Texas Instruments Digital Shift Registers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CD74HC595DWRE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.4	300 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e4	30	260	10.3 mm	HC/UH
SN74198N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	127 mA	HOLD MODE				31.75 mm	TTL/H/L
SN74LS299DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
CD74AC164MG4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	54000000 Hz	CMOS		8		3	3.3/5		SMALL OUTLINE	SOP14,.25	157 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1.5 V			e4	30	260	8.65 mm	AC
SN74ALS299J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74LV166APWE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
CD4034BEE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	2000000 Hz	CMOS		8		5	5/15		IN-LINE	DIP24,.6	700 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDIP-T24		18 V	5.08 mm	15.24 mm	Not Qualified	TRUE	3 V		COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE	e4			31.75 mm	4000/14000/40000
SN74LS295BDR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5		45 pF	SMALL OUTLINE		30 ns			1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	29 mA					8.65 mm	LS
SN74L96N-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		5		5		15 pF	IN-LINE		80 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	5 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	40 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				19.305 mm	TTL/H/L
SN74LV594ANSE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		2.5			SMALL OUTLINE		18.6 ns			1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4			10.2 mm	LV/LV-A/LVX/H
SN74ALS323NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74LS395AJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74HC589NP3	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3	335 ns		Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16						TRUE					NOT SPECIFIED	NOT SPECIFIED		HC/UH
SN74195J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	30000000 Hz	TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	26 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	EXTERNAL CLOCK GATED MASTER RESET AND USED AS SHIFT CLOCK		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SN74LV595ADBLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SN74ALS165NE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3	14 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		CLOCK INHIBIT	e4			19.305 mm	ALS
SN74ALS165JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74AHCT595DE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	11.4 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	30	260	9.9 mm	AHCT/VHCT/VT
SN74LS595DE4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		SERIAL OUTPUT PIN FOR CASCADING	e4	30	260	9.9 mm	LS
SN74LS195AN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	30000000 Hz	TTL		4		5	5	15 pF	IN-LINE	DIP16,.3	26 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
CD74HC195PWTE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	5 mm	HC/UH
SN74LS194AN-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5		15 pF	IN-LINE		26 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	23 mA	HOLD MODE				19.305 mm	LS
SN74L99N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74LS598FN	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		8		5	5	45 pF	CHIP CARRIER	LDCC20,.4SQ	28 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		QUAD	20 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	80 mA	COMMON I/O PINS; MUXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74LS589N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LS595NSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP16,.3	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SN74HC598N1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC299NP3	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-PDIP-T20
SN74LS166AD3	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDSO-G16		5.25 V				TRUE	4.75 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED		LS
SN74LS166ANSR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	25000000 Hz	TTL		8	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.3	25 ns	8 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V	32 mA	CLOCK INHIBIT	e4	NOT SPECIFIED	260	10.2 mm	LS
CD74HC195M96E4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	9.9 mm	HC/UH
SN74AS195DR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5		50 pF	SMALL OUTLINE		10.5 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	57 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT				9.9 mm	AS
SN74HC594JP4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T16
SN74LS299DWE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS	e4	30	260	12.8 mm	LS
SN74LV165DBLE	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	24000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	47 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2.7 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SN74ALS166DE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE	SOP16,.25	13 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	ALS
SN74LS597N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS596JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74L99N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74HCS595QDRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE		28 ns	7.8 Amp			125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G16	1	6 V				TRUE	2 V	.002 mA		e4	30	260		HC
SN74LS165J-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	36 mA	CLOCK INHIBIT				19.56 mm	LS
SN7491AN-00	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	18 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	58 mA					19.305 mm	TTL/H/L
SN74HC673JTP4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		16					IN-LINE	DIP24,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T24											NOT SPECIFIED	NOT SPECIFIED
SN74HC166NSRG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.3	190 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	HC/UH
SN74LS323FN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		8		5	5		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20
CD74HC597NSRG4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		4.5	2/6		SMALL OUTLINE	SOP16,.3	265 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	HC/UH
SN74LS396NP3	Texas Instruments																																												NOT SPECIFIED	NOT SPECIFIED
CD4035BMG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.25	500 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT	e4	30	260	9.9 mm	4000/14000/40000

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.