8 Latches & Flip-Flops 513

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LVC2G80DCTR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	13.9 ns	32 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	1.3 mm	2.8 mm	Not Qualified	INVERTED	1.65 V	.005 mA		e4	NOT SPECIFIED	260	2.95 mm	LVC/LCX/Z
SN74LVC1G74YZTR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	3.3	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	14.4 ns	24 Amp	FF/Latch	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		BOTTOM	200 MHz	R-PBGA-B8		5.5 V	.625 mm		Not Qualified	COMPLEMENTARY	1.65 V				NOT SPECIFIED	NOT SPECIFIED		LVC/LCX/Z
SN74LVC2G74YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	14.4 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	200 MHz	R-XBGA-B8		5.5 V	.5 mm	.9 mm	Not Qualified	COMPLEMENTARY	1.65 V				NOT SPECIFIED	NOT SPECIFIED	1.9 mm	LVC/LCX/Z
SN74LVC1G74DCUR-P	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	3.3	3.3		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	14.4 ns	24 Amp	FF/Latch	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G8		5.5 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	1.65 V						2.3 mm	LVC/LCX/Z
SN74AUC2G80DCTRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	3.9 ns	5 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	1.3 mm	2.8 mm	Not Qualified	INVERTED	.8 V			e4	30	260	2.95 mm	AUC
SN74LVC2G79YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	9.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-XBGA-B8		5.5 V	.5 mm	.9 mm	Not Qualified	TRUE	1.65 V				NOT SPECIFIED	NOT SPECIFIED	1.9 mm	LVC/LCX/Z
SN74AUC2G79DCTR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	1.3 mm	2.8 mm	Not Qualified	TRUE	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.95 mm	AUC
SN74LVC2G74YEAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	14.4 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	200 MHz	R-XBGA-B8		5.5 V	.5 mm	.9 mm	Not Qualified	COMPLEMENTARY	1.65 V				NOT SPECIFIED	NOT SPECIFIED	1.9 mm	LVC/LCX/Z
SN74LVC2G79DCTRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	9.9 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	1.3 mm	2.8 mm	Not Qualified	TRUE	1.65 V			e4	30	260	2.95 mm	LVC/LCX/Z
SN74AUP2G79YFPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	2	80000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,16	24 ns	4 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	260 MHz	R-XBGA-B8	1	3.6 V	.5 mm	.77 mm	Not Qualified	TRUE	.8 V	.0009 mA		e1	NOT SPECIFIED	260	1.57 mm	AUP/ULP/V
SN74AUP2G79RSER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	2	80000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	24 ns	4 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	QUAD	260 MHz	S-XQCC-N8	1	3.6 V	.6 mm	1.5 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	1.5 mm	AUP/ULP/V
SN74AUP2G79DQER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HSON	RECTANGULAR	PLASTIC/EPOXY	YES	2	80000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, HEAT SINK/SLUG	SOLCC8,.04,14	24 ns	4 Amp	FF/Latches	.35 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	260 MHz	R-PDSO-N8	1	3.6 V	.4 mm	1 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	1.4 mm	AUP/ULP/V
SN74LVC2G74BDCT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		7.1 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8		5.5 V	1.3 mm	2.8 mm	Not Qualified	COMPLEMENTARY	1.65 V						2.95 mm	LVC/LCX/Z
SN74AUC2G79DCURG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	TRUE	.8 V			e4	30	260	2.3 mm	AUC
SN74LVC2G79DCURG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	9.9 ns	32 Amp	FF/Latch	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	TRUE	1.65 V	.005 mA		e4	NOT SPECIFIED	260	2.3 mm	LVC/LCX/Z
SN74LVC2G79DCTR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	9.9 ns	32 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	1.3 mm	2.8 mm	Not Qualified	TRUE	1.65 V	.005 mA		e4	NOT SPECIFIED	260	2.95 mm	LVC/LCX/Z
SN74AUC1G74YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	3.8 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-XBGA-B8		2.7 V	.5 mm	.9 mm	Not Qualified	COMPLEMENTARY	.8 V				NOT SPECIFIED	NOT SPECIFIED	1.9 mm	AUC
SN74AUP1G74YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	40000000 Hz	CMOS		1	TR	1.2	0.8/3.6	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	27 ns	.02 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	180 MHz	R-PBGA-B8		3.6 V	.5 mm	.9 mm	Not Qualified	COMPLEMENTARY	.8 V						1.9 mm	AUP/ULP/V
SN74AUC2G79DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	TRUE	.8 V			e4	30	260	2.3 mm	AUC
MAX9381EUA+T	Analog Devices	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1		BIPOLAR		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		405 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn) - annealed	DUAL	3000 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	2.25 V		ECL MODE OPERATING RANGE:VEE=-2.25 TO -5.5V	e3	30	260	3 mm	9381
MAX9381ESA+	Analog Devices	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		1		3.3			SMALL OUTLINE		405 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn) - annealed	DUAL	3000 MHz	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.25 V		ECL MODE OPERATING RANGE:VEE=-2.25 TO -5.5V	e3	30	260	4.9 mm
MAX9381ESA+T	Analog Devices	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		1		3.3			SMALL OUTLINE		405 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn) - annealed	DUAL	3000 MHz	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.25 V		ECL MODE OPERATING RANGE:VEE=-2.25 TO -5.5V	e3	30	260	4.9 mm
MAX9381EUA+	Analog Devices	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1		BIPOLAR		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		405 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn) - annealed	DUAL	3000 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	2.25 V		ECL MODE OPERATING RANGE:VEE=-2.25 TO -5.5V	e3	30	260	3 mm	9381
NLVX1G74MUTCG	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1	175000000 Hz	CMOS	AEC-Q100	1	TR	2.3	3.3		CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	13 ns	24 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	250 MHz	S-XQCC-N8	1	5.5 V	.6 mm	1.6 mm	Not Qualified	COMPLEMENTARY	1.65 V				30	260	1.6 mm	1G
NLX1G74MUTCG	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1				1		2.3			CHIP CARRIER, VERY THIN PROFILE		13 ns			.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	250 MHz	S-XQCC-N8	1	5.5 V	.6 mm	1.6 mm	Not Qualified	COMPLEMENTARY	1.65 V				30	260	1.6 mm	CMOS
MC3100EP35DTG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL					-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19			FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8					Not Qualified	COMPLEMENTARY		50 mA						100EP
MC3100EP35DT	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL					-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19			FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8					Not Qualified	COMPLEMENTARY		50 mA						100EP
NLV18SZ74USG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS	AEC-Q100	1	TR	3.3		50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	14.5 ns	24 Amp		.5 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	250 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm		COMPLEMENTARY	1.65 V	.01 mA		e4	30	260	2.3 mm	LVC/LCX/Z
NLV17SZ74MQ1TCG	Onsemi	D FLIP-FLOP	MILITARY	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1		CMOS	AEC-Q100	1	TR	2.3		50 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	13 ns	32 Amp		.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	250 MHz	S-XQCC-N8	1	5.5 V	.6 mm	1.6 mm		COMPLEMENTARY	1.65 V	100 mA			40	260	1.6 mm	LVC/LCX/Z
MC10EP35DR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	TR	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	10E
MC10EL35DT	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC100LVEL51DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.52 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2800 MHz	S-PDSO-G8		3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	3 mm	100LVEL
MC10EP52D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL		R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	235	4.9 mm	10E
MC100EL31MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2000000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.59 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			2 mm	100EL
MC100LVEL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC100EP31DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e0		235	3 mm	100E
MC100LVEL31DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2900 MHz	S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	3 mm	100LVEL
MC10EL52D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1		5	-5.2		SMALL OUTLINE	SOP8,.25	.465 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL	2200 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	4.9 mm	10EL
MC100EP31DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e0		235	3 mm	100E
MC10EL31MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2000000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.59 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			2 mm	10EL
MC100EL31D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	100EL
MC100EL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	100EL
MC10EP51MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.37 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-XDSO-N8		5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0			2 mm	10E
MC10EL52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC100EL52DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	100EL
MC100EP31D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e0		235	4.9 mm	100E
MC100EP51DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.45 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn90Pb10)	DUAL		S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	235	3 mm	100E
MC100EL31DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.