COMMERCIAL Digital Shift Registers 1,172

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS322ADW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G20
SN7495AN3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74LS194AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	25000000 Hz	TTL	4		5	5	15 pF	IN-LINE	DIP16,.3	26 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE		DUAL	25 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	23 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN7495AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	25000000 Hz	TTL	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE		DUAL	36 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT AND LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	7495
SN74AS194FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5			CHIP CARRIER					1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		HOLD MODE				8.9662 mm	AS
SN74LS597D	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL	8	TUBE	5		45 pF	SMALL OUTLINE	SOP16,.25	60 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	53 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	LS
SN74ALS166NSR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	45000000 Hz	TTL	8	TR	5	5		SMALL OUTLINE	DIP16,.3	13 ns	8 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	ALS
SN74LS589J	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5		30 pF	IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE		DUAL	20 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	45 mA			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74LS674N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	16					IN-LINE	DIP24,.6			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T24					Not Qualified
SN74AS194J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74179N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-PDIP-T16					Not Qualified
SN7491AN-10	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	18 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	58 mA					19.305 mm	TTL/H/L
SN74LS299J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74LS322AN1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	20000000 Hz	TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T20					Not Qualified
SN74L99JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16
SN74LS195J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		26 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	39 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				19.56 mm	LS
SN74LS91N-10	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	18 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	20 mA					19.305 mm	LS
SN74ALS166DBRG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	13 ns		Shift Registers	.65 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	6.2 mm	ALS
SN74ALS963DWP3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8					SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G20
SN74LS599N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74178J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-XDIP-T14
SN7495N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP14,.3	35 ns		Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-PDIP-T14			5.08 mm	7.62 mm	Not Qualified	TRUE					NOT SPECIFIED	NOT SPECIFIED	19.305 mm	74
SN74LS299N3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5	15 pF	IN-LINE	DIP20,.3	39 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	20 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	LS
SN74AS95AD	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4					SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL				DUAL		R-PDSO-G14					Not Qualified
SN74LS166ANE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	TTL	8		5	5		IN-LINE	DIP16,.3	25 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V		CLOCK INHIBIT	e4			19.305 mm	LS
SN74LS595NE4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5	30 pF	IN-LINE	DIP16,.3	25 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	65 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.305 mm	LS
SN7495AN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.305 mm	TTL/H/L
SN74ALS299DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74ALS964J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T20					Not Qualified
SN74L99NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16
SN74LS395AN-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		45 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE		DUAL	45 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				19.305 mm	LS
SN74LS295BN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T14
SN74F166DR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5		50 pF	SMALL OUTLINE		9 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	110 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	60 mA	CLOCK INHIBIT				9.9 mm	F/FAST
SN74AS194DP3	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4					SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74S194JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL				DUAL		R-XDIP-T16
SN74LS597JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74ALS166FN	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8					CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel					QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74164NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-PDIP-T14
SN74LS95BD	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5	5	15 pF	SMALL OUTLINE	SOP14,.25	32 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE		DUAL	36 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	LS
SN74AS395J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LS165N-10	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	35 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	36 mA	CLOCK INHIBIT				19.305 mm	LS
SN74ALS299N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE		19 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	30 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.325 mm	ALS
SN74AS95DP3	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4					SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL				DUAL		R-PDSO-G14
SN74ALS166DG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	ALS
SN74AS194N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		50 pF	IN-LINE	DIP16,.3	7 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	53 mA	HOLD MODE	e4			19.305 mm	AS
SN7496NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	5		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT				DUAL		R-PDIP-T16					Not Qualified
SN74165J-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5		15 pF	IN-LINE		31 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	26 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	63 mA	CLOCK INHIBIT				19.56 mm	TTL/H/L
SN74LS323DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G20

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.