20 Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
5962-8752502CX	Texas Instruments	D FLIP-FLOP	MILITARY		20			CERAMIC, METAL-SEALED COFIRED			1		CMOS		4		5			CHIP CARRIER		10 ns				125 Cel		POSITIVE EDGE	-55 Cel		QUAD	95 MHz			5.5 V			Not Qualified	TRUE	4.5 V		FOUR 2:1 MUX FOLLOWED BY REGISTER					ACT
SN74HC563DW3	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20
SN74LS273DW3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		TTL				5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20
SN74F533N3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3		24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDIP-T20								61 mA
SN74ALS573N1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74ALS114AFN-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		2		5		50 pF	CHIP CARRIER		19 ns			1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	4.5 mA	WITH INDIVIDUAL SET INPUTS				8.9662 mm	ALS
SN74ALS580NP3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDIP-T20
SN74HCT534N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8	25000000 Hz	CMOS				5	5	50 pF	IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified
CD74AC273E	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	71000000 Hz	CMOS		8	TUBE	3.3	3.3/5	50 pF	IN-LINE	DIP20,.3	169 ns	24 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	1.5 V	.16 mA		e4	NOT SPECIFIED	NOT SPECIFIED	25.4 mm	AC
SN74HCS273PWR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	120 Hz	CMOS		8	TR	4.5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	34.6 ns	7.8 Amp		.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	135 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	6.5 mm	HC
5962-9686101Q2X	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	2		CMOS	MIL-PRF-38535 Class Q	1		5			CHIP CARRIER		10 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	80 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	AHCT/VHCT
SN74273NP1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL							IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74ALS576N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74S374DW3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		TTL				5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20
SN74ALS113AFN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	2		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74HC379FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	4		CMOS							CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
CD74FCT273M96E4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		BICMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	13 ns	48 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	FCT
SN74F273DW-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE					1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	145 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V						12.8 mm	F/FAST
SN74LVTH273NSR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3	5.5 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	12.6 mm	LVT
SN74AS374N1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8	125000000 Hz	TTL				5	5		IN-LINE	DIP20,.3		48 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20					Not Qualified			128 mA
5962-7801001VSA	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-PRF-38535 Class V	8		5		15 pF	FLATPACK		42 ns		FF/Latch	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	30 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Not Qualified	TRUE	4.5 V	27 mA					13.09 mm	LS
SN74LV273ADBLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8	TR	2.5	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	25 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	LV/LV-A/LVX/H
JM38510/32504BSA	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1	30000000 Hz	TTL	MIL-M-38510 Class B	8	TUBE	5		15 pF	FLATPACK		27 ns	8 Amp		1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	30 MHz	R-GDFP-F20		5.5 V	2.45 mm	6.92 mm	Not Qualified	TRUE	4.5 V	28 mA		e0			13.09 mm	LS
5962-9761601Q2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	2	100000000 Hz	CMOS	MIL-PRF-38535 Class Q	1	TUBE	2.7	3.3	50 pF	CHIP CARRIER	LCC20,.35SQ	6 ns	24 Amp	FF/Latch	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	QUAD	100 MHz	S-CQCC-N20		3.6 V	2.03 mm	8.89 mm	Qualified	COMPLEMENTARY	2 V	.01 mA		e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	LVC/LCX/Z
SN74HC534DW3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		CMOS					2/6		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20
SN74LS363N	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LVTH273DBRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	5.5 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	2.7 V			e4	30	260	7.2 mm	LVT
SN74HCT573J4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-XDIP-T20
5962-9221902M2X	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		CMOS	MIL-STD-883	8		5		50 pF	CHIP CARRIER		8.3 ns	32 Amp		1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V	1.905 mm	8.89 mm	Qualified	TRUE	4.5 V	16.8 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	FCT
5962-89695012X	Texas Instruments	J-K FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	UNSPECIFIED		YES	2		CMOS	MIL-STD-883	2		4.5			CHIP CARRIER		225 ns				125 Cel		NEGATIVE EDGE	-55 Cel		QUAD	21 MHz	S-XQCC-N20		6 V			Not Qualified	COMPLEMENTARY	2 V							HC/UH
SN74HCT273PWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	42 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	6.5 mm	HCT
SN74ALS533FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74LS364J	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS580ANP3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDIP-T20
CD74ACT273SM96E4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	13.5 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	7.2 mm	ACT
SN74ALS533DW3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDSO-G20
SN74ALS580J4	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-XDIP-T20
SN74HC373FN	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ABT377ADBRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TR	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	7.2 mm	ABT
SN74HC533NP3	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20
SN74LS377DWE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	30000000 Hz	TTL		8	TUBE	5	5	15 pF	SMALL OUTLINE	SOP20,.4	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	28 mA	WITH HOLD MODE	e4	30	260	12.8 mm	LS
SN74ALS576NP1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74HCT374N1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		CMOS				5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74AHCT273NSRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	11 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	65 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.6 mm	AHCT/VHCT/VT
SN74ALS563NP1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
JM38510/07106B2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		4		5			CHIP CARRIER					1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	COMPLEMENTARY	4.5 V						8.89 mm	S
SN74ALS990FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		8		5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	26 ns		FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	70 mA	WITH READ-BACK		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	ALS
SN74ALS374FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	8		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.