INDUSTRIAL Digital Shift Registers 1,482

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Length	Family
HCF40194BF	STMicroelectronics		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		4		3/15		IN-LINE	DIP16,.3		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-XDIP-T16					Not Qualified
M74HC164M1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	44 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-PDSO-G14		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e0	8.65 mm	HC/UH
M74HC4094C1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	16000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	68 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	16 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e0	8.9662 mm	HC/UH
M74HC299C1R	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	43 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e3	8.9662 mm	HC/UH
M74HC194F1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	24000000 Hz	CMOS		4	5	2/6	50 pF	IN-LINE	DIP16,.3	33 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-GDIP-T16		6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V	HOLD MODE	e0		HC/UH
HCF4035BC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS		4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	500 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	2 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	CONFIGURABLE	3 V	J AND KBAR SERIAL INPUT	e3	8.9662 mm	4000/14000/40000
M74HC595F1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	25000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP16,.3	40 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	25 MHz	R-GDIP-T16		6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e0		HC/UH
M74HC195C1R	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	30000000 Hz	CMOS		4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	30 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e3	8.9662 mm	HC/UH
HCF40194BC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	3000000 Hz	CMOS		4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	440 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V	HOLD MODE	e3	8.9662 mm	4000/14000/40000
M74HC164F1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	22000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP14,.3	44 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-GDIP-T14		6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V		e0		HC/UH
HCF4094BC1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1250000 Hz	CMOS		8	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	840 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	1.25 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e3	8.9662 mm	4000/14000/40000
HCF4015BE	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	3000000 Hz	CMOS		4	5	3/15		IN-LINE	DIP16,.3	320 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDIP-T16		15 V	5.1 mm	7.62 mm	Not Qualified	TRUE	3 V	LG_MAX	e0	20 mm	4000/14000/40000
M74HC164C1R	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	40 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		e3	8.9662 mm	HC/UH
HCF4021BM	STMicroelectronics		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5/15		SMALL OUTLINE	SOP16,.25		Shift Registers	1.27 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified				e0
HCF4031BC1	STMicroelectronics	SERIAL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS		64	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	500 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	2 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	3 V	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING	e3	8.9662 mm	4000/14000/40000
M74HC299B1N	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	16000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP20,.3	59 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	16 MHz	R-PDIP-T20		6 V	3.93 mm	7.62 mm	Not Qualified	TRUE	2 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0		HC/UH
M74HC165C1R	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	30000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	30 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V	CLOCK INHIBIT	e0	8.9662 mm	HC/UH
HCF40100BF	STMicroelectronics		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		32		3/15		IN-LINE	DIP16,.3		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel	TIN LEAD	DUAL		R-XDIP-T16					Not Qualified				e0
M74HC597C1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		e0	8.9662 mm	HC/UH
M74HC323B1N	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	16000000 Hz	CMOS		8	5	5	50 pF	IN-LINE	DIP20,.3	59 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	16 MHz	R-PDIP-T20		6 V	3.93 mm	7.62 mm	Not Qualified	TRUE	2 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0		HC/UH
HCF40104BC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	3000000 Hz	CMOS		4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	440 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		e3	8.9662 mm	4000/14000/40000
HCF4031BE	STMicroelectronics		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	2000000 Hz	CMOS		64		3/15		IN-LINE	DIP16,.3		Shift Registers	2.54 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16					Not Qualified				e0
HCF4015BC1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	3000000 Hz	CMOS		4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	320 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e3	8.9662 mm	4000/14000/40000
M74HC595B1N	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	25000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP16,.3	40 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	25 MHz	R-PDIP-T16		6 V	5.1 mm	7.62 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e0		HC/UH
HCF4094BE	STMicroelectronics		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	1250000 Hz	CMOS		8		3/15		IN-LINE	DIP16,.3		Shift Registers	2.54 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16					Not Qualified				e0
M74HC164C1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	44 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	22 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		e0	8.9662 mm	HC/UH
M74HC4094C1R	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	50 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e3	8.9662 mm	HC/UH
M74HC165M1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	48 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	20 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	CLOCK INHIBIT	e0	9.9 mm	HC/UH
HCF4015BF	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2	3000000 Hz	CMOS		4	5	3/15		IN-LINE	DIP16,.3	320 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	8.5 MHz	R-GDIP-T16		15 V	5 mm	7.62 mm	Not Qualified	TRUE	3 V	LG_MAX	e0	20 mm	4000/14000/40000
M74HC299F1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	16000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP20,.3	59 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	16 MHz	R-GDIP-T20		6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0	24.51 mm	HC/UH
M74HC323C1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	16000000 Hz	CMOS		8	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	59 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	16 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0	8.9662 mm	HC/UH
M74HC195F1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	26000000 Hz	CMOS		4	5	2/6	50 pF	IN-LINE	DIP16,.3	36 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	26 MHz	R-GDIP-T16		6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e0		HC/UH
M74HC194M1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	33 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	HOLD MODE	e0	9.9 mm	HC/UH
HCF4035BE	STMicroelectronics		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	2000000 Hz	CMOS		4		3/15		IN-LINE	DIP16,.3		Shift Registers	2.54 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16					Not Qualified				e0
M74HC597M1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	36 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e0	9.9 mm	HC/UH
HCF4094BM	STMicroelectronics		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1250000 Hz	CMOS		8		3/15		SMALL OUTLINE	SOP16,.25		Shift Registers	1.27 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified				e0
HCF4517BC1	STMicroelectronics	SERIAL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS		64	5	5/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	400 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER	e3	8.9662 mm	4000/14000/40000
933406660652	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		330 ns		1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	14 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		e4	9.9 mm	4000/14000/40000
NSL002D	NXP Semiconductors		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz			8		2.5/5		SMALL OUTLINE	SOP16,.25		Shift Registers	1.27 mm	85 Cel	RIGHT			-40 Cel		DUAL		R-PDSO-G16					Not Qualified
935273177112	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		26 ns		.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		COMPLEMENTARY	2 V		e4	5 mm	LV/LV-A/LVX/H
933406730518	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		64	5			SMALL OUTLINE		440 ns		1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16		15 V	2.65 mm	7.5 mm		TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER	e4	10.3 mm	4000/14000/40000
933372680652	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5			SMALL OUTLINE		260 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	22 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		e4	9.9 mm	4000/14000/40000
935301196118	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	2.5			SMALL OUTLINE		26 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		COMPLEMENTARY	2 V			9.9 mm	LV/LV-A/LVX/H
933372670653	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		260 ns			85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	15 V			Not Qualified	TRUE	3 V		e4		4000/14000/40000
933372740653	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		250 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e4	9.9 mm	4000/14000/40000
933636950652	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS		64	5			IN-LINE		260 ns		2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDIP-T14		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V			19.025 mm	4000/14000/40000
933334330652	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		64	5			IN-LINE		480 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V		e4	21.6 mm	4000/14000/40000
933593460652	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4		CMOS		64	5			IN-LINE		260 ns		2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-GDIP-T14		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V				4000/14000/40000

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.