D LATCH Latches & Flip-Flops 2,378

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HC259NB	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		1		5		50 pF	IN-LINE		51 ns			2.54 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V	4.06 mm	7.62 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				19.09 mm	HC/UH
74HC259BQ	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	280 ns	4 Amp	FF/Latches	.5 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-N16	1	6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	3.5 mm	HC/UH
74HC259PW,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	255 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	5 mm	HC/UH
74HC75PW	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	CMOS		2		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns	4 Amp	FF/Latches	.65 mm	125 Cel		HIGH LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
74LVT573BQ-G	NXP Semiconductors	D LATCH	INDUSTRIAL	NO LEAD	20	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		8	TR	3.3	3.3		CHIP CARRIER	LCC20,.1X.18,20		64 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		QUAD		R-PQCC-N20					Not Qualified
74HC259PW,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	255 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	5 mm	HC/UH
74LV259PWDH-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH				5 mm	LV/LV-A/LVX/H
74HC259BQ-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		255 ns			.5 mm	125 Cel		LOW LEVEL	-40 Cel		QUAD		R-PQCC-N16	1	6 V	1 mm	2.5 mm		TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH				3.5 mm	HC/UH
74HC75PW,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	CMOS		2		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns	4 Amp	FF/Latches	.65 mm	125 Cel		HIGH LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
HEF4042BTD-T	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		4		5		50 pF	SMALL OUTLINE		260 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE				9.9 mm	4000/14000/40000
74HC259DB-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1		5			SMALL OUTLINE, SHRINK PITCH		255 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4			6.2 mm	HC/UH
74HCT75N	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	CMOS		2		5		50 pF	IN-LINE		45 ns			2.54 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL	60 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						21.6 mm	HCT
74HCT75PW	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	CMOS		2		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		45 ns			.65 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL	60 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V						5 mm	HCT
74AUP1G373GW-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1		1.1			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		25.9 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G6	1	3.6 V	1.1 mm	1.25 mm		TRUE	.8 V			e3	30	260	2 mm	AUP/ULP/V
74HCT75NB	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	CMOS		2		5		50 pF	IN-LINE		45 ns			2.54 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						19.025 mm	HCT
74AHCT259D	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	12 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4	30	260	9.9 mm	AHCT/VHCT
74HCT259PW,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	57 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	5 mm	HCT
HEF4042BDF	NXP Semiconductors	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	CMOS		4		5		50 pF	IN-LINE		260 ns			2.54 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE					4000/14000/40000
74AHCT259D,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	12 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4	30	260	9.9 mm	AHCT/VHCT
74HC259PW	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	255 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	5 mm	HC/UH
74AHCT259PW,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	12 ns	8 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	5 mm	AHCT/VHCT
74HC259BQ,115	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	280 ns	4 Amp	FF/Latches	.5 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-N16	1	6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	3.5 mm	HC/UH
74LV259BQ,115	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1	CMOS		1	TUBE	3.3	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	60 ns	6 Amp	FF/Latches	.5 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	QUAD		R-XQCC-N16	1	3.6 V	1 mm	2.5 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	3.5 mm	LV/LV-A/LVX/H
74LV259N	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		1		3.3	3.3	50 pF	IN-LINE	DIP16,.3	60 ns	6 Amp	FF/Latches	2.54 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		3.6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH	e4			19.025 mm	LV/LV-A/LVX/H
74LVC259PW	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		5.8 ns			.65 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V		1:8 DMUX FOLLOWED BY LATCH				5 mm	LVC/LCX/Z
74HCT259PW-Q100,11	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	57 ns		FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH				5 mm	HCT
74HC75DB-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	CMOS		2		5		50 pF	SMALL OUTLINE, SHRINK PITCH		190 ns			.65 mm	125 Cel		HIGH LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4			6.2 mm	HC/UH
HEF4724BPN	NXP Semiconductors	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		1		5		50 pF	IN-LINE		230 ns			2.54 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				21.6 mm	4000/14000/40000
74AHCT259D-Q100J	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V						9.9 mm	AHCT/VHCT/VT
74LV259DB-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	6 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH	e4			6.2 mm	LV/LV-A/LVX/H
74HC75DB	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	CMOS		2		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	190 ns	4 Amp	FF/Latches	.65 mm	125 Cel		HIGH LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	HC/UH
74HC259D-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1		5			SMALL OUTLINE		255 ns			1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH				9.9 mm	HC/UH
74HCT259DB,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	57 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	HCT
74AHC259PW-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	CMOS		1	TR	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			5 mm	AHC
74AHCT259PW	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	12 ns	8 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	5 mm	AHCT/VHCT
FM573-P	Infineon Technologies	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		8			3/5	50 pF	IN-LINE	DIP20,.3		8 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
FM573-S	Infineon Technologies	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		8			3/5	50 pF	SMALL OUTLINE	SOP20,.4		8 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20					Not Qualified	TRUE								573
SAB8283-P	Infineon Technologies	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	BIPOLAR		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T20					Not Qualified					e0
SAB8282A-P	Infineon Technologies	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	BIPOLAR		8		5	5		IN-LINE	DIP20,.3		32 Amp	FF/Latch	2.54 mm	70 Cel	3-STATE		0 Cel	TIN LEAD	DUAL		R-PDIP-T20					Not Qualified			100 mA		e0
SAB8282-P	Infineon Technologies	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	BIPOLAR		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T20					Not Qualified					e0
SAB8283A-P	Infineon Technologies	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	BIPOLAR		8		5	5		IN-LINE	DIP20,.3		32 Amp	FF/Latch	2.54 mm	70 Cel	3-STATE		0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T20					Not Qualified			90 mA		e0
935292863132	Nexperia	D LATCH												TR, 7 INCH														NICKEL PALLADIUM GOLD				1									e4	30	260
935291738132	Nexperia	D LATCH												TR, 7 INCH														NICKEL PALLADIUM GOLD				1									e4	30	260
935281332132	Nexperia	D LATCH																										TIN				1									e3	30	260
935280621125	Nexperia	D LATCH												TR, 7 INCH														TIN				1									e3	30	260
935298826118	Nexperia	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1	TR, 13 INCH	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		57 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V			e4	30	260	5 mm	HCT
935280622115	Nexperia	D LATCH												TR, 7 INCH														NICKEL PALLADIUM GOLD				1									e4	30	260
935298824115	Nexperia	D LATCH	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1	TR, 7 INCH	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		57 ns			.5 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD		R-PQCC-N16	1	5.5 V	1 mm	2.5 mm		TRUE	4.5 V			e4	30	260	3.5 mm	HCT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.