16 Digital Shift Registers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS195AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	30000000 Hz	TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	26 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74HCS595QBQBRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8	TR	5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	28 ns	7.8 Amp		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	75 MHz	R-PQCC-N16	1	6 V	.8 mm	2.5 mm		TRUE	2 V	.002 mA		e4	30	260	3.5 mm	HC
CD74HCT165EE4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	18000000 Hz	CMOS		8	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	60 ns	4 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDIP-T16		5.5 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	4.5 V	.16 mA	SISO OPERATION ALSO AVAILABLE	e4			19.3 mm	HCT
SN74166NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T16		5.25 V				TRUE	4.75 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED		TTL/H/L
SN74HC594DTG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	24000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.25	250 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER	e4	30	260	9.9 mm	HC/UH
SN7494N	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	10 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	58 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74L96N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	5000000 Hz	TTL		5					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74LV165DBR	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		3.3			SMALL OUTLINE, SHRINK PITCH		47 ns			.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	50 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2.7 V						6.2 mm	LV/LV-A/LVX/H
SN74HC166J	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AS195J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AHCT594DRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	10.1 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	9.9 mm	AHCT/VHCT/VT
SN74AHC165D	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8					SMALL OUTLINE					1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V						9.9 mm	AHC
SN74HCS16507DR	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	120000000 Hz	CMOS		8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	45 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		COMPLEMENTARY	2 V	.002 mA		e4	30	260	9.9 mm	HC
SN74LV166ANSRG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.3	26 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	LV/LV-A/LVX/H
SN74LS166ADE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		8		5	5	15 pF	SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	32 mA	CLOCK INHIBIT	e4	30	260	9.9 mm	LS
SN74HC166DRG3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8			2/6		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16					Not Qualified
CD4031BF3A	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	2000000 Hz	CMOS	38535Q/M;38534H;883B	64	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	500 ns	4.2 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	8.5 MHz	R-GDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V	3 mA	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING	e0			19.56 mm	4000/14000/40000
CD4031BNSR	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS		64		5	5/15		SMALL OUTLINE	SOP16,.3	500 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	6 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	3 V		DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
CD74HCT4094ME4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	43 ns	4 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	TRUE	4.5 V	.16 mA	PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE	e4	30	260	9.9 mm	HCT
SN74LV595ADRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.25	25.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	9.9 mm	LV/LV-A/LVX/H
CD74HC194ME4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	9.9 mm	HC/UH
SN74166JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LV595ADBRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	45 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SN74LS594N	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1		TTL		8	TUBE	5		30 pF	IN-LINE	DIP16,.3	23 ns	24 Amp	Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	6.35 mm	Not Qualified	TRUE	4.75 V	65 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER	e4			19.3 mm	LS
CD4031BPW	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	2000000 Hz	CMOS		64	TUBE	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns	4.2 Amp	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	3 mA	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING	e4	30	260	5 mm	4000/14000/40000
SN74L99J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		50 pF	IN-LINE		200 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	5 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.56 mm	TTL/H/L
SN74AHCT594DR	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	95000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	10.1 ns	8 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	9.9 mm	AHCT/VHCT/VT
CD74HCT597ME4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	16000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	57 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	16 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	HCT
SN74HC166DT	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.25	190 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	40	260	9.9 mm	HC/UH
CD74HC4094NSR96	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	4000000 Hz	CMOS		8		4.5	2/6		SMALL OUTLINE	SOP16,.3	295 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	24 MHz	R-PDSO-G16		6 V			Not Qualified	TRUE	2 V							HC/UH
CD4035BE	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	2000000 Hz	CMOS		4	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	500 ns	4.2 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	8 MHz	R-PDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	CONFIGURABLE	3 V	3 mA	J AND K BAR SERIAL INPUT	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	4000/14000/40000
CD4031BPWG4	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS		64		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	6 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V		DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING	e4	30	260	5 mm	4000/14000/40000
CD74HC165EE4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	20000000 Hz	CMOS		8	TUBE	6	2/6	50 pF	IN-LINE	DIP16,.3	250 ns	5.2 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	2 V	.16 mA	SISO OPERATION ALSO AVAILABLE	e4			19.3 mm	HC
SN74165N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T16
SN74LV166APWR	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS		8	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns	12 Amp	Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
CD4021BNSRE4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74LS194AN1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified
CD4035BNSRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.3	500 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74LS165N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74LV595ADRG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	40000000 Hz	CMOS		8	TR, 13 INCH	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	25.5 ns	16 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74LS597NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
CD4014BPWE4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		8		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	320 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO	e4	30	260	5 mm	4000/14000/40000
SN74S194D3	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDSO-G16
SN74HC595JP4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LS589DP3	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8					SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74S195J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16
CD74HC194PWT	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		4	TR	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	5.2 Amp	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.16 mA	HOLD MODE	e4	30	260	5 mm	HC
SN74HCS165DR	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	150000000 Hz	CMOS		8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	45 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		COMPLEMENTARY	2 V	.002 mA		e4	30	260	9.9 mm	HC

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.