Texas Instruments Digital Shift Registers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN54HC166WR	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		CMOS		8		5		50 pF	FLATPACK		225 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F16	6 V	2.03 mm	6.73 mm	Not Qualified	TRUE	2 V		CLOCK INHIBIT				10.2 mm	HC/UH
SNJ54LS595J	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1		TTL	MIL-PRF-38535	8	TUBE	5	5	30 pF	IN-LINE	DIP16,.3	25 ns	24 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	25 MHz	R-GDIP-T16	5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	65 mA	PARALLEL OUTPUT IS REGISTERED	e0			19.56 mm	LS
SNJ54LS323FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	NO	YES	1	25000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	15 pF	CHIP CARRIER	LCC20,.35SQ	39 ns	24 Amp	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	25 MHz	S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	53 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0			8.89 mm	LS
SNJ54LS194AW-10	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		26 ns			1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	23 mA	HOLD MODE				10.2 mm	LS
SNJ54L95T-16	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		50 pF	FLATPACK		200 ns				125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	5 MHz	R-GDFP-F14	5.5 V			Not Qualified	TRUE	4.5 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD					TTL/H/L
SN54HC166FH	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS		8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	125 Cel				-55 Cel		QUAD		S-XQCC-N20				Not Qualified						NOT SPECIFIED	NOT SPECIFIED
74ACT11898DW	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		10		5	5	50 pF	SMALL OUTLINE	SOP20,.4	10.6 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	40 MHz	R-PDSO-G20	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ACT
SN54LS596J	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5	5	30 pF	IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	125 Cel	RIGHT	OPEN-COLLECTOR	POSITIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	55 mA	PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SNJ54LS194AJ-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		15 pF	IN-LINE		26 ns			2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	23 mA	HOLD MODE				19.56 mm	LS
SNJ5495AW-10	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		32 ns			1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F14	5.5 V	2.03 mm	6.29 mm	Not Qualified	TRUE	4.5 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				9.21 mm	TTL/H/L
SN54HC164FK-00	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		CMOS		8		5		50 pF	CHIP CARRIER		53 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD	21 MHz	S-CQCC-N20	6 V	2.03 mm	8.89 mm	Not Qualified	TRUE	2 V						8.89 mm	HC/UH
SNJ54HC595J-00	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		CMOS		8		5		50 pF	IN-LINE		48 ns			2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	21 MHz	R-GDIP-T16	6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				19.56 mm	HC/UH
SN54L91T-16	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		150 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	6.5 MHz	R-GDFP-F14	5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	6.6 mA						TTL/H/L
JM38510/00901BDA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		32 ns			1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F14	5.5 V	2.03 mm	6.29 mm	Not Qualified	TRUE	4.5 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				9.21 mm	TTL/H/L
M38510/30601SFX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-PRF-38535 Class S	4		5			FLATPACK		47 ns				125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDFP-F16	5.5 V			Not Qualified	TRUE	4.5 V							LS
SN54LS165AFK	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		8		5	5	15 pF	CHIP CARRIER	LCC20,.35SQ	25 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD	25 MHz	S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	COMPLEMENTARY	4.5 V	30 mA	CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	LS
SNJ54LS166AJ	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	25000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	25 ns	8 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	25 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	32 mA	CLOCK INHIBIT	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
TMS3113NC	Texas Instruments		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		MOS		133					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-25 Cel		DUAL		R-PDIP-T16				Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN54194J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		15 pF	IN-LINE		26 ns			2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	63 mA	HOLD MODE				19.56 mm	TTL/H/L
SNJ54ALS299W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	YES	1	17000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	50 pF	FLATPACK	FL20,.3	25 ns	24 Amp	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	17 MHz	R-GDFP-F20	5.5 V	2.54 mm	6.92 mm	Not Qualified	TRUE	4.5 V	40 mA	COMMON I/O PINS; GATED OUTPUT ENABLE INPUT	e0	NOT SPECIFIED	NOT SPECIFIED	13.09 mm	ALS
SN54AS195J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5			IN-LINE					2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL		R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT				19.56 mm	AS
SN54L91T-00	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		150 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	6.5 MHz	R-GDFP-F14	5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	6.6 mA						TTL/H/L
SNJ5495AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	MIL-PRF-38535	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDIP-T14	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SNJ54LV166AW	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1	35000000 Hz	CMOS	MIL-PRF-38535	8		2.5	3.3		FLATPACK	FL10,.3	26 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	90 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE				10.16 mm	LV/LV-A/LVX/H
SN54ALS299J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		50 pF	IN-LINE		25 ns			2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.195 mm	ALS
SNJ54L91T-01	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		150 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	6.5 MHz	R-GDFP-F14	5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	6.6 mA						TTL/H/L
8302102RA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	17000000 Hz	TTL	MIL-STD-883	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	25 ns	24 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	17 MHz	R-GDIP-T20	5.5 V	5.08 mm	7.62 mm	Qualified	TRUE	4.5 V	40 mA	COMMON I/O PINS; GATED OUTPUT ENABLE INPUT	e0			24.195 mm	ALS
74F194SC	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5			SMALL OUTLINE		8 ns			1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	90 MHz	R-PDSO-G16	5.5 V	1.753 mm	3.899 mm		TRUE	4.5 V						9.902 mm	F/FAST
SNJ54ALS164FH	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		TTL	38535Q/M;38534H;883B	8		5	5		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	125 Cel				-55 Cel		QUAD		S-XQCC-N20				Not Qualified						NOT SPECIFIED	NOT SPECIFIED
74ACT11898N	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		10		5	5	50 pF	IN-LINE	DIP20,.3	10.6 ns		Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	40 MHz	R-PDIP-T20	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ACT
CD54ACT323H	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD			UNSPECIFIED	UNSPECIFIED		YES	1		CMOS		8		5			UNCASED CHIP		12.9 ns				125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		UPPER	90 MHz	X-XUUC-N	5.5 V			Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL					ACT
M38510/30609SFA	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-PRF-38535 Class S	8		5			FLATPACK		46 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDFP-F16	5.5 V			Not Qualified	TRUE	4.5 V							LS
SNJ54L95T-17	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		50 pF	FLATPACK		200 ns				125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	5 MHz	R-GDFP-F14	5.5 V			Not Qualified	TRUE	4.5 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD					TTL/H/L
TMS3102LC	Texas Instruments		OTHER	WIRE	10		ROUND	METAL			2		MOS		80					CYLINDRICAL	CAN10,.23			Shift Registers		85 Cel				-25 Cel		BOTTOM		O-MBCY-W10				Not Qualified						NOT SPECIFIED	NOT SPECIFIED
DM54L95W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5			FLATPACK		90 ns			1.27 mm	125 Cel	BIDIRECTIONAL		NEGATIVE EDGE	-55 Cel		DUAL	6 MHz	R-GDFP-F14	5.5 V	2.032 mm	6.2865 mm		TRUE	4.5 V		LG-MAX; SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				9.779 mm	TTL/H/L
SNC54S194J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	MIL-STD-883 Class B (Modified)	4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL			-55 Cel		DUAL		R-XDIP-T16				Not Qualified	TRUE								S
SNJ54AS323FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL	38535Q/M;38534H;883B	8		5		50 pF	CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	AS
TMS3121JC	Texas Instruments		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	4	2500000 Hz	MOS		64			5,-12		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-25 Cel		DUAL		R-XDIP-T16				Not Qualified
8302101RA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	17000000 Hz	TTL	MIL-STD-883	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	25 ns	24 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	17 MHz	R-GDIP-T20	5.5 V	5.08 mm	6.92 mm	Qualified	TRUE	4.5 V	40 mA	COMMON I/O PINS; GATED OUTPUT ENABLE INPUT	e0			24.2 mm	ALS
DM2504CN	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1				12		5			IN-LINE		28 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	15 MHz	R-PDIP-T24	5.25 V	5.334 mm	15.24 mm		TRUE	4.75 V						31.915 mm	2504
SN54LS594FK	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	UNSPECIFIED		YES	1		TTL		8		5		30 pF	CHIP CARRIER	LCC20,.35SQ	23 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD	20 MHz	S-XQCC-N20	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	65 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	LS
SNJ54L164T-15	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		74 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	18 MHz	R-GDFP-F14	5.5 V			Not Qualified	TRUE	4.5 V	27 mA						TTL/H/L
SN54LS195AW-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		26 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	39 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT				10.2 mm	LS
SN54HC299FK-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		CMOS		8		5		50 pF	CHIP CARRIER		57 ns			1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	21 MHz	S-CQCC-N20	6 V	2.03 mm	8.89 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				8.89 mm	HC/UH
SNJ5496J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		5		5		15 pF	IN-LINE		40 ns			2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	10 MHz	R-GDIP-T16	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	68 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				19.56 mm	TTL/H/L
SN54166W-10	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		15 pF	FLATPACK		30 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	35 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	127 mA	CLOCK INHIBIT				10.2 mm	TTL/H/L
SNJ54AS194W	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-PRF-38535	4		5			FLATPACK		8 ns			1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	75 MHz	R-GDFP-F16	5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V		SIPO OPERATION ALSO AVAILABLE				10.16 mm	AS
SN54L164T-17	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		74 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	18 MHz	R-GDFP-F14	5.5 V			Not Qualified	TRUE	4.5 V	27 mA						TTL/H/L

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.