8 Latches & Flip-Flops 513

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100EP31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	100E
SN74LVC2G74YZPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	14.4 ns	32 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	200 MHz	R-XBGA-B8	1	5.5 V	.5 mm	.9 mm	Not Qualified	COMPLEMENTARY	1.65 V	.01 mA		e1	NOT SPECIFIED	260	1.9 mm	LVC/LCX/Z
SN74LVC2G80DCUR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	16000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	14.5 ns	32 Amp	FF/Latch	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	INVERTED	1.65 V	.005 mA		e3	NOT SPECIFIED	260	2.3 mm	LVC/LCX/Z
74LVC2G74GS,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,14	13.4 ns	24 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N8	1	5.5 V	.35 mm	1 mm	Not Qualified	COMPLEMENTARY	1.65 V			e3	30	260	1.35 mm	LVC/LCX/Z
SN74AUP1G74RSER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1	40000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	27 ns	4 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	180 MHz	S-PQCC-N8	1	3.6 V	.6 mm	1.5 mm	Not Qualified	COMPLEMENTARY	.8 V	.0009 mA		e4	30	260	1.5 mm	AUP/ULP/V
FM1106-GA	Cypress Semiconductor	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			AEC-Q100	1		3			SMALL OUTLINE		50 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	.9 MHz	R-PDSO-G8		3.6 V	1.75 mm	3.9 mm		TRUE	2.7 V				NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1106
SN74AUC2G80YZPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	3.9 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	275 MHz	R-XBGA-B8	1	2.7 V	.5 mm	.9 mm	Not Qualified	INVERTED	.8 V	.01 mA		e1	NOT SPECIFIED	260	1.9 mm	AUC
SN74LVC2G80DCURG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	13.9 ns	32 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	INVERTED	1.65 V	.005 mA		e4	NOT SPECIFIED	260	2.3 mm	LVC/LCX/Z
MC100EP51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.45 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
TC7WZ74FK,LJ(CT	Toshiba	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.8			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		26 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	162 MHz	R-PDSO-G8		5.5 V	.9 mm	2 mm		COMPLEMENTARY	1.65 V				30	260	2.3 mm	LVC/LCX/Z
MC100EP31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.45 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
SY10EP51VKG	Microchip Technology	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.37 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	3000 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	40	260	3 mm	10E
74LVC2G74DP-Q100H	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS	AEC-Q100	1	TR	1.8	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	13.4 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	1.65 V						3 mm	LVC/LCX/Z
MC100EP52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TUBE	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
NC7SZ74L8X-L22185	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3	15 pF	CHIP CARRIER	LCC8,.06SQ,20	13 ns	32 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	250 MHz	S-XQCC-N8	1	5.5 V	.55 mm	1.6 mm	Not Qualified	COMPLEMENTARY	1.65 V	50 mA		e4	NOT SPECIFIED	NOT SPECIFIED	1.6 mm	LVC/LCX/Z
NC7SZ74L8X_F113	Onsemi	D FLIP-FLOP		NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1		CMOS		1	TR	1.8		50 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	13 ns	32 Amp		.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N8		5.5 V	.55 mm	1.6 mm		COMPLEMENTARY	1.65 V	50 mA					1.6 mm	LVC/LCX/Z
SN74LVC2G74DCU	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		14.4 ns			.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G8		5.5 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	1.65 V				NOT SPECIFIED	NOT SPECIFIED	2.3 mm	LVC/LCX/Z
SN74LVC2G80DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	13.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	INVERTED	1.65 V			e4	30	260	2.3 mm	LVC/LCX/Z
TC7WH74FK,LJ(CT	Toshiba	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		3.3			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		19.5 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G8		5.5 V	.9 mm	2 mm		COMPLEMENTARY	2 V						2.3 mm	LV/LV-A/LVX/H
74LVC2G74DP	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1		1.8	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	13.4 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	200 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	3 mm	LVC/LCX/Z
74AUP2G79GD,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,20	25.6 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	2 mm	Not Qualified	TRUE	.8 V			e4	30	260	3 mm	AUP/ULP/V
74AUP2G79GN	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		1.1			SMALL OUTLINE		25.6 ns			.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.35 mm	1 mm	Not Qualified	TRUE	.8 V			e3			1.2 mm	AUP/ULP/V
74AUP2G79GS	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE		25.6 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.35 mm	1 mm	Not Qualified	TRUE	.8 V			e3			1.35 mm	AUP/ULP/V
74LVC2G74GN	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8			SMALL OUTLINE		13.4 ns			.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N8	1	5.5 V	.35 mm	1 mm	Not Qualified	COMPLEMENTARY	1.65 V			e3			1.2 mm	LVC/LCX/Z
MC10EP51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.37 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
MC10EP52MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	4000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.38 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V		30	260	2 mm	10E
SY10EL31ZCTR	Microchip Technology	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TR	-5.2			SMALL OUTLINE	SOP8,.25	.59 ns			1.27 mm	85 Cel		POSITIVE EDGE	0 Cel		DUAL	2200 MHz	R-PDSO-G8		-5.5 V	1.73 mm	3.94 mm		COMPLEMENTARY	-4.75 V	32 mA					4.93 mm	10EL
SY10EP51VZITR	Micrel	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.37 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	3000 MHz	R-PDSO-G8	1	5.5 V	1.73 mm	3.94 mm	Not Qualified	COMPLEMENTARY	3 V	40 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	240	4.93 mm	10E
TC7WH74FU(TE12L,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS			TR		2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16		4 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8					Not Qualified
74LVC1G74GS,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,14	13.4 ns	24 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N8	1	5.5 V	.35 mm	1 mm	Not Qualified	COMPLEMENTARY	1.65 V			e3	30	260	1.35 mm	LVC/LCX/Z
NC7SV74K8X	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	9.9 ns	2 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	250 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.9 V			e3	30	260	2.3 mm	AUP/ULP/V
SN74AUC1G74DCUR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e3	NOT SPECIFIED	260	2.3 mm	AUC
SN74AUC1G74DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.3 mm	AUC
SN74AUC1G74DCURG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.3 mm	AUC
SN74AUC2G80DCTR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	1.3 mm	2.8 mm	Not Qualified	INVERTED	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.95 mm	AUC
SN74AUP1G74DQER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	40000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,14	27 ns	4 Amp	FF/Latches	.35 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	180 MHz	R-PDSO-N8	1	3.6 V	.4 mm	1 mm	Not Qualified	COMPLEMENTARY	.8 V	.0009 mA		e4	30	260	1.4 mm	AUP/ULP/V
SN74AUP1G74YFPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	40000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,16	27 ns	4 Amp	FF/Latches	.4 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	180 MHz	R-XBGA-B8	1	3.6 V	.5 mm		Not Qualified	COMPLEMENTARY	.8 V	.0009 mA		e1	NOT SPECIFIED	260		AUP/ULP/V
SN74LVC2G79DCUR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	9.9 ns	32 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	TRUE	1.65 V	.005 mA		e3	NOT SPECIFIED	260	2.3 mm	LVC/LCX/Z
SY100EL31ZG	Microchip Technology	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1					SMALL OUTLINE	TSSOP8,.24	.645 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	2200 MHz	R-PDSO-G8	3		1.73 mm	3.94 mm	Not Qualified	COMPLEMENTARY		37 mA		e4			4.93 mm	100EL
TC7W74FU(TE12L,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	190 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN SILVER	DUAL	25 MHz	R-PDSO-G8	1	6 V	1.2 mm	2.8 mm	Not Qualified	COMPLEMENTARY	2 V			e2		260	2.9 mm	HC/UH
74AUP1G74GT,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,20	23.3 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	1 mm	Not Qualified	COMPLEMENTARY	.8 V			e3	30	260	1.95 mm	AUP/ULP/V
74LVC1G74DP-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		13.4 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	200 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm		COMPLEMENTARY	1.65 V			e4			3 mm	LVC/LCX/Z
74LVC2G74GT,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,20	13.4 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N8	1	5.5 V	.5 mm	1 mm	Not Qualified	COMPLEMENTARY	1.65 V			e3	30	260	1.95 mm	LVC/LCX/Z
MC100EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-4.5		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EP52DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC10EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
74AUP2G80GT	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,20	27.2 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	1 mm	Not Qualified	INVERTED	.8 V			e3	30	260	1.95 mm	AUP/ULP/V

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.