20 Digital Shift Registers 1,214

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS322ADW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	TTL	8	5	5		SMALL OUTLINE	SOP20,.4		Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
SN74HC299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	8	5	2/6		SMALL OUTLINE	SOP20,.4	288 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMMON I/O PINS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	HC/UH
SN74AS194FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5			CHIP CARRIER				1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		HOLD MODE				8.9662 mm	AS
SN74LS299J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	8	5	5		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74HC194FHP4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS	4		2/6		CHIP CARRIER	LCC20,.35SQ		Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20
SN74LS322AN1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	TTL	8	5	5		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74HC164FN3	Texas Instruments		INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	8		2/6		CHIP CARRIER	LDCC20,.4SQ		Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74HC322N	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		2/6		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74HC195FHP4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	4		2/6		CHIP CARRIER	LCC20,.35SQ		Shift Registers	1.27 mm	85 Cel	RIGHT			-40 Cel		QUAD		S-PQCC-N20
SN74ALS963DWP3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8				SMALL OUTLINE	SOP20,.4		Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
SN74LS299N3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8	5	5	15 pF	IN-LINE	DIP20,.3	39 ns	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	LS
SN74ALS299DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8	5	5		SMALL OUTLINE	SOP20,.4		Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74ALS964J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	8				IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20					Not Qualified
SN74ALS166FN	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8				CHIP CARRIER	LDCC20,.4SQ		Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS299N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8	5		50 pF	IN-LINE		19 ns		2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.325 mm	ALS
SN74LS323DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8	5	5		SMALL OUTLINE	SOP20,.4		Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
SN74S299DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8	5	5	45 pF	SMALL OUTLINE	SOP20,.4	21 ns	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	S
SN74LS323FN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	39 ns	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD	25 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC299DW3	Texas Instruments		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		2/6		SMALL OUTLINE	SOP20,.4		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-PDSO-G20
SN74HC598J	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS	8				IN-LINE	DIP20,.3		Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74F323D	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8	5	5		SMALL OUTLINE	SOP20,.4		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDSO-G20					Not Qualified
SN74AS323NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8				IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74ALS166FN-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5			CHIP CARRIER				1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		CLOCK INHIBIT				8.9662 mm	ALS
SN74LS323NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8	5	5		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20
SN74ALS299NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8	5	5		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS164FN	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5		CHIP CARRIER	LDCC20,.4SQ		Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC194FH4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS	4		2/6		CHIP CARRIER	LCC20,.35SQ		Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20
SN74LV8153PWG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20			.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
SN74LS322AJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1	20000000 Hz	TTL	8	5	5		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20
SN74LS598J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	8	5	5		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
MC10H141FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	4				CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20	3		4.57 mm	8.965 mm	Not Qualified	TRUE				e3	30	260	8.965 mm	10H
MC10141FN	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	150000000 Hz	ECL	4		-5.2		CHIP CARRIER	LDCC20,.4SQ	3.8 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD	150 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE				e0			8.965 mm	10K
MC10141FNR2	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4				CHIP CARRIER		3.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-30 Cel	TIN LEAD	QUAD	150 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE				e0			8.965 mm	10K
MC10H141FN	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	4				CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	250 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE				e0		235	8.965 mm	10H
MC10H141FNR2	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	4				CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	250 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE				e0		235	8.965 mm	10H
MC10H141FNG	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	4				CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE				e3		260	8.965 mm	10H
MC74AC299DW	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	80000000 Hz	CMOS	8	5	3.3/5		SMALL OUTLINE	SOP20,.4	24.5 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	105 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e0		235	12.8 mm	AC
MC74ACT323DWR2	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	110000000 Hz	CMOS	8	5	5		SMALL OUTLINE	SOP20,.4	14.5 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	110 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e0		235	12.8 mm	ACT
MC74ACT299DWG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	110000000 Hz	CMOS	8	5	5		SMALL OUTLINE	SOP20,.4	16.5 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL	110 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e3		260	12.8 mm	ACT
MC74ACT323DW	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	110000000 Hz	CMOS	8	5	5		SMALL OUTLINE	SOP20,.4	14.5 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	110 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e0		235	12.8 mm	ACT
MC74AC323N	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8	5	3.3/5		IN-LINE	DIP20,.3		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDIP-T20		6 V	4.57 mm	7.62 mm	Not Qualified	TRUE	2 V			e0			26.415 mm	AC
MC74AC323DWR2	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	5	3.3/5		SMALL OUTLINE	SOP20,.4		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e0			12.8 mm	AC
MC74AC299DT	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	105000000 Hz	CMOS	8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	24.5 ns	Shift Registers	.65 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	105 MHz	R-PDSO-G20		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V						6.5 mm	AC
MC74ACT299DW	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	110000000 Hz	CMOS	8	5	5		SMALL OUTLINE	SOP20,.4	16.5 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	110 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e0		235	12.8 mm	ACT
MC74AC299N	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	80000000 Hz	CMOS	8	5	3.3/5		IN-LINE	DIP20,.3	24.5 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	105 MHz	R-PDIP-T20		6 V	4.57 mm	7.62 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e0		235	26.415 mm	AC
MC74ACT299N	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	110000000 Hz	CMOS	8	5	5		IN-LINE	DIP20,.3	16.5 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	110 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e0		235	26.415 mm	ACT
MC74ACT299NG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	110000000 Hz	CMOS	8	5	5		IN-LINE	DIP20,.3	16.5 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL	110 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e3		260	26.415 mm	ACT
MC74ACT299DWR2	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	110000000 Hz	CMOS	8	5	5		SMALL OUTLINE	SOP20,.4	16.5 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	110 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e0		235	12.8 mm	ACT

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.