V				TRUE	2 V	.002 mA		e4	30	260		HC
SN74HC589J4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3	335 ns		Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-CDIP-T16						TRUE					NOT SPECIFIED	NOT SPECIFIED		HC/UH
SN74LV166ADR	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS		8	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	26 ns	12 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
CD74HCT4094MTE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	43 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE	e4	30	260	9.9 mm	HCT
SN74S195J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		15 pF	IN-LINE		16.5 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	105 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	109 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				19.56 mm	S
SN74LS395AJ-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		45 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	45 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				19.56 mm	LS
SN74194N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	26 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
CD74HCT597MT	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	16000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	57 ns	4 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.16 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	HCT
DM74LS165N	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5			IN-LINE		47 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm		COMPLEMENTARY	4.75 V						19.305 mm	LS
SN74166NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T16		5.25 V			Not Qualified	TRUE	4.75 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED		TTL/H/L
SN74LS597DR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE	SOP16,.25	60 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		SISO OPERATION ALSO AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74LS597N	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	20000000 Hz	TTL		8	TUBE	5		30 pF	IN-LINE	DIP16,.3	30 ns	24 Amp	Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	53 mA	COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74HC595N1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
CD74HC194E	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	20000000 Hz	CMOS		4	TUBE	4.5	2/6	50 pF	IN-LINE	DIP16,.3	265 ns	5.2 Amp	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V	.16 mA	HOLD MODE	e4			19.305 mm	HC
SN74LS597N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
CD74HC195MG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	9.9 mm	HC/UH
CD74HC195PWRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	5 mm	HC/UH
CD74HC595NSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.3	300 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	HC/UH
SN74LS395AD3	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G16
CD74HC195NSRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.3	265 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	10.2 mm	HC/UH
CD74HC194EE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	20000000 Hz	CMOS		4		4.5	2/6		IN-LINE	DIP16,.3	265 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4			19.305 mm	HC/UH
SN74HC166PWE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	HC/UH
SN74165NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T16					Not Qualified
CD74HC195PWR	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		4	TR	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	5.2 Amp	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.16 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	5 mm	HC

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.