Texas Instruments Digital Shift Registers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC323J	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC299JP4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-XDIP-T20
SN74LS673J	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		16		5		45 pF	IN-LINE	DIP24,.6	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	20 MHz	R-GDIP-T24		5.25 V			Not Qualified	TRUE	4.75 V	80 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN		NOT SPECIFIED	NOT SPECIFIED		LS
SN74HCS164QPWRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	42 ns	7.8 Amp		.65 mm	125 Cel	RIGHT	TOTEM POLE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	62 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	5 mm	HC
SN74LV594AD	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	18.6 ns	12 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74AS95D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5		50 pF	SMALL OUTLINE	SOP14,.25	9.5 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	100 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.905 mm	Not Qualified	TRUE	4.5 V	39 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	8.645 mm	AS
SN74F299NE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	70000000 Hz	TTL		8		5	5		IN-LINE	DIP20,.3	12 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e4			25.4 mm	F/FAST
SN74ALS166NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC166NP3	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN7491ANP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74ALS164ANSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP14,.3	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		AND-GATED SERIAL (A AND B) INPUTS	e4	30	260	10.2 mm	ALS
SN74F166D	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	110000000 Hz	TTL		8		5	5	50 pF	SMALL OUTLINE	SOP16,.25	9 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	110 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	60 mA	CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	F/FAST
SN74LV595APWG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	40000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74HC323NP3	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74HC164FH4	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS		8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20											NOT SPECIFIED	NOT SPECIFIED
SN74AHCT594NSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.3	10.1 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	10.2 mm	AHCT/VHCT/VT
SN74LS299DWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74HC673NT3	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		16					IN-LINE	DIP24,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T24											NOT SPECIFIED	NOT SPECIFIED
SN74AHCT595PWLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	5 mm	AHCT/VHCT
SN74HC323N	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN7495AJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-XDIP-T14
SN74LS295BFN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		4		5	5		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20
CD74HC195NSR	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		4	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	265 ns	5.2 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.16 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	10.2 mm	HC
SN74199N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5	15 pF	IN-LINE	DIP24,.6	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	127 mA	CLOCK INHIBIT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	31.75 mm	TTL/H/L
SN74HC166DTE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.25	190 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	40	260	9.9 mm	HC/UH
SN74S194N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5		15 pF	IN-LINE		16.5 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	105 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	135 mA	HOLD MODE				19.305 mm	S
SN74LS672FN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		4					CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74LS195ANP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74AHCT59PWR	Texas Instruments		INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25			Shift Registers	.635 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16					Not Qualified
SN74HC594N-00	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5		50 pF	IN-LINE		37 ns			2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER				19.305 mm	HC/UH
SN74195J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-XDIP-T16
SN74AS194NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
CD74HCT194EE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	18000000 Hz	CMOS		4		5	5		IN-LINE	DIP16,.3	56 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		HOLD MODE	e4			19.305 mm	HCT
SN74HC322N1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74S299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	21 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	S
SN74LS96N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		5		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74LS165AN1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74166N-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	127 mA	CLOCK INHIBIT				19.305 mm	TTL/H/L
SN74LS164DRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP14,.25	32 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	36 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	LS
SN74LS166ADRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		8		5	5	15 pF	SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	32 mA	CLOCK INHIBIT	e4	30	260	9.9 mm	LS
SN74AHC595NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		3.3	2/5.5		SMALL OUTLINE	SOP16,.3	18.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	AHC/VHC/H/U/V
SN74HC166NP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74165J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-XDIP-T16
SN74LS96NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		5		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16
SN74LS598J	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5	5	45 pF	IN-LINE	DIP20,.3	28 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	80 mA	COMMON I/O PINS; MUXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN74AS299FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		8		5			CHIP CARRIER					1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				8.9662 mm	AS
SN74AHCT595DRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	85000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	11.4 ns	8 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	AHCT/VHCT/VT
SN74LV164ADBRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	24 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	6.2 mm	LV/LV-A/LVX/H

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.