COMMERCIAL Digital Shift Registers 1,172

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS589D1	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8					SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74178N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE	DIP14,.3	35 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74LS299DWRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	20 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V		HOLD MODE; COMMON I/O PINS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74AS95FN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4					CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL				QUAD		S-PQCC-J20
SN74165JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-XDIP-T16
SN74198J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5		15 pF	IN-LINE	DIP24,.6	30 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE		DUAL	25 MHz	R-GDIP-T24		5.25 V			Not Qualified	TRUE	4.75 V	127 mA	HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK		NOT SPECIFIED	NOT SPECIFIED		TTL/H/L
SN74L96J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1	5000000 Hz	TTL	5					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16					Not Qualified
SN74LS295BNP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T14
SN74L91N-10	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE		150 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	6.5 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	6.6 mA					19.305 mm	TTL/H/L
SN74LS164N-00	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	27 mA					19.305 mm	LS
SN74F323DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	70 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	F/FAST
SN74LS674N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	16					IN-LINE	DIP24,.6			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T24
SN74195NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL				DUAL		R-PDIP-T16
SN74F166AN	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	110000000 Hz	TTL	8		5	5	50 pF	IN-LINE	DIP16,.3	8 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	110 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	70 mA	CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	F/FAST
SN74LS166N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN7496N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	10000000 Hz	TTL	5		5	5	15 pF	IN-LINE	DIP16,.3	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	10 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	79 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74LS594NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE	SOP16,.3	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	20 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SN74178N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-PDIP-T14					Not Qualified
SN74LS295AJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1	20000000 Hz	TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T14					Not Qualified
SN74LS594NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74179J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-XDIP-T16
SN74ALS299DBLE	Texas Instruments		COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP20(UNSPEC)			Shift Registers		70 Cel					DUAL		R-PDSO-G20					Not Qualified
SN74F299NSRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP20,.3	12 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	70 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.6 mm	F/FAST
SN74LS599N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS674DWG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL	16	TUBE	5	5	45 pF	SMALL OUTLINE	SOP24,.4	40 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	28 MHz	R-PDSO-G24	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	40 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN	e4	NOT SPECIFIED	260	15.4 mm	LS
SN74ALS164N	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5	50 pF	IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL		R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	18.9 mm	ALS
SN74L91J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1	3000000 Hz	TTL	8					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T14					Not Qualified
SN74LS597DRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5			SMALL OUTLINE	SOP16,.25	60 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE		DUAL	20 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		SISO OPERATION ALSO AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74LS164N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-PDIP-T14					Not Qualified
SN74LS91J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-XDIP-T14
SN74LS165N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16
SN74LS95BN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	TTL	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74LS594N3	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5			IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	20 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74LS91D	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	SMALL OUTLINE	SOP14,.25	40 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	10 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	20 mA			NOT SPECIFIED	NOT SPECIFIED	8.65 mm	LS
SN74LS595FN	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5	5	30 pF	CHIP CARRIER	LDCC20,.4SQ	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE		QUAD	20 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	65 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74LS195N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	30000000 Hz	TTL	4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL				DUAL		R-PDIP-T16					Not Qualified
SN74165DR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5			SMALL OUTLINE		31 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	20 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V						9.9 mm	TTL/H/L
SN74LS95BD3	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5	5		SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G14
SN74164J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-XDIP-T14
SN74LS674DW3	Texas Instruments		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	16					SMALL OUTLINE	SOP24,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G24											NOT SPECIFIED	NOT SPECIFIED
SN74LS598NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS589DP1	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8					SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74195J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		26 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	39 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				19.56 mm	TTL/H/L
SN74LS595NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP16,.3	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE		DUAL	20 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SN74ALS164ADRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP14,.25	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	AND-GATED SERIAL (A AND B) INPUTS	e4	30	260	8.65 mm	ALS
SN74LS295BFN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5	5	45 pF	CHIP CARRIER	LDCC20,.4SQ	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	29 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74AS194J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
DM74LS165WM	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5			SMALL OUTLINE		47 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	25 MHz	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm		COMPLEMENTARY	4.75 V						10.3 mm	LS

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.