20 Digital Shift Registers 1,214

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS323DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74LS322N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	35000000 Hz	TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74F323N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	70000000 Hz	TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDIP-T20
SN74HC598FH	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8					CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS299JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74HC594FH	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74LS299NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74HC194FN3	Texas Instruments		INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		CMOS	4			2/6		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J20
SN74ALS964DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8					SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
SN74LS672NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74LS299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL	8	TUBE	5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS	e4	30	260	12.8 mm	LS
SN74LS596FN	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5	5	30 pF	CHIP CARRIER	LDCC20,.4SQ	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	OPEN-COLLECTOR	POSITIVE EDGE	0 Cel		QUAD	20 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	55 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC166FHP4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20											NOT SPECIFIED	NOT SPECIFIED
SN74S299J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	50000000 Hz	TTL	8		5	5	45 pF	IN-LINE	DIP20,.3	21 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	S
SN74ALS964N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20
SN74LS671J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE	DIP20,.3	25 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN74LS598DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74AS299N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	23.995 mm	AS
SN74S299J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74ALS323N3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3	19 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	17 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		COMMON I/O PINS; GATED OUTPUT ENABLE INPUT		NOT SPECIFIED	NOT SPECIFIED	25.4 mm	ALS
SN74HC323J	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC299JP4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-XDIP-T20
SN74F299NE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	70000000 Hz	TTL	8		5	5		IN-LINE	DIP20,.3	12 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e4			25.4 mm	F/FAST
SN74HC323NP3	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74HC164FH4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20											NOT SPECIFIED	NOT SPECIFIED
SN74LS299DWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74HC323N	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74LS295BFN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5	5		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20
SN74LS672FN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4					CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74HC322N1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74S299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	21 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	S
SN74LS598J	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5	5	45 pF	IN-LINE	DIP20,.3	28 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	80 mA	COMMON I/O PINS; MUXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN74AS299FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5			CHIP CARRIER					1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				8.9662 mm	AS
SN74LS395AFN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5	5	45 pF	CHIP CARRIER	LDCC20,.4SQ	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74ALS323N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74HC299N	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	CMOS	8		5	2/6		IN-LINE	DIP20,.3	288 ns		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDIP-T20		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		COMMON I/O PINS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	HC/UH
SN74HC299DWR-00	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		48 ns			1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				12.8 mm	HC/UH
SN74HC164FH	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC166FH4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20											NOT SPECIFIED	NOT SPECIFIED
SN74LS322J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1	35000000 Hz	TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20
SN74S299N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		45 pF	IN-LINE		21 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE				24.325 mm	S
SN74HC323NP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC165FHP4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20											NOT SPECIFIED	NOT SPECIFIED
SN74LS594FN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8					CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74AS323J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74AS299N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
TPIC6B596N	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	10000000 Hz		8	TUBE	5	5	30 pF	IN-LINE	DIP20,.3			Shift Registers	2.54 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			25.4 mm	6B
SN74LS395AFN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5	5		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.