INDUSTRIAL Digital Shift Registers 1,482

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LV595ADBRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SN74HC595N-10	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5		50 pF	IN-LINE		40 ns			2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				19.305 mm	HC/UH
SN74AHCT595NSR	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.3	11.4 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	AHCT/VHCT/VT
SN74LV164ANSE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		2.5			SMALL OUTLINE		24 ns			1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	LV/LV-A/LVX/H
SN74HC165D3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74AHC165N	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8					IN-LINE					2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.305 mm	AHC
SN74LV595ANSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.3	25.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	LV/LV-A/LVX/H
SN74HC595NP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC299DW3	Texas Instruments		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-PDSO-G20
SN74HC598J	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		8					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LV164APWE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	24 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		AND-GATED SERIAL INPUTS (A AND B)	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74HC194FH4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS		4			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20
SN74LV8153PWG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20				.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
SN74HC594NP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74LV595AIPWRG4Q1	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	40000000 Hz	CMOS	AEC-Q100	8	TR, 13 INCH	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	LCC16,.1X.14,20	25.5 ns	16 Amp	Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.04 mA		e4	30	260	5 mm	LV/LV-A/LVX/H
MC100EP445FAR2G	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	100E
MC100EP445FAG	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	100E
MC100EP142FAR2	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	100E
MC10EP446MNG	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns			.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
MC10EP446FAG	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
MC10EP142FAR2G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3		260	7 mm	10E
MC100EP142FAR2G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	7 mm	100E
MC100EP446FA	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
MC10EP446FAR2G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
MC100EP445MNG	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.795 ns			.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	2800 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC100EP446MNG	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns			.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
100336QIX	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		4					CHIP CARRIER		1.8 ns			1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		QUAD	350 MHz	S-PQCC-N28			4.57 mm	11.43 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				11.43 mm	100K
MC100EP445MNR4G	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.795 ns			.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC100EP142FA	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	100E
MC100EP446FAR2G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	100E
MC10EP142MNG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.8 ns		Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	5 mm	10E
MC10EP445FAG	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
MC100EP445FA	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	2500 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
MC10EP446MNR4G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns			.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
MC100EP445FAR2	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
MC10EP142FA	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	10E
MC100EP446MNR4G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns			.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC10EP445FA	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC10EP445FAR2	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC10EP445FAR2G	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns			.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
MC100EP142MNG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.8 ns		Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	5 mm	100E
MC10EP446FA	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC10EP446FAR2	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC100EP142MNR4G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.8 ns		Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	5 mm	100E
MC10EP445MNR4G	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.795 ns			.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	5 mm	10E
MC100EP446FAR2	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
100336QI	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		4					CHIP CARRIER		1.8 ns			1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		QUAD	350 MHz	S-PQCC-N28			4.57 mm	11.43 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				11.43 mm	100K
MC10EP142FAR2	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	10E

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.