20 Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74ALS580JP4	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-XDIP-T20
SN74LS398N-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		4		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	13 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER				24.325 mm	LS
SN74HC564NP3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS					2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20
SN74HC174FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		CMOS					2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74F377D	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4		20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20		5.5 V			Not Qualified	TRUE	4.5 V	90 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED		F/FAST
SN74HC259FN	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		8			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			-40 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AS113FN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL							CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74F377DR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8		5			SMALL OUTLINE						70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20		5.5 V			Not Qualified	TRUE	4.5 V	90 mA	WITH HOLD MODE					F/FAST
SN74ABT377APWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	NOT SPECIFIED	260	6.5 mm	ABT
SN74HCT533DW3	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20
SN74HCT373FH	Texas Instruments	D LATCH	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		8		5	5		CHIP CARRIER	LCC20,.35SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74LVT273PWLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	5.9 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G20		3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V	12 mA			NOT SPECIFIED	NOT SPECIFIED	6.5 mm	LVT
SN74ALS990N	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	26 ns	24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	HIGH LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	70 mA	WITH READ-BACK	e4			24.325 mm	ALS
SN74AS112FN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL							CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
CD74ACT273EE4	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	85000000 Hz	CMOS		8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	13.5 ns	24 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	NOT SPECIFIED	25.4 mm	ACT
SN74LS113AFN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	30000000 Hz	TTL				5	5		CHIP CARRIER	LDCC20,.4SQ		8 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20								6 mA
SN74ALS990DWR	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	26 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	70 mA	WITH READ-BACK	e4	30	260	12.8 mm	ALS
SN74HC373JP4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-XDIP-T20
SN74HCT573FN3	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		8		5	5		CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-PQCC-J20
SN74LV273APWG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8	TUBE	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	27 ns	12 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA		e4	30	260	6.5 mm	LV/LV-A/LVX/H
SN74ALS273JP4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-XDIP-T20
5962-01-365-1412	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			0 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC273J	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS					2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T20					Not Qualified
SN74ALS574ANP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20
SN74LV373ATNS	Texas Instruments	D LATCH	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3		16 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1				Not Qualified					e4	30	260
5962-3832504BSX	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL		1		5			FLATPACK		42 ns				125 Cel		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F20		5.5 V			Not Qualified	TRUE	4.5 V							LS
SN74ALS374DWP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	35000000 Hz	TTL				5	5		SMALL OUTLINE	SOP20,.4		24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20								31 mA
SN74HC273PWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	21000000 Hz	CMOS		8	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	200 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		DUMMY VAL	e4	30	260	6.5 mm	HC/UH
SN74LVTH273DWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.4	5.5 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	NOT SPECIFIED	260	12.8 mm	LVT
SN74HC174FH4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	6		CMOS					2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20
5962-01-208-9448	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS373J	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-XDIP-T20					Not Qualified
SN74AS574FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8	90000000 Hz	TTL				5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ		48 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS991N	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		8		5		50 pF	IN-LINE	DIP20,.3	23 ns		FF/Latches	2.54 mm	70 Cel	3-STATE	HIGH LEVEL	0 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	INVERTED	4.5 V	75 mA	WITH READ-BACK		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ALS
SN74HCT273PWTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	42 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	6.5 mm	HCT
SN74LS377J	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		8		5	5	15 pF	IN-LINE	DIP20,.3	27 ns		FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	28 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN74AHC273DGV	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25,16	19.5 ns			.4 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V						5 mm	AHC
SN74276JP4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	4		TTL							IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	0 Cel		DUAL		R-XDIP-T20
5962-85154012A	Texas Instruments	D FLIP-FLOP	MILITARY		20			CERAMIC, METAL-SEALED COFIRED		1		CMOS		4		5			CHIP CARRIER		10 ns				125 Cel		POSITIVE EDGE	-55 Cel		QUAD	95 MHz			5.5 V			Not Qualified	TRUE	4.5 V		FOUR 2:1 MUX FOLLOWED BY REGISTER					ACT
JM38510/30102B2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2	25000000 Hz	TTL	MIL-M-38510 Class B	1	TUBE	5		15 pF	CHIP CARRIER		40 ns	8 Amp		1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	QUAD	25 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	COMPLEMENTARY	4.5 V	8 mA		e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	LS
SN74HCT564FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		CMOS				5	5		CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74LS113AFN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	30000000 Hz	TTL		2		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	20 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74AS574J4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8	90000000 Hz	TTL				5	5	50 pF	IN-LINE	DIP20,.3		48 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-XDIP-T20
SN74LV273DW	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.4	26 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2.7 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LV/LV-A/LVX/H
SN74HC377DWR-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5		50 pF	SMALL OUTLINE		40 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE				12.8 mm	HC/UH
SN74HC533NP1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74LS273N-10	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		8		5		15 pF	IN-LINE		27 ns			2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	27 mA					24.325 mm	LS
SN74HC564NP1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS					2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.